- Practice
- About 14 min
- 5 practice questions
Pascal's law and hydraulic machines
Apply Pascal's law to hydraulic lifts and brakes and relate force multiplication to the distance moved.
If something looks wrong, please tell us.
A small push on a thin piston can lift a car on a wide piston. This works because pressure applied to an enclosed liquid is passed on equally in all directions. The principle is behind hydraulic jacks, car brakes and garage lifts.
Pascal's law
A change in pressure applied to an enclosed incompressible fluid is transmitted undiminished to every point of the fluid and to the walls of the container. In a hydraulic press, the small piston of area A₁ gets force F₁ and the large piston of area A₂ gives force F₂: F₁/A₁ = F₂/A₂, so F₂ = F₁ × (A₂/A₁).
- Force is multiplied by the area ratio A₂/A₁.
- Work done is not multiplied: the small piston moves a distance d₁ and the large piston d₂ with F₁d₁ = F₂d₂, so d₂ = d₁ × (A₁/A₂).
- The liquid must be practically incompressible (oil, not air, in brakes).
Worked examples
Example 1. In a hydraulic lift, A₁ = 10 cm² and A₂ = 500 cm². A force F₁ = 100 N is applied to the small piston. F₂ = 100 × 500/10 = 5000 N.
Example 2. For the same press, if the small piston moves down 50 cm, the large piston moves up 50 × 10/500 = 1 cm. Check energy: F₁d₁ = 100 × 0.5 = 50 J and F₂d₂ = 5000 × 0.01 = 50 J.
Example 3. A car of 1200 kg is to be lifted on a platform of area 0.6 m² using a small piston of area 0.005 m². Weight = 12 000 N (g = 10). Pressure needed = 12 000/0.6 = 20 000 Pa. F₁ = 20 000 × 0.005 = 100 N.
Example 4. The radius of the large piston is 10 times that of the small one. The area ratio is 100, so the force is multiplied by 100.
F₁/A₁ = F₂/A₂. Force gain = area ratio, but distance moved is reduced by the same ratio, so work in = work out.
Key takeaways
- Pressure is equal at both pistons; forces differ in proportion to area.
- Hydraulic machines multiply force, not energy.
- A smaller piston must move farther than the larger one.
Check your understanding
-
1. The pistons of a hydraulic press have areas 5 cm² and 400 cm². What force on the small piston lifts a load of 3200 N?
- 400 N
- 40 N
- 640 N
- 8 N
Show answer
Answer: B. F₁ = F₂ × (A₁ ÷ A₂) = 3200 × 5 ÷ 400 = 40 N.
-
2. In the same press (areas 5 cm² and 400 cm²) the large piston rises 1.5 cm. How far does the small piston move down?
- 120 cm
- 0.019 cm
- 1.5 cm
- 80 cm
Show answer
Answer: A. d₁ = d₂ × (A₂ ÷ A₁) = 1.5 × 80 = 120 cm.
-
3. The radius of the large piston is 5 times that of the small piston. By what factor is the force multiplied?
- 25
- 5
- 10
- 125
Show answer
Answer: A. Area ∝ radius², so the area ratio = 5² = 25, and the force is multiplied by 25.
-
4. Why do hydraulic brakes use oil and not air?
- Air is too heavy to flow through pipes
- Air is compressible, so part of the push would be used in squeezing it
- Oil is compressible, which makes the brakes softer
- Air cannot exert any pressure
Show answer
Answer: B. A liquid is practically incompressible and passes on the pressure fully. Air would compress, so the brakes would feel spongy and weak.
-
5. A car of mass 1500 kg is on a platform of area 0.75 m². The small piston has an area of 0.01 m². What force on the small piston lifts the car? (g = 10 m/s²)
- 20 000 N
- 1125 N
- 200 N
- 2 N
Show answer
Answer: C. Weight = 15 000 N. Pressure needed = 15 000 ÷ 0.75 = 20 000 Pa. F₁ = 20 000 × 0.01 = 200 N.
Sign in to keep track of the lessons you finish.