- Practice
- 15 practice questions
Final self-assessment: Electricity practice
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on electricity practice first, then check your answers and read each explanation. The questions follow the lessons in order - questions 1-3: lesson 1 (Electric charge, Coulomb's law and electric field), questions 4-6: lesson 2 (Potential, potential difference and capacitors), questions 7-9: lesson 3 (Current, Ohm's law and resistance), questions 10-12: lesson 4 (Circuits, EMF and Kirchhoff's rules), questions 13-15: lesson 5 (Heating effect of current and electrical power). Revisit the lesson for any question you missed.
Final self-assessment
-
1. Two point charges are each doubled and the distance between them is also doubled. What happens to the force between them?
- It doubles
- It becomes four times
- It stays the same
- It halves
Show answer
Answer: C. F = kq₁q₂/r². The product q₁q₂ becomes 4 times and r² becomes 4 times, so F is unchanged.
-
2. A charge of 2 μC placed at a point feels a force of 0.01 N. What is the electric field at that point?
- 2 × 10⁻⁸ N/C
- 200 N/C
- 5 × 10⁻³ N/C
- 5000 N/C
Show answer
Answer: D. E = F/q = 0.01 ÷ 2 × 10⁻⁶ = 5000 N/C.
-
3. Two charges of 3 μC each are 0.3 m apart. What is the force between them? (k = 9 × 10⁹ N m²/C²)
- 0.9 N, repulsive
- 0.9 N, attractive
- 0.27 N, repulsive
- 2.7 N, repulsive
Show answer
Answer: A. F = 9 × 10⁹ × (3 × 10⁻⁶)² ÷ 0.09 = 9 × 10⁹ × 9 × 10⁻¹² ÷ 0.09 = 0.081 ÷ 0.09 = 0.9 N. Like charges repel.
-
4. Two 6 μF capacitors are connected in parallel, and this pair is connected in series with a third 6 μF capacitor. What is the equivalent capacitance?
- 4 μF
- 18 μF
- 9 μF
- 2 μF
Show answer
Answer: A. The parallel pair gives 12 μF. In series with 6 μF: C = 12 × 6 ÷ (12 + 6) = 72 ÷ 18 = 4 μF.
-
5. A 2 μF capacitor stores 0.01 J when charged to 100 V. How much energy does it store when charged to 200 V?
- 0.04 J
- 0.02 J
- 0.01 J
- 0.08 J
Show answer
Answer: A. U = ½CV² goes as V². Doubling V gives 4 × 0.01 = 0.04 J. Check: ½ × 2 × 10⁻⁶ × 40 000 = 0.04 J.
-
6. A parallel-plate capacitor has a capacitance of 10 μF. Its plate separation is halved, with nothing else changed. What is its new capacitance?
- 5 μF
- 10 μF
- 20 μF
- 40 μF
Show answer
Answer: C. C = ε₀A/d, so C is inversely proportional to d. Halving d doubles C to 20 μF.
-
7. A 4 Ω wire is stretched to twice its length. It is then cut into two equal pieces, which are joined in parallel. What is the resultant resistance?
- 8 Ω
- 4 Ω
- 16 Ω
- 2 Ω
Show answer
Answer: B. Stretching to twice the length gives 2² × 4 = 16 Ω. Each half is 8 Ω; two 8 Ω in parallel give 4 Ω.
-
8. Resistors of 12 Ω and 4 Ω are in parallel across a 6 V supply. What current flows through the 4 Ω resistor?
- 1.5 A
- 0.5 A
- 2 A
- 0.375 A
Show answer
Answer: A. In parallel each resistor has the full 6 V. I = 6 ÷ 4 = 1.5 A (and 0.5 A in the 12 Ω, 2 A in all).
-
9. A wire is replaced by one of the same material with twice the length and half the diameter. By what factor does the resistance change?
- 4 times
- 2 times
- 16 times
- 8 times
Show answer
Answer: D. Twice the length doubles R. Half the diameter makes the area one quarter, which multiplies R by 4. Total: 2 × 4 = 8 times.
-
10. A cell of EMF 12 V and internal resistance 0.5 Ω is connected to a 5.5 Ω resistor. What is the terminal voltage?
- 12 V
- 1 V
- 11 V
- 10 V
Show answer
Answer: C. I = 12 ÷ (5.5 + 0.5) = 2 A. V = E − Ir = 12 − 2 × 0.5 = 11 V.
-
11. A 12 V battery (no internal resistance) drives a 2 Ω resistor in series with a parallel pair of 3 Ω and 6 Ω. What current flows through the 6 Ω resistor?
- 2 A
- 3 A
- 0.5 A
- 1 A
Show answer
Answer: D. Parallel pair: 3 × 6 ÷ 9 = 2 Ω. Total = 4 Ω, so I = 12 ÷ 4 = 3 A. Voltage across the pair = 3 × 2 = 6 V. Current in 6 Ω = 6 ÷ 6 = 1 A (and 2 A in the 3 Ω).
-
12. A Wheatstone bridge has P = 2 Ω, Q = 3 Ω and R = 4 Ω, and the galvanometer shows no current. What is S?
- 2.67 Ω
- 6 Ω
- 1.5 Ω
- 8 Ω
Show answer
Answer: B. No galvanometer current means the bridge is balanced: P/Q = R/S, so S = R × Q/P = 4 × 3 ÷ 2 = 6 Ω.
-
13. A 1000 W kettle heats 1 kg of water from 25 °C to 100 °C. Ignoring losses, how long does it take? (specific heat of water = 4200 J/kg °C)
- 420 s
- 315 s
- 75 s
- 3150 s
Show answer
Answer: B. Heat needed = 1 × 4200 × 75 = 315 000 J. Time = energy ÷ power = 315 000 ÷ 1000 = 315 s.
-
14. Bulbs rated 40 W and 100 W (both 220 V) are connected in series across 220 V. What is the ratio of the power used by the 40 W bulb to that used by the 100 W bulb?
- 2 : 5
- 5 : 2
- 1 : 1
- 25 : 4
Show answer
Answer: B. R = V²/P, so R₄₀ : R₁₀₀ = 100 : 40 = 5 : 2. In series the current is the same and P = I²R, so the powers are in the ratio 5 : 2: the 40 W bulb glows brighter.
-
15. A 2 kW heater is used for 90 minutes a day for 30 days. At an assumed rate of Rs 5 per unit, what does this cost?
- Rs 300
- Rs 900
- Rs 450
- Rs 45
Show answer
Answer: C. Energy = 2 kW × 1.5 h × 30 = 90 kWh. Cost = 90 × 5 = Rs 450.
Sign in to keep track of the lessons you finish.