- Foundation
- About 13 min
- 5 practice questions
Making and losing magnetism: magnetic materials and keepers
Know how a steel bar is magnetised and demagnetised, why soft iron and steel are used for different jobs and how to test whether a bar is really a magnet.
If something looks wrong, please tell us.
Not every piece of iron is a magnet, and a magnet does not stay a magnet for ever if it is treated badly. This lesson explains how a magnet is made, how it can be spoiled, and why different magnetic materials are chosen for different jobs.
Magnetic and non-magnetic materials
Iron, steel, nickel and cobalt are ferromagnetic: they are strongly attracted by a magnet and can themselves be magnetised. Materials such as copper, aluminium, wood, glass and plastic are not attracted in everyday experience. Inside a ferromagnetic material there are tiny regions called domains, each a very small magnet. In an unmagnetised piece the domains point in random directions and cancel. When the piece is magnetised, most domains line up the same way.
Ways of making a magnet
- Single touch: stroke a steel bar many times in the same direction with one pole of a strong magnet, lifting the magnet well away for each return stroke. The end of the bar where each stroke finishes gets the pole opposite to the stroking pole.
- Electrical method: place the steel bar inside a solenoid and pass a direct current through it for a short time. The bar becomes a magnet, and the clock rule gives its poles. This is the best method and makes a strong magnet.
Ways of losing magnetism
- Heating a magnet to a high temperature (above the Curie temperature) destroys the alignment of domains.
- Hammering or dropping it knocks the domains out of line.
- Alternating current passed through a solenoid around it, slowly reducing the current to zero, demagnetises it.
- Poor storage: magnets kept with like poles together, or without keepers, slowly weaken.
To store a pair of bar magnets, place them side by side with unlike poles next to each other and put a small bar of soft iron (a keeper) across each end. The keepers complete a closed path for the field lines and stop the magnets from weakening.
Soft iron and steel
Soft iron is magnetised easily and loses its magnetism easily when the current is switched off. It is used for electromagnets, relays and transformer cores. Steel is hard to magnetise, but keeps its magnetism for a long time, so it is used for permanent magnets and compass needles.
Worked example 1: poles by stroking
A steel needle is stroked from its left end to its right end with the north pole of a magnet. The magnet is lifted away on the return. Each stroke finishes at the right end, so the right end acquires the pole opposite to the stroking pole, a south pole. The left end becomes a north pole.
Worked example 2: poles by a solenoid
A steel bar is placed in a solenoid. Looking from the left end, the current goes clockwise. By the clock rule, the left end is a south pole and the right end, where the current appears anticlockwise, is a north pole. If the current is reversed, the poles interchange.
Worked example 3: is it a magnet?
A bar X is attracted by one end of a magnet. Is X a magnet? Not necessarily: a magnet attracts both a magnet's unlike pole and unmagnetised iron. A bar Y is repelled by the north pole of a magnet. Y must be a magnet, because only a magnet can repel. Repulsion is the only sure test.
Only repulsion proves a bar is a magnet. Soft iron: electromagnets. Steel: permanent magnets. Heating, hammering and AC demagnetise.
Key takeaways
Magnets are made by stroking or, better, by a current in a solenoid. They are spoiled by heat, rough treatment and poor storage. Choose soft iron where magnetism must come and go, and steel where it must stay.
Check your understanding
-
1. A material that is strongly attracted by a magnet and can be magnetised is called:
- diamagnetic
- non-magnetic
- ferromagnetic
- insulating
Show answer
Answer: C. Iron, nickel and cobalt are ferromagnetic; they are strongly attracted and can be magnetised.
-
2. Which material is the best choice for the core of an electromagnet?
- soft iron
- hard steel
- plastic
- copper
Show answer
Answer: A. Soft iron is magnetised and demagnetised easily, which is exactly what an electromagnet needs.
-
3. A bar is repelled when it is brought near the north pole of a magnet. We can conclude that the bar is:
- an unmagnetised piece of iron
- a magnet with its north pole nearest
- a magnet with its south pole nearest
- a piece of copper
Show answer
Answer: B. Only a magnet can repel another magnet, and like poles repel: the end nearest is a north pole.
-
4. Which of the following will weaken a permanent magnet?
- storing it with a soft iron keeper
- hammering it repeatedly
- placing it on a wooden table
- keeping it away from heat
Show answer
Answer: B. Hammering knocks the domains out of alignment and weakens the magnet.
-
5. A steel bar placed in a solenoid has a clockwise current as seen from its left end. The left end becomes a:
- south pole
- north pole
- neutral end
- pole that changes sign
Show answer
Answer: A. A clockwise current as seen from an end makes that end a south pole by the clock rule.
Sign in to keep track of the lessons you finish.