• Practice
  • About 16 min
  • 5 practice questions

Construction II (case 2): the side at the given angle is the shorter one

Construct a triangle when its base, an angle on the base and the difference of the other two sides are given, in the case where the side next to the given angle is shorter, using the opposite ray.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Recognise from AC − AB > 0 that AB, the side at ∠B, is the shorter side.
  • Mark D on the opposite ray, below the base.
  • Follow the steps of construction in order.
  • Decide which case of Construction II a question belongs to.

In the second case of Construction II the side next to the given angle is the shorter one. We know BC, ∠B and AC − AB, with AC > AB. Marking the difference on ray BA would put D beyond the wrong point, so we use the opposite ray instead.

The idea (rough figure)

Draw a rough △ABC with ray BT at the given angle ∠B. Extend ray TB beyond B to get the opposite ray BS, which goes below the base. Mark D on ray BS so that BD = AC − AB. Now A, B and D are collinear with B between A and D, so AD = AB + BD = AB + (AC − AB) = AC. So AD = AC, and A lies on the perpendicular bisector of seg DC, as well as on ray BT.

Worked example 1

Construct △ABC in which BC = 6 cm, ∠B = 50° and AC − AB = 2.5 cm.

  1. Draw a rough figure: base BC = 6 cm, ray BT at 50°, its opposite ray BS below BC, and D on ray BS with BD = 2.5 cm.
  2. Draw seg BC of length 6 cm.
  3. At B draw ray BT making an angle of 50° with seg BC.
  4. Extend TB beyond B to draw the opposite ray BS.
  5. On ray BS mark point D such that BD = 2.5 cm.
  6. Join D and C.
  7. Construct the perpendicular bisector of seg DC.
  8. Name the point where it meets ray BT as A. Join A and C. △ABC is the required triangle.

Construction II, case AC − AB

  1. Base BC Draw it.
  2. Ray BT at ∠B Given angle at B.
  3. Opposite ray BS Extend the ray through B.
  4. Mark D on ray BS BD = AC − AB.
  5. Bisect DC Perpendicular bisector meets ray BT at A.
  6. Join AC AD = AC, so the triangle is correct.

Check: in the fair figure AC should be longer than AB by 2.5 cm.

Which case is it?

Read the difference carefully. If the side at the given angle is first in the difference (for ∠B: AB − AC), it is the longer side: use case 1 and mark D on the ray itself. If the side at the given angle comes second (for ∠B: AC − AB), it is the shorter side: use case 2 and mark D on the opposite ray.

The two cases of Construction II (angle at B)

  • Case 1: AB − AC given
    • AB is longer
    • D on ray BA
    • BD = AB − AC
    • AD = AB − BD = AC
  • Case 2: AC − AB given
    • AB is shorter
    • D on the opposite ray of BA
    • BD = AC − AB
    • AD = AB + BD = AC

Worked example 2: an obtuse base angle

Construct △XYZ with YZ = 5.5 cm, ∠Y = 105° and XZ − XY = 2 cm. Here XY (at ∠Y) is shorter, so this is case 2.

  1. Draw seg YZ = 5.5 cm.
  2. At Y draw ray YT making 105° with seg YZ.
  3. Draw the opposite ray YS of ray YT and mark D on it with YD = 2 cm.
  4. Join DZ and construct its perpendicular bisector.
  5. Name the point where it meets ray YT as X. Join XZ. △XYZ is the required triangle.

Case 2 (side at the given angle is shorter): mark the difference on the OPPOSITE ray at the given angle; the vertex is where the perpendicular bisector of seg DC meets the ray at the given angle.

Key takeaways: when the side next to the given angle is the shorter one, D goes on the opposite ray, below the base. Then AD = AB + BD equals the longer side AC, so A is on the perpendicular bisector of DC. Decide the case from which side is longer, and keep the difference less than the base.

Check your understanding

  1. 1. Given BC, ∠B and AC − AB = 2 cm, where is D marked?

    1. On ray BA, 2 cm from B
    2. On the opposite ray of ray BA, 2 cm from B
    3. On seg BC, 2 cm from C
    4. On ray CA, 2 cm from C
    Show answer

    Answer: B. AB, the side at ∠B, is the shorter side, so this is case 2: D goes on the opposite ray of ray BA with BD = AC − AB = 2 cm.

  2. 2. In case 2, why is AD = AC?

    1. Because AD = AB − BD
    2. Because D is the midpoint of AC
    3. Because AD = AB + BD and BD = AC − AB
    4. Because ∠B is obtuse
    Show answer

    Answer: C. B lies between A and D, so AD = AB + BD = AB + (AC − AB) = AC.

  3. 3. A question gives YZ, ∠Y and XY − XZ. Which case is it?

    1. Case 1: D on ray YX
    2. Case 2: D on the opposite ray
    3. Construction I
    4. Construction III
    Show answer

    Answer: A. XY is the side at ∠Y and it comes first in the difference, so it is the longer side. That is case 1: mark D on ray YX itself.

  4. 4. In case 2, the perpendicular bisector of which segment gives the vertex A?

    1. Seg BC
    2. Seg AB
    3. Seg BD
    4. Seg DC
    Show answer

    Answer: D. D is on the opposite ray at B; A is equidistant from D and C, so the perpendicular bisector of seg DC meets the ray at ∠B in A.

  5. 5. In a fair figure for case 2 with AC − AB = 2.5 cm, AB measures 3.8 cm. What should AC measure?

    1. 1.3 cm
    2. 3.8 cm
    3. 6.3 cm
    4. 2.5 cm
    Show answer

    Answer: C. AC = AB + 2.5 = 3.8 + 2.5 = 6.3 cm.

Privacy · Terms · Refunds · Delivery