• Practice
  • About 13 min
  • 5 practice questions

Pressure and its units

Define pressure as force per unit area, compare how area changes it, and convert between pascal, atmosphere and mm of mercury.

If something looks wrong, please tell us.

A sharp knife cuts better than a blunt one and a camel's wide feet do not sink in sand. Both facts come from pressure, which depends on how a force is spread over an area. Exam questions test the formula and the units, so start there.

Definition

Pressure = normal force / area of contact: P = F/A. The SI unit is the pascal (Pa), 1 Pa = 1 N/m². It is a scalar. Larger units: 1 kPa = 10³ Pa; 1 bar = 10⁵ Pa; 1 standard atmosphere (atm) = 1.013 × 10⁵ Pa = 760 mm of mercury. Dimensions: [M L⁻¹ T⁻²].

  • For the same force, a smaller area gives a larger pressure (needle, nail, knife).
  • For the same force, a larger area gives a smaller pressure (wide straps on a school bag, tractor tyres, railway sleepers).
  • Only the component of force perpendicular to the surface counts.

Worked examples (g = 10 m/s²)

Example 1. A force of 600 N acts on an area of 0.03 m². P = 600/0.03 = 20 000 Pa = 20 kPa.

Example 2. A 60 kg person stands on both feet with a total contact area of 0.04 m². Weight = 600 N. P = 600/0.04 = 15 000 Pa. On one foot (0.02 m²), the pressure doubles to 30 000 Pa.

Example 3. A woman of 50 kg stands on one stiletto heel of area 1 cm² = 10⁻⁴ m². P = 500/10⁻⁴ = 5 × 10⁶ Pa, far more than the pressure from standing on flat shoes.

Example 4. A brick of dimensions 20 cm × 10 cm × 5 cm weighs 20 N. It exerts the greatest pressure on its smallest face (10 cm × 5 cm = 0.005 m²): P = 20/0.005 = 4000 Pa; on its largest face (20 × 10 cm = 0.02 m²): P = 1000 Pa.

P = F/A. 1 atm = 1.013 × 10⁵ Pa = 760 mm Hg. Pressure is inversely proportional to area for a given force.

— Remember

Key takeaways

  • P = F/A; the unit is the pascal (N/m²).
  • Smaller area means greater pressure for the same force.
  • Convert cm² to m² (1 cm² = 10⁻⁴ m²) before substituting.

Check your understanding

  1. 1. Express a pressure of 3 bar in pascal.

    1. 3 × 10³ Pa
    2. 3 × 10⁶ Pa
    3. 3 × 10⁵ Pa
    4. 3.039 × 10⁵ Pa
    Show answer

    Answer: C. 1 bar = 10⁵ Pa, so 3 bar = 3 × 10⁵ Pa. (3.039 × 10⁵ Pa would be 3 atm.)

  2. 2. A woman of mass 40 kg stands on one heel of area 2 cm². What pressure does the heel exert? (g = 10 m/s²)

    1. 2 × 10⁶ Pa
    2. 2 × 10⁴ Pa
    3. 2 × 10² Pa
    4. 8 × 10³ Pa
    Show answer

    Answer: A. Weight = 40 × 10 = 400 N. Area = 2 cm² = 2 × 10⁻⁴ m². P = 400 ÷ (2 × 10⁻⁴) = 2 × 10⁶ Pa.

  3. 3. What are the dimensions of pressure?

    1. [M L T⁻²]
    2. [M L² T⁻²]
    3. [M L⁻³]
    4. [M L⁻¹ T⁻²]
    Show answer

    Answer: D. P = F/A = [M L T⁻²] ÷ [L²] = [M L⁻¹ T⁻²].

  4. 4. Express 1.5 atm in pascal (1 atm = 1.013 × 10⁵ Pa).

    1. 1.013 × 10⁵ Pa
    2. about 1.52 × 10⁵ Pa
    3. about 1.52 × 10⁴ Pa
    4. about 2.03 × 10⁵ Pa
    Show answer

    Answer: B. 1.5 × 1.013 × 10⁵ = 1.5195 × 10⁵ ≈ 1.52 × 10⁵ Pa.

  5. 5. A horizontal push of 50 N acts along (parallel to) the top of a table of area 2 m². What pressure does this push exert on the table top?

    1. 25 Pa
    2. 0 Pa
    3. 50 Pa
    4. 100 Pa
    Show answer

    Answer: B. Only the component of force perpendicular to the surface produces pressure. A push along the surface has no perpendicular component, so it adds no pressure.

Sign in to keep track of the lessons you finish.

Next lesson → Pressure in liquids

Privacy · Terms · Refunds · Delivery