- Practice
- 15 practice questions
Final self-assessment: simple machines
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before you check any answer. They are a little harder than the checks after each lesson. Which lesson each question comes from - questions 1-3: lesson 1, "Levers and the principle of moments"; questions 4-6: lesson 2, "Mechanical advantage, velocity ratio and efficiency"; questions 7-9: lesson 3, "Inclined plane, wedge and screw"; questions 10-12: lesson 4, "Pulleys and wheel and axle"; questions 13-15: lesson 5, "Gears, combined machines and everyday applications". Revisit that lesson for any question you missed.
Final self-assessment
-
1. A uniform plank 3 m long weighing 120 N rests on a support 1 m from end A. What load hung at end A balances it?
- 60 N
- 120 N
- 180 N
- 30 N
Show answer
Answer: A. The weight acts at the centre, 1.5 m from A, which is 0.5 m beyond the support: moment = 120 × 0.5 = 60 N m. The load at A is 1 m from the support: L × 1 = 60, so L = 60 N.
-
2. In a wheelbarrow the load is 0.4 m from the wheel axle and the effort is applied 1.2 m from it. What effort lifts a 900 N load (ideal)?
- 2700 N
- 450 N
- 225 N
- 300 N
Show answer
Answer: D. MA = effort arm ÷ load arm = 1.2 ÷ 0.4 = 3. Effort = 900 ÷ 3 = 300 N.
-
3. Which class of lever always has a mechanical advantage less than 1?
- First class
- Third class
- Second class
- None of the three classes
Show answer
Answer: B. In a third-class lever the effort lies between the fulcrum and the load, so the effort arm is always shorter than the load arm and MA < 1.
-
4. An effort of 50 N moves through 2 m and lifts an 80 N load through 1 m. What are the efficiency and the energy lost?
- 80%, with 20 J lost
- 62.5%, with 30 J lost
- 160%, with no energy lost
- 80%, with 80 J lost
Show answer
Answer: A. Work input = 50 × 2 = 100 J. Work output = 80 × 1 = 80 J. Efficiency = 80%, and 100 − 80 = 20 J is lost as heat.
-
5. A machine has MA = 4.5 and efficiency 75%. What is its velocity ratio?
- 3.375
- 5.25
- 6
- 0.17
Show answer
Answer: C. VR = MA ÷ efficiency = 4.5 ÷ 0.75 = 6.
-
6. For a real machine with friction, which relation holds?
- MA is greater than VR
- MA is less than VR
- MA equals VR
- VR is always 1
Show answer
Answer: B. Friction makes the actual effort larger, so MA = load ÷ effort is smaller than the VR, which depends only on distances.
-
7. A screw jack has a handle of radius 50 cm and a pitch of 5 mm, and is 25% efficient. About what load can an effort of 10 N lift?
- About 6280 N
- About 157 N
- About 393 N
- About 1570 N
Show answer
Answer: D. VR = 2π × 500 ÷ 5 ≈ 628. MA = 0.25 × 628 ≈ 157. Load = 157 × 10 ≈ 1570 N. (6280 N would need 100% efficiency.)
-
8. A 1000 N load is pushed up a ramp with VR = 4 using an effort of 400 N. What is the efficiency?
- 40%
- 160%
- 25%
- 62.5%
Show answer
Answer: D. MA = 1000 ÷ 400 = 2.5. Efficiency = 2.5 ÷ 4 × 100% = 62.5%.
-
9. A 600 N load is pushed up a smooth ramp inclined at 30° to the horizontal. What effort along the slope is needed? (sin 30° = 0.5)
- About 520 N
- 300 N
- 600 N
- 1200 N
Show answer
Answer: B. Ideal effort = W sin θ = 600 × 0.5 = 300 N (the same as W × h ÷ l, since h ÷ l = sin θ).
-
10. A single movable pulley weighing 20 N lifts a 180 N load. What effort is needed (no friction)?
- 90 N
- 110 N
- 100 N
- 200 N
Show answer
Answer: C. The two strands support the load and the pulley: effort = (180 + 20) ÷ 2 = 100 N.
-
11. A wheel of radius 30 cm is fixed to an axle of radius 5 cm. An actual effort of 60 N on the wheel lifts a 300 N load. What is the efficiency?
- About 83.3%
- 120%
- About 16.7%
- 50%
Show answer
Answer: A. VR = 30 ÷ 5 = 6. MA = 300 ÷ 60 = 5. Efficiency = 5 ÷ 6 × 100% ≈ 83.3%.
-
12. A block and tackle has 5 supporting strands and is 80% efficient. What effort lifts a 1000 N load?
- 200 N
- 312.5 N
- 250 N
- 800 N
Show answer
Answer: C. VR = 5. MA = 0.8 × 5 = 4. Effort = 1000 ÷ 4 = 250 N. (200 N is the ideal effort.)
-
13. A 20-tooth driver gear turning at 90 rpm meshes with a 60-tooth gear. How does the larger gear turn?
- At 30 rpm, in the same direction
- At 270 rpm, in the opposite direction
- At 270 rpm, in the same direction
- At 30 rpm, in the opposite direction
Show answer
Answer: D. N₂ = 90 × 20 ÷ 60 = 30 rpm. Meshed gears turn in opposite directions.
-
14. Two machines with VR = 2 and VR = 5 and efficiencies 90% and 70% are used in a chain. What effort lifts a 630 N load?
- 100 N
- 63 N
- 70 N
- 90 N
Show answer
Answer: A. Overall VR = 2 × 5 = 10. Overall efficiency = 0.9 × 0.7 = 0.63. MA = 0.63 × 10 = 6.3. Effort = 630 ÷ 6.3 = 100 N. (63 N is the ideal effort.)
-
15. Which statement about a fishing rod as a lever is correct?
- The load lies between the fulcrum and the effort, so MA > 1
- The effort lies between the fulcrum and the load, so MA < 1 but the tip moves quickly
- The fulcrum lies between the effort and the load, so MA is always 1
- The effort lies between the fulcrum and the load, so MA > 1
Show answer
Answer: B. A fishing rod is a third-class lever: the hand (effort) is between the end of the rod (fulcrum) and the fish (load). It gives up force (MA < 1) to move the tip fast through a large distance.
Sign in to keep track of the lessons you finish.