- Foundation
- About 14 min
- 5 practice questions
Force on a current-carrying conductor and the motor
Use Fleming's left-hand rule and F = BIL, and explain how a simple DC motor works.
If something looks wrong, please tell us.
If a current produces a magnetic field, then a current-carrying wire placed in another magnetic field must feel a force. This force is what turns the motor in every fan, mixer and electric car.
Force on a wire
A wire of length L carrying current I in a magnetic field B, at right angles to the field, experiences a force F = B I L. B is the magnetic field strength (flux density), measured in tesla (T). The force is greatest when the wire is perpendicular to the field and zero when it is parallel to it.
Fleming's left-hand rule: stretch the forefinger, middle finger and thumb of the left hand at right angles to each other. If the forefinger points along the field and the middle finger along the current, then the thumb gives the direction of the force (motion).
The electric motor
A DC motor converts electrical energy into mechanical energy. A rectangular coil sits between the poles of a magnet. Current flows in opposite directions in its two long sides, so the forces on them are opposite, and the coil turns. A split-ring commutator reverses the current every half turn so that the coil keeps rotating in the same direction.
Worked examples
Example 1. A wire 0.2 m long carries 4 A in a field of 0.5 T at right angles. F = BIL = 0.5 × 4 × 0.2 = 0.4 N.
Example 2. If the same wire is placed parallel to the field, the force is zero.
Example 3. To double the force on the wire in Example 1, double the current to 8 A: F = 0.5 × 8 × 0.2 = 0.8 N.
F = BIL (wire perpendicular to field). Fleming's left-hand rule: Field, Current, Thrust. Motor: electrical to mechanical energy.
Key takeaways
- F = BIL for a wire perpendicular to the field.
- Fleming's left-hand rule gives the direction of the force.
- A motor turns electrical energy into motion.
Check your understanding
-
1. A wire 0.5 m long carries a current of 3 A at right angles to a magnetic field of 0.4 T. What is the force on it?
- 0.3 N
- 1.2 N
- 0.6 N
- 6 N
Show answer
Answer: C. F = B I L = 0.4 T × 3 A × 0.5 m = 0.6 N.
-
2. When is the force on a current-carrying wire in a magnetic field zero?
- When the wire is parallel to the field
- When the wire is perpendicular to the field
- When the current is doubled
- When the wire is made shorter
Show answer
Answer: A. The force is greatest when the wire is perpendicular to the field and zero when the wire lies parallel to it.
-
3. In Fleming's left-hand rule, the forefinger points along the field and the middle finger along the current. What does the thumb give?
- The direction of the force (motion) on the conductor
- The direction of the magnetic field
- The direction of the current
- The size of the induced emf
Show answer
Answer: A. Field - forefinger, Current - middle finger, Thrust (force) - thumb.
-
4. What does the split-ring commutator do in a DC motor?
- It makes the magnetic field stronger
- It changes the mains AC into DC
- It reverses the current in the coil every half turn so the coil keeps turning the same way
- It stores energy for when the supply fails
Show answer
Answer: C. Every half turn the commutator reverses the current in the coil, so the forces keep turning it in the same direction.
-
5. A wire in a 0.25 T field carries 2 A over 0.8 m at right angles to the field. If the current is doubled and the length in the field is halved, what is the new force?
- 0.8 N
- 0.4 N
- 0.2 N
- 1.6 N
Show answer
Answer: B. Original F = 0.25 × 2 × 0.8 = 0.4 N. New F = 0.25 T × 4 A × 0.4 m = 0.4 N: doubling I and halving L leave the force unchanged.
Sign in to keep track of the lessons you finish.