- Foundation
- About 14 min
- 5 practice questions
Electromagnetic induction and the generator
Explain Faraday's discovery that a changing magnetic field induces current, Lenz's law, and how a generator works.
If something looks wrong, please tell us.
Michael Faraday asked the reverse question: if current makes magnetism, can magnetism make current? The answer is yes, and it gave us electricity generation.
Electromagnetic induction
When the magnetic field through a coil changes, an emf (voltage) is induced in the coil. If the circuit is closed, a current flows. For example, pushing a bar magnet into a coil connected to a galvanometer makes the needle deflect, but only while the magnet moves. Pulling it out deflects the needle the opposite way. Moving the magnet faster or using more turns gives a bigger effect.
Lenz's law: the direction of the induced current is such that it opposes the change that produced it. This follows from the conservation of energy.
The AC generator
A coil is rotated between the poles of a strong magnet. The magnetic field through it keeps changing, so an emf is induced. The direction of the current reverses every half turn, so it is an alternating current (AC). Slip rings carry the current out. A generator converts mechanical energy into electrical energy. In India the AC supply has a frequency of 50 Hz.
Worked examples
Example 1. A magnet is held at rest inside a coil. The galvanometer shows zero deflection, because the field through the coil is not changing.
Example 2. An AC supply of 50 Hz changes direction twice in each cycle. Number of reversals per second = 2 × 50 = 100.
Example 3. The time period of a 50 Hz AC supply: T = 1 ÷ 50 = 0.02 s.
Example 4. A bicycle dynamo lights a lamp when the wheel turns. The turning magnet induces an emf in the coil. It stops when the wheel stops.
A changing magnetic field induces an emf. Lenz's law: induced current opposes the change. Generator: mechanical to electrical energy.
Key takeaways
- A changing field through a coil induces an emf.
- Lenz's law: the induced current opposes the cause.
- A generator uses induction to produce AC.
Check your understanding
-
1. A bar magnet is pushed into a coil connected to a galvanometer. When does the needle deflect?
- All the time the magnet stays inside the coil
- Only when the magnet is held at rest
- Never, as there is no battery
- Only while the magnet is moving
Show answer
Answer: D. An emf is induced only while the magnetic field through the coil is changing, that is, while the magnet moves.
-
2. The magnet is now pulled out of the coil. What does the galvanometer needle do?
- It deflects the same way as before
- It deflects the opposite way
- It does not move at all
- It always deflects twice as far
Show answer
Answer: B. Pulling the magnet out changes the field through the coil in the opposite sense, so the induced current flows the other way.
-
3. Which change gives a larger induced current when a magnet is moved into a coil?
- Moving the magnet faster
- Holding the magnet still inside the coil
- Using a coil with fewer turns
- Moving the magnet more slowly
Show answer
Answer: A. A faster change of the field, or more turns, gives a bigger induced emf. A still magnet induces nothing.
-
4. What is the time period of an AC supply of frequency 50 Hz?
- 0.05 s
- 0.2 s
- 50 s
- 0.02 s
Show answer
Answer: D. T = 1 ÷ f = 1 ÷ 50 Hz = 0.02 s.
-
5. What does Lenz's law say about an induced current?
- It flows in the direction that helps the change producing it
- It always flows clockwise
- It flows in the direction that opposes the change producing it
- It flows only in a closed iron core
Show answer
Answer: C. Lenz's law: the induced current opposes the change that caused it. This follows from the conservation of energy.
Sign in to keep track of the lessons you finish.