- Foundation
- About 13 min
- 5 practice questions
Magnetic effect of electric current
See how a current-carrying wire produces a magnetic field, use the right-hand rule, and understand solenoids and electromagnets.
If something looks wrong, please tell us.
In 1820, Hans Christian Oersted noticed that a compass needle moved when placed near a wire carrying a current. Electricity and magnetism turned out to be linked. This discovery led to electromagnets, electric bells, motors and much more.
Field around a straight wire
A straight current-carrying wire has circular magnetic field lines around it. The right-hand thumb rule gives the direction: imagine holding the wire in your right hand with the thumb pointing in the direction of the current; your fingers curl in the direction of the field. The field gets stronger with larger current and weaker with distance from the wire.
Solenoid and electromagnet
A solenoid is a long coil of wire. When current flows, it behaves like a bar magnet: the field inside is strong and uniform and straight. Placing a soft iron core inside makes an electromagnet. Its strength can be increased by increasing the current, the number of turns, or by using a soft iron core. It can be switched on and off, which is its great advantage over a permanent magnet.
Uses: electric bells, cranes lifting scrap iron, relays, MRI machines, loudspeakers.
Worked examples
Example 1. Current flows upward in a vertical wire. Using the right-hand rule with the thumb up, the fingers curl anticlockwise when seen from above.
Example 2. A student winds 50 turns on a nail and connects it to a cell. It picks up 3 pins. She then winds 100 turns with the same cell. It picks up more pins, since more turns give a stronger field.
Example 3. When the current in a solenoid is reversed, its north and south poles swap.
Current produces a magnetic field. Strength of an electromagnet rises with current, number of turns and a soft iron core.
Key takeaways
- A current produces a magnetic field.
- Right-hand thumb rule gives the field direction.
- An electromagnet is a solenoid with a soft iron core.
Check your understanding
-
1. Who first noticed that a compass needle moves when placed near a wire carrying a current?
- Hans Christian Oersted
- Michael Faraday
- Georg Ohm
- John Ambrose Fleming
Show answer
Answer: A. In 1820 Oersted saw a compass needle deflect near a current-carrying wire, showing that a current produces a magnetic field.
-
2. A vertical wire carries a current downwards. Seen from above, the magnetic field lines around it are:
- Circles running anticlockwise
- Straight lines pointing away from the wire
- Absent, as a vertical wire has no field
- Circles running clockwise
Show answer
Answer: D. Right-hand thumb rule: point the thumb down along the current; seen from above, the fingers curl clockwise. (With the current upwards they curl anticlockwise.)
-
3. Which change would NOT make an electromagnet stronger?
- Increasing the current
- Replacing its soft iron core with a wooden rod
- Increasing the number of turns
- Putting a soft iron core inside the coil
Show answer
Answer: B. The strength rises with the current, the number of turns and a soft iron core. Removing the iron core weakens it.
-
4. What is the main advantage of an electromagnet over a permanent magnet?
- It works without any current
- It has only one pole
- It attracts copper and plastic
- It can be switched on and off
Show answer
Answer: D. An electromagnet is magnetic only while current flows, so it can be switched on and off. That is why it is used in cranes, bells and relays.
-
5. The current through a solenoid is reversed. What happens to its poles?
- The magnetic field disappears completely
- The north and south poles swap
- The field becomes twice as strong
- It becomes a permanent magnet
Show answer
Answer: B. A solenoid behaves like a bar magnet. Reversing the current reverses the field, so its north and south poles interchange.
Sign in to keep track of the lessons you finish.