Revision notes

Pressure: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Pressure and its units

P = F/A. 1 atm = 1.013 × 10⁵ Pa = 760 mm Hg. Pressure is inversely proportional to area for a given force.

— Remember
  • P = F/A; the unit is the pascal (N/m²).
  • Smaller area means greater pressure for the same force.
  • Convert cm² to m² (1 cm² = 10⁻⁴ m²) before substituting.
Read the full lesson

Lesson 2

Pressure in liquids

Gauge pressure = hρg. Absolute pressure = P_atm + hρg. Pressure depends on depth, not on the shape or the width of the vessel.

— Remember
  • P = hρg increases linearly with depth.
  • Add the atmospheric pressure for absolute pressure.
  • Shape and width of the container do not matter.
Read the full lesson

Lesson 3

Pascal's law and hydraulic machines

F₁/A₁ = F₂/A₂. Force gain = area ratio, but distance moved is reduced by the same ratio, so work in = work out.

— Remember
  • Pressure is equal at both pistons; forces differ in proportion to area.
  • Hydraulic machines multiply force, not energy.
  • A smaller piston must move farther than the larger one.
Read the full lesson

Lesson 4

Buoyancy and Archimedes' principle

Upthrust = weight of fluid displaced = Vρg. Floating: upthrust = weight. Fraction submerged = ρ_body/ρ_fluid. Relative density = weight in air / loss of weight in water.

— Remember
  • Upthrust depends on the volume submerged and the fluid's density, not the body's weight.
  • A floating body displaces its own weight of fluid.
  • Apparent weight = true weight − upthrust.
Read the full lesson

Lesson 5

Atmospheric pressure, manometers and Bernoulli's principle

A₁v₁ = A₂v₂. P + ½ρv² + ρgh = constant. Torricelli: v = √(2gh). 1 atm = 76 cm Hg = 1.013 × 10⁵ Pa.

— Remember
  • Atmospheric pressure supports a 76 cm mercury column at sea level.
  • Narrower pipe means faster flow and lower pressure in a horizontal pipe.
  • Torricelli's speed v = √(2gh) is the free-fall speed from the surface level to the hole.
Read the full lesson

Lesson 6

Pressure on solids: contact area, stacked blocks and the traps

Uniform solid standing on its base: P = ρgh, independent of base area. Otherwise P = (total weight above) ÷ (area of contact).

— Rule to remember
  • The same weight on a smaller area gives a greater pressure; compare faces by their areas.
  • For a uniform column, P = ρgh; the area drops out.
  • Choose the force and the area for the same contact surface.
  • Always convert to m² before using P = F/A.
Read the full lesson

Lesson 7

Liquid pressure problems: layers, U-tubes and thrust on a wall

Gauge pressure under layers = Σ hρg. U-tube: h₁ρ₁ = h₂ρ₂ from the common level. Wall thrust = ½ρgH² × width.

— Rule to remember
  • Add the layers; each uses its own density.
  • In a U-tube the denser liquid has the shorter column.
  • Thrust on a wall depends on the square of the depth.
Read the full lesson

Lesson 8

Buoyancy problems: fraction submerged, loads and two-liquid weighing

Floating: upthrust = weight; submerged fraction = ρ_body ÷ ρ_liquid. Weighed in two liquids: loss₁ ÷ loss₂ = ρ₁ ÷ ρ₂.

— Rule to remember
  • Fraction submerged equals the density ratio.
  • Extra load to sink a floater = full upthrust − weight.
  • Losses of weight in two liquids are in the ratio of the liquid densities.
Read the full lesson

Lesson 9

Pressure and flow: mixed problems with barometers, manometers and jets

Narrower pipe: faster flow, lower pressure. Efflux speed: √(2gh). Barometer: vertical height decides.

— Rule to remember
  • Speed varies inversely as the area, which is inversely as the square of the radius.
  • The pressure difference in a horizontal pipe equals the change in ½ρv².
  • Efflux speed depends only on the depth below the surface.
Read the full lesson

Privacy · Terms · Refunds · Delivery