• Practice
  • About 15 min
  • 5 practice questions

Getting ready: earlier constructions and the idea behind the new ones

Recall the four triangle constructions from earlier standards, construct a perpendicular bisector, and understand the two ideas used in every new construction: a rough figure first, and a point that lies on two lines is where they meet.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List the four triangle constructions learnt in earlier standards.
  • Construct the perpendicular bisector of a segment with ruler and compass.
  • Explain why a point equidistant from two points lies on the perpendicular bisector.
  • Plan a construction with a labelled rough figure before drawing.

A triangle has six parts: three sides and three angles. In earlier standards you constructed a triangle when three suitable parts were given directly. In this chapter only two parts are given directly, and the third piece of information is a sum, a difference or a perimeter of sides. The trick is to turn that extra information into a point that we can locate.

Constructions you already know

  • A triangle when its three sides are given.
  • A triangle when its base and the two angles on the base are given.
  • A triangle when two sides and the included angle are given.
  • A right-angled triangle when its hypotenuse and one side are given.

The key tool: the perpendicular bisector

Recall the perpendicular bisector theorem from Chapter 3: every point on the perpendicular bisector of a segment is equidistant from its end points, and every point equidistant from the end points lies on the perpendicular bisector. So if we know that a point A satisfies AD = AC, we know A lies on the perpendicular bisector of seg CD.

Worked example 1: constructing a perpendicular bisector

Construct the perpendicular bisector of seg XY of length 6 cm.

  1. Draw seg XY of length 6 cm with a ruler.
  2. Open the compass to more than half of XY, say 4 cm.
  3. With centre X draw arcs above and below XY.
  4. With centre Y and the same opening, draw arcs cutting the first two arcs. Name the crossing points P and Q.
  5. Draw line PQ. It is the perpendicular bisector of seg XY; it cuts XY at its midpoint M, with XM = MY = 3 cm.

Perpendicular bisector with compass

  1. Draw the segment Seg XY = 6 cm.
  2. Arcs from X Radius more than half of XY.
  3. Arcs from Y Same radius; mark crossings P and Q.
  4. Join P and Q Line PQ ⊥ XY through its midpoint.

Locating a point as the meeting of two lines

We often use this simple property: if a point lies on two different lines, it is their point of intersection. In each new construction we find two lines that the missing vertex A must lie on. Usually one is a ray drawn at the given angle and the other is a perpendicular bisector. Where they meet is A.

Always start with a rough figure

Before using instruments, draw a quick freehand triangle, name its vertices as in the question, and mark every given measure on it. The rough figure shows where the extra point D should go and which segment needs a perpendicular bisector. Then write the steps of construction and draw the fair figure accurately.

Worked example 2: a known construction (base and two angles)

Construct △LMN with MN = 6 cm, ∠M = 50° and ∠N = 60°.

  1. Draw a rough figure and mark MN = 6 cm, ∠M = 50°, ∠N = 60°.
  2. Draw seg MN of length 6 cm.
  3. At M draw a ray making 50° with seg MN, on the upper side.
  4. At N draw a ray making 60° with seg NM, on the same side.
  5. Name the point where the two rays meet as L. △LMN is the required triangle. (Check: ∠L should measure about 70°.)

New constructions in this chapter: find two lines on which the missing vertex must lie, and take their point of intersection. A point equidistant from C and D lies on the perpendicular bisector of seg CD.

Key takeaways: three suitable parts fix a triangle. The perpendicular bisector of a segment contains exactly the points equidistant from its ends, and you can draw it with two pairs of equal arcs. A point that lies on two lines is their intersection. Always draw and label a rough figure, then write numbered steps, then draw the fair figure.

Check your understanding

  1. 1. Every point on the perpendicular bisector of seg CD is

    1. on seg CD
    2. equidistant from C and D
    3. nearer to C than to D
    4. at a distance CD from C
    Show answer

    Answer: B. By the perpendicular bisector theorem, every point on the perpendicular bisector of a segment is equidistant from its end points.

  2. 2. While drawing the perpendicular bisector of a 7 cm segment, which compass opening will work for the arcs?

    1. 3 cm
    2. 3.5 cm
    3. 2 cm
    4. 5 cm
    Show answer

    Answer: D. The arcs from both ends must cross, so the radius must be more than half the segment, that is more than 3.5 cm. Of the choices only 5 cm works.

  3. 3. Point A satisfies AD = AC. On which line must A lie?

    1. The perpendicular bisector of seg CD
    2. Seg CD itself
    3. The bisector of ∠C
    4. A line parallel to CD
    Show answer

    Answer: A. A point equidistant from C and D lies on the perpendicular bisector of seg CD (Part II of the perpendicular bisector theorem).

  4. 4. In this chapter's constructions, how is the missing vertex usually located?

    1. By measuring with a protractor only
    2. By guessing and checking
    3. As the intersection of a ray drawn at the given angle and a perpendicular bisector
    4. By folding the paper
    Show answer

    Answer: C. The vertex lies on the ray at the given angle and also on a perpendicular bisector; a point on two lines is their point of intersection.

  5. 5. Which set of information did you learn to construct in an earlier standard?

    1. Base, a base angle and the sum of the other two sides
    2. Two sides and the included angle
    3. Perimeter and the two base angles
    4. Base, a base angle and the difference of the other two sides
    Show answer

    Answer: B. Constructing a triangle from two sides and the included angle was learnt earlier. The other three are the new constructions of this chapter.

Privacy · Terms · Refunds · Delivery