• Practice
  • About 14 min
  • 5 practice questions

Capacitor networks: charge, voltage and energy sharing

Solve series and parallel capacitor problems by tracking charge, voltage and energy, including joining charged capacitors and inserting a dielectric.

If something looks wrong, please tell us.

Most capacitor questions in competitive exams are not about a single capacitor. They ask how charge and voltage are shared in a network, what happens when two charged capacitors are joined, or how energy changes when a dielectric slab is inserted. All the numbers below are made up for practice.

Two rules decide everything

In a series chain the same charge Q sits on every capacitor, because charge can only move along the single path. The supply voltage is shared, and the smaller capacitor takes the larger share since V = Q/C. In a parallel group the same voltage V acts across every capacitor, so each stores a charge Q = CV in proportion to its own capacitance. The equivalent capacitance is C = C1 + C2 in parallel and 1/C = 1/C1 + 1/C2 in series. For two capacitors in series, the shortcut is product over sum.

Series and parallel compared
PropertySeriesParallel
ChargeSame on eachShared in ratio of C
VoltageShared in inverse ratio of CSame across each
Equivalent CSmaller than the smallestLarger than the largest
Energy storedLarger on the smaller CLarger on the larger C

Worked example 1: series and parallel

A 2 μF and a 3 μF capacitor are connected across a 10 V supply. In series: C = (2 × 3)/(2 + 3) = 1.2 μF, so Q = CV = 1.2 × 10 = 12 μC on each. Then V1 = 12/2 = 6 V and V2 = 12/3 = 4 V, and 6 + 4 = 10 V as it should. In parallel: the charges are Q1 = 2 × 10 = 20 μC and Q2 = 3 × 10 = 30 μC, so the total is 50 μC, which equals (2 + 3) × 10. The energy stored is U = ½CV² = ½ × 5 × 10⁻⁶ × 100 = 2.5 × 10⁻⁴ J.

Joining charged capacitors

When two capacitors are joined plate to plate (positive to positive), charge flows until both have the same voltage. Total charge is conserved, so the common voltage is V = (Q1 + Q2)/(C1 + C2). Energy is not conserved in the capacitors, because some is lost as heat and as a spark in the connecting wires, even if the wires have no resistance.

Worked example 2: sharing charge

A 4 μF capacitor is charged to 100 V and then joined to an uncharged 4 μF capacitor. Initial charge = 4 × 100 = 400 μC. Common voltage = 400/(4 + 4) = 50 V. Energy before = ½ × 4 × 10⁻⁶ × 100² = 0.02 J. Energy after = ½ × 8 × 10⁻⁶ × 50² = 0.01 J. Exactly half the energy is lost, and it cannot be found by keeping the energy equal, so always use charge conservation first.

Inserting a dielectric

A dielectric slab of constant K fills the gap and multiplies the capacitance by K. What else changes depends on whether the battery stays connected. Think of one fixed quantity: the battery fixes V, while an isolated capacitor fixes Q.

Dielectric of constant K inserted
QuantityBattery connected (V fixed)Battery removed (Q fixed)
CapacitanceK timesK times
ChargeK timesSame
VoltageSame1/K times
EnergyK times1/K times

Worked example 3: dielectric

A 5 μF capacitor charged to 20 V has U = ½ × 5 × 10⁻⁶ × 400 = 1 × 10⁻³ J. A slab with K = 4 is inserted after the battery is disconnected. Q is unchanged, C becomes 20 μF, V becomes 20/4 = 5 V, and U = ½ × 20 × 10⁻⁶ × 25 = 2.5 × 10⁻⁴ J, which is one quarter of the original. The missing energy went into pulling the slab in.

Series: same Q, voltages divide inversely to C. Parallel: same V, charges divide in proportion to C. Joined capacitors share charge, not energy.

— Rule to remember

Key takeaways

  • Find the equivalent capacitance first, then the charge, then work back to each capacitor.
  • In series the smaller capacitor carries the larger voltage.
  • After joining charged capacitors use V = (Q1 + Q2)/(C1 + C2).
  • With a dielectric, ask first: battery connected or removed?

Check your understanding

  1. 1. Three capacitors of 6 μF each are joined in series. The equivalent capacitance is:

    1. 18 μF
    2. 6 μF
    3. 2 μF
    4. 9 μF
    Show answer

    Answer: C. For equal capacitors in series, C = 6/3 = 2 μF. 18 μF would be the parallel value.

  2. 2. A 3 μF and a 6 μF capacitor in series are connected across 9 V. The voltage across the 3 μF capacitor is:

    1. 3 V
    2. 4.5 V
    3. 9 V
    4. 6 V
    Show answer

    Answer: D. C = (3 × 6)/9 = 2 μF, so Q = 2 × 9 = 18 μC on each. V across 3 μF = 18/3 = 6 V; across 6 μF it is 3 V.

  3. 3. A 2 μF capacitor charged to 50 V is joined to an uncharged 3 μF capacitor. The common voltage is:

    1. 20 V
    2. 25 V
    3. 10 V
    4. 30 V
    Show answer

    Answer: A. Charge = 2 × 50 = 100 μC. Common voltage = 100/(2 + 3) = 20 V.

  4. 4. The energy stored in a 10 μF capacitor charged to 20 V is:

    1. 2 × 10⁻² J
    2. 4 × 10⁻³ J
    3. 2 × 10⁻³ J
    4. 1 × 10⁻³ J
    Show answer

    Answer: C. U = ½CV² = ½ × 10 × 10⁻⁶ × 400 = 2 × 10⁻³ J.

  5. 5. A capacitor stays connected to a battery and a slab with K = 3 fills the gap. The charge on it becomes:

    1. three times larger
    2. three times smaller
    3. the same as before
    4. nine times larger
    Show answer

    Answer: A. V is fixed by the battery and C becomes 3 times larger, so Q = CV becomes 3 times larger.

Privacy · Terms · Refunds · Delivery