- Practice
- About 15 min
- 5 practice questions
Buoyancy problems: fraction submerged, loads and two-liquid weighing
Solve floating-body problems using the fraction submerged, the extra load to sink a block, and weighing in two liquids to find density.
If something looks wrong, please tell us.
Buoyancy problems repeat three ideas: a floating body displaces its own weight of fluid, a submerged body is pushed up by the weight of the fluid it displaces, and weight lost in a liquid reveals its density. Master the three and most questions become routine. Use g = 10 m/s² and water density 1000 kg/m³.
Two shortcuts
- Floating body: fraction of volume submerged = ρ_body ÷ ρ_liquid. The rest of the volume is above the surface.
- Weighing: upthrust = weight in air − weight in liquid. Upthrust is proportional to the liquid density for a fully immersed body, so the ratio of the losses of weight in two liquids equals the ratio of the densities of the liquids.
Worked examples
Example 1: depth of a floating block. A rectangular wooden block 0.2 m × 0.1 m × 0.05 m has density 600 kg/m³. Volume = 0.001 m³, mass = 0.6 kg, weight = 6 N. Floating in water, upthrust = 6 N, so the submerged volume = 6 ÷ (1000 × 10) = 6 × 10⁻⁴ m³. Lying flat on its 0.2 × 0.1 = 0.02 m² face, the depth submerged = 6 × 10⁻⁴ ÷ 0.02 = 0.03 m = 3 cm. As a check, the fraction submerged is 600 ÷ 1000 = 0.6, and 0.6 × 5 cm = 3 cm.
Example 2: load needed to sink the block. If the block above is just fully submerged, the upthrust is 1000 × 10 × 0.001 = 10 N. The block weighs 6 N, so an extra load of 10 − 6 = 4 N (a mass of 0.4 kg) must be placed on it. The load rests on the top, so the block floats level with the surface.
Example 3: weighing in two liquids. An object weighs 15 N in air, 10 N in water and 11 N in an unknown liquid X. Loss in water = 5 N and loss in X = 4 N. Relative density of the object = 15 ÷ 5 = 3. Relative density of X = 4 ÷ 5 = 0.8, so its density is 800 kg/m³. Volume of the object = 5 ÷ (1000 × 10) = 5 × 10⁻⁴ m³, and as a check, the mass is 1.5 kg, giving 1.5 ÷ (5 × 10⁻⁴) = 3000 kg/m³.
Example 4: a boat in different liquids. A boat and its cargo have a total mass of 2000 kg and float in fresh water. They displace 2000 ÷ 1000 = 2 m³. In a denser liquid of density 1250 kg/m³ (an illustrative value), the displaced volume is 2000 ÷ 1250 = 1.6 m³, so the boat floats higher. The weight has not changed; only the volume needed to support it has.
Example 5: melting ice. A cube of ice floats in a glass of water. The ice displaces its own weight of water. When it melts it becomes the same weight of water, whose volume is exactly the volume that was displaced. So the water level does not change. (If the ice held a stone, the level would fall when it melts, because the stone would then sink and displace less than before.)
Floating: upthrust = weight; submerged fraction = ρ_body ÷ ρ_liquid. Weighed in two liquids: loss₁ ÷ loss₂ = ρ₁ ÷ ρ₂.
Traps
- Using the density of the body in place of the liquid when finding upthrust.
- Using the whole volume of a floating body to find the upthrust; use only the submerged volume.
- Forgetting that a body held fully under water has an upthrust larger than its weight, so the holding force is the difference.
Key takeaways
- Fraction submerged equals the density ratio.
- Extra load to sink a floater = full upthrust − weight.
- Losses of weight in two liquids are in the ratio of the liquid densities.
Check your understanding
-
1. A solid of density 800 kg/m³ floats in water. The fraction of its volume above the surface is:
- Four-fifths
- One-fifth
- One-half
- Three-fifths
Show answer
Answer: B. Submerged fraction = 800 ÷ 1000 = 0.8, so the fraction above the surface = 0.2 = one-fifth.
-
2. A body weighs 24 N in air and 16 N in water. Its relative density is:
- 1.5
- 2
- 3
- 8
Show answer
Answer: C. Loss of weight = 8 N. Relative density = weight in air ÷ loss = 24 ÷ 8 = 3.
-
3. A block of volume 0.002 m³ and weight 12 N is held completely under water by a string. The tension in the string is (g = 10 m/s²):
- 20 N
- 8 N
- 12 N
- 32 N
Show answer
Answer: B. Upthrust = 1000 × 10 × 0.002 = 20 N. Tension = upthrust − weight = 20 − 12 = 8 N.
-
4. An object loses 5 N of weight in water and 4 N in a liquid. The density of the liquid is:
- 800 kg/m³
- 1250 kg/m³
- 625 kg/m³
- 4000 kg/m³
Show answer
Answer: A. Densities are in the ratio of the losses: ρ = 1000 × 4 ÷ 5 = 800 kg/m³.
-
5. A ship sails from fresh water into a denser liquid. The volume of liquid it displaces:
- Increases
- Decreases
- Stays the same
- Becomes zero
Show answer
Answer: B. The ship's weight is unchanged, so the weight of liquid displaced is unchanged. A denser liquid needs a smaller volume to weigh the same, so the volume displaced decreases and the ship floats higher.
Sign in to keep track of the lessons you finish.