Revision notes

Magnetism: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Magnets, poles and magnetic field lines

Like poles repel, unlike poles attract. Field lines go from N to S outside the magnet and never cross.

— Remember
  • Like poles repel; unlike attract.
  • Field lines run from N to S outside the magnet.
  • Magnetic poles always occur in pairs.
Read the full lesson

Lesson 2

Magnetic effect of electric current

Current produces a magnetic field. Strength of an electromagnet rises with current, number of turns and a soft iron core.

— Remember
  • A current produces a magnetic field.
  • Right-hand thumb rule gives the field direction.
  • An electromagnet is a solenoid with a soft iron core.
Read the full lesson

Lesson 3

Force on a current-carrying conductor and the motor

F = BIL (wire perpendicular to field). Fleming's left-hand rule: Field, Current, Thrust. Motor: electrical to mechanical energy.

— Remember
  • F = BIL for a wire perpendicular to the field.
  • Fleming's left-hand rule gives the direction of the force.
  • A motor turns electrical energy into motion.
Read the full lesson

Lesson 4

Electromagnetic induction and the generator

A changing magnetic field induces an emf. Lenz's law: induced current opposes the change. Generator: mechanical to electrical energy.

— Remember
  • A changing field through a coil induces an emf.
  • Lenz's law: the induced current opposes the cause.
  • A generator uses induction to produce AC.
Read the full lesson

Lesson 5

Transformers and the Earth's magnetism

Vs/Vp = Ns/Np. Step-up: Ns > Np. Ideal: power in = power out. Works on AC only.

— Remember
  • Transformers change AC voltage using induction.
  • Step-up raises voltage and lowers current; step-down does the opposite.
  • The Earth is a giant magnet.
Read the full lesson

Lesson 6

How strong is the field? Straight wire, circular coil and solenoid

Wire: B = μ₀I/2πr. Solenoid: B = μ₀nI, with n = turns per metre. μ₀ = 4π × 10⁻⁷ T m/A. Anticlockwise end = north pole, clockwise end = south pole.

— Rules to remember

A stronger current, more turns per metre and a soft iron core all strengthen an electromagnet. A straight wire's field falls with distance, whereas a solenoid gives a strong, uniform field inside it.

Read the full lesson

Lesson 7

Making and losing magnetism: magnetic materials and keepers

Only repulsion proves a bar is a magnet. Soft iron: electromagnets. Steel: permanent magnets. Heating, hammering and AC demagnetise.

— Rule to remember

Magnets are made by stroking or, better, by a current in a solenoid. They are spoiled by heat, rough treatment and poor storage. Choose soft iron where magnetism must come and go, and steel where it must stay.

Read the full lesson

Lesson 8

Direction rules in practice: left-hand rule, right-hand rule and Lenz's law

Direction rules
RuleUse it to findHow
Right-hand thumb ruleDirection of the field around a wireThumb along the current; fingers curl along the field
Clock rulePoles of a coil or solenoidAnticlockwise end is north; clockwise end is south
Fleming's left-hand ruleDirection of force on a current in a field (motor)Forefinger: field; middle finger: current; thumb: force
Fleming's right-hand ruleDirection of induced current (generator)Forefinger: field; thumb: motion; middle finger: current
Lenz's lawDirection of an induced currentThe effect opposes the change that causes it

Same-direction currents attract; opposite-direction currents repel. Lenz: the induced current opposes the change in flux. Motor: left hand. Generator: right hand.

— Rules to remember

Choose the rule that matches the situation, hold the fingers in the right order (field, current, force) and check the answer against Lenz's law whenever induction is involved.

Read the full lesson

Lesson 9

Alternating current, transmission and safety in home wiring

V_rms = V₀/√2. Loss in line = I²R. Fuse and switch go in the live wire; earth wire is connected to the metal body. 1 kWh = 3.6 × 10⁶ J.

— Rules to remember

Quote AC in r.m.s. values, send power at high voltage to cut I²R loss, and protect every circuit with a fuse in the live wire and an earth connection to the metal body.

Read the full lesson

Privacy · Terms · Refunds · Delivery