• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Constructions of Triangles

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 25 minutes. For each question draw a quick rough figure and mark where point D (or P and Q) would go before choosing an option. The questions cover all five lessons and are a little harder than the lesson checks. Check your answers only after you finish.

Final self-assessment

  1. 1. Which property is used to locate the vertex in every new construction of this chapter?

    1. A point on two lines is their point of intersection
    2. Opposite angles of a parallelogram are equal
    3. The angles of a quadrilateral add up to 360°
    4. A tangent is perpendicular to the radius
    Show answer

    Answer: A. Each construction finds two lines the vertex must lie on (a ray and a perpendicular bisector, or two rays) and takes their point of intersection.

  2. 2. To draw the perpendicular bisector of a 9 cm segment, the compass opening must be

    1. exactly 4.5 cm
    2. less than 4.5 cm
    3. exactly 9 cm only
    4. more than 4.5 cm
    Show answer

    Answer: D. The arcs from the two ends must cross, which needs a radius greater than half the segment, more than 4.5 cm.

  3. 3. Construct △ABC with BC = 5 cm, ∠B = 70°, AB + AC = 8.2 cm. In the fair figure AB measures 4.6 cm. What should AC measure?

    1. 3.4 cm
    2. 3.6 cm
    3. 4.6 cm
    4. 13.2 cm
    Show answer

    Answer: B. AB + AC = 8.2 cm, so AC = 8.2 − 4.6 = 3.6 cm.

  4. 4. Construct △PQR with QR = 5.2 cm, ∠Q = 45° and perimeter 13 cm. How long is QD on the ray at Q?

    1. 13 cm
    2. 5.2 cm
    3. 7.8 cm
    4. 18.2 cm
    Show answer

    Answer: C. PQ + PR = 13 − 5.2 = 7.8 cm, so QD = 7.8 cm and then the perpendicular bisector of DR gives P.

  5. 5. In Construction I (angle at B), which segment's perpendicular bisector is drawn?

    1. Seg DC
    2. Seg BD
    3. Seg BC
    4. Seg AD
    Show answer

    Answer: A. D is on the ray at B with BD = AB + AC. Since AD = AC, A lies on the perpendicular bisector of seg DC.

  6. 6. For BC = 6 cm and ∠B = 40°, which given sum AB + AC makes the construction impossible?

    1. 6.5 cm
    2. 9 cm
    3. 11 cm
    4. 5.5 cm
    Show answer

    Answer: D. AB + AC must be greater than BC = 6 cm. 5.5 cm is not, so no triangle can be drawn.

  7. 7. Given BC = 7.2 cm, ∠B = 45° and AB − AC = 2.7 cm, where is D placed?

    1. On ray BA, with BD = 2.7 cm
    2. On the opposite ray of BA, with BD = 2.7 cm
    3. On ray CB, with CD = 2.7 cm
    4. On ray BA, with BD = 9.9 cm
    Show answer

    Answer: A. AB − AC is positive, so AB (the side at ∠B) is longer: case 1. D goes on ray BA with BD = 2.7 cm.

  8. 8. In case 1 of Construction II, BD = AB − AC. Which statement correctly shows AD = AC?

    1. AD = AB + BD = AC
    2. AD = AB − BD = AB − (AB − AC) = AC
    3. AD = BC − BD
    4. AD = BD + DC
    Show answer

    Answer: B. D lies between B and A, so AD = AB − BD. Substituting BD = AB − AC gives AD = AC.

  9. 9. Given BC = 6 cm, ∠B = 100° and AC − AB = 2.5 cm, which step is correct?

    1. Mark D on ray BA with BD = 2.5 cm
    2. Mark D on seg BC with BD = 2.5 cm
    3. Mark D on the opposite ray of ray BA with BD = 2.5 cm
    4. Draw PQ = 8.5 cm
    Show answer

    Answer: C. AB, the side at ∠B, is the shorter side (AC − AB > 0), so this is case 2: D goes on the opposite ray with BD = 2.5 cm.

  10. 10. Given YZ, ∠Z and XY − XZ = 1.5 cm, which case of Construction II applies, working from Z?

    1. Case 1, D on ray ZX
    2. Construction I
    3. Construction III
    4. Case 2, D on the opposite ray of ray ZX
    Show answer

    Answer: D. The side at ∠Z is XZ, and it comes second in XY − XZ, so it is the shorter side. That is case 2: D goes on the opposite ray of ray ZX with ZD = 1.5 cm.

  11. 11. For a triangle with base 5 cm, what is true about the difference of the other two sides?

    1. It must be less than 5 cm
    2. It must be more than 5 cm
    3. It must equal 5 cm
    4. It can be any length
    Show answer

    Answer: A. By the triangle inequality, the difference of two sides of a triangle is less than the third side, here 5 cm.

  12. 12. In Construction III with ∠B = 64° and ∠C = 72°, what is ∠PAQ in △APQ?

    1. 136°
    2. 68°
    3. 112°
    4. 44°
    Show answer

    Answer: C. The angles at P and Q are 32° and 36°. So ∠PAQ = 180° − 32° − 36° = 112°.

  13. 13. In Construction III, why does C lie on the perpendicular bisector of seg AQ?

    1. Because CQ = CA
    2. Because C is the midpoint of PQ
    3. Because ∠C = 90°
    4. Because AQ is parallel to BC
    Show answer

    Answer: A. Q is placed so that CQ = AC. C is equidistant from A and Q, so it lies on the perpendicular bisector of seg AQ.

  14. 14. The perimeter of a triangle is 15.6 cm and the sides are in the ratio 3 : 4 : 5. What is the shortest side?

    1. 2.6 cm
    2. 5.2 cm
    3. 3.9 cm
    4. 6.5 cm
    Show answer

    Answer: C. 3 + 4 + 5 = 12 parts, one part = 15.6 ÷ 12 = 1.3 cm. The shortest side = 3 × 1.3 = 3.9 cm (the others are 5.2 cm and 6.5 cm).

  15. 15. Which given information calls for drawing a segment equal to the perimeter first?

    1. Base, ∠B and AB + AC
    2. Perimeter, ∠B and ∠C
    3. Base, ∠B and AB − AC
    4. Two sides and the included angle
    Show answer

    Answer: B. Construction III (perimeter and the two base angles) starts by drawing PQ equal to the perimeter and using half the base angles at P and Q.

Questions 1-2: lesson 1 (tools and planning). Questions 3-6: lesson 2 (Construction I). Questions 7-8 and 11: lesson 3 (Construction II, case 1). Questions 9-10: lesson 4 (Construction II, case 2). Questions 12-15: lesson 5 (Construction III and ratio of sides).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery