• Practice
  • About 26 min
  • 5 practice questions

Alkenes: isomerism, preparation and addition reactions

Name alkenes, recognise position, chain and cis–trans isomers, prepare alkenes by four routes, and predict addition products using Markovnikov's rule, carbocation rearrangement and the peroxide effect.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write IUPAC names of alkenes and decide whether cis–trans isomers exist.
  • Prepare alkenes from alcohols, alkynes, haloalkanes, vicinal dihalides and by Kolbe's method.
  • State Markovnikov's rule and explain it with the carbocation mechanism, including rearrangement.
  • Explain the peroxide (anti-Markovnikov) effect and why it applies only to HBr.

Alkenes have at least one C=C bond and the general formula CₙH₂ₙ. They are also called olefins (oil-makers) because ethene and chlorine give an oily liquid. The weak π bond of the double bond makes them far more reactive than alkanes.

Names and isomerism

Number the chain so that the double bond gets the lowest number: CH₃CH=CH₂ is propene, CH₂=CHCH₂CH₃ but-1-ene, CH₃CH=CHCH₃ but-2-ene, (CH₃)₂C=CH₂ 2-methylprop-1-ene, CH₂=CH–CH(CH₃)–CH₂CH₃ 3-methylpent-1-ene. Ethene and propene have no isomers; from C₄H₈, structural isomers appear: but-1-ene and but-2-ene are position isomers, while either of them and 2-methylpropene are chain isomers.

Because rotation about C=C is restricted, alkenes also show geometrical (cis–trans) isomerism, a type of stereoisomerism. Similar groups on the same side give the cis isomer; on opposite sides, the trans isomer. Cis- and trans-but-2-ene are the standard pair. Cis–trans isomers exist only if each doubly bonded carbon carries two different groups.

Worked example 1: can these show cis–trans isomerism?

(a) Pent-2-ene, CH₃–CH=CH–CH₂CH₃: C2 has H and CH₃ (different); C3 has H and C₂H₅ (different). Yes, cis and trans forms exist. (b) 2-Methylbut-2-ene, (CH₃)₂C=CH–CH₃: C2 has two CH₃ groups (identical). No cis–trans isomers. (c) 1-Bromopropene, BrCH=CH–CH₃: C1 has H and Br, C2 has H and CH₃. Yes.

Preparing alkenes

  1. Dehydration of alcohols: C₂H₅OH → CH₂=CH₂ + H₂O with excess concentrated H₂SO₄ at 430–440 K, or over Al₂O₃ at 623–723 K.
  2. Partial reduction of alkynes: H₂ with Lindlar's catalyst (palladium on calcium carbonate, partly poisoned) gives only the cis alkene: but-2-yne → cis-but-2-ene. Sodium in liquid ammonia gives only the trans alkene.
  3. Dehydrohalogenation: a haloalkane with alcoholic KOH loses HX: CH₃CH₂CH₂Br + KOH → CH₃CH=CH₂ + KBr + H₂O.
  4. Dehalogenation of vicinal dihalides (two halogens on neighbouring carbons): BrCH₂–CH₂Br + Zn → CH₂=CH₂ + ZnBr₂, warming with granulated zinc in methanol.
  5. Kolbe's method: electrolysis of aqueous potassium succinate gives ethene at the anode: ⁻OOC–CH₂–CH₂–COO⁻ → CH₂=CH₂ + 2CO₂ + 2e⁻.

Physical properties: the textbook states that the first three alkenes are gases, the next fourteen liquids and higher ones waxy solids; they are colourless and odourless except ethene, which smells sweet. Boiling points rise along the series and straight chains boil higher than branched isomers. They are slightly soluble in water and readily soluble in organic solvents.

Addition reactions

  • Hydrogen (catalytic hydrogenation): with Ni, Pd or Pt, alkene + H₂ → alkane. Hydrogenating vegetable oils makes vanaspati and reduces rancidity.
  • Halogens: Cl₂ or Br₂ add quickly to give a vicinal dihalide, CH₂=CH₂ + Br₂ → BrCH₂–CH₂Br. Iodine adds slowly, and the diiodide loses I₂ again.
  • Test for unsaturation: reddish-brown bromine water is decolourised by an alkene as the colourless dibromide forms.
  • Water (hydration): with acid catalyst, by a carbocation, following Markovnikov's rule: (CH₃)₂C=CH₂ + H₂O → (CH₃)₃C–OH (2-methylpropan-2-ol).
  • Hydrogen halides: reactivity HI > HBr > HCl; symmetrical alkenes give one product, CH₂=CH₂ + HBr → CH₃CH₂Br.
  • Cold concentrated H₂SO₄: propene → CH₃CH(OSO₃H)CH₃ (2-propyl hydrogen sulphate), which water hydrolyses to propan-2-ol.

Markovnikov's rule

When an unsymmetrical reagent HX adds to an unsymmetrical alkene, the hydrogen goes to the doubly bonded carbon that already has more hydrogens; the negative part X goes to the carbon with fewer hydrogens.

— Markovnikov's rule

Mechanism, HBr + propene. Step 1: H–Br is polar; the H⁺ (electrophile) attacks the π bond. It can make a primary carbocation CH₃CH₂CH₂⁺ or a secondary one CH₃CH⁺CH₃. Step 2: the secondary carbocation is more stable, so it forms predominantly. Step 3: Br⁻ attacks it, giving 2-bromopropane (major); 1-bromopropane is the minor product.

Rearrangement. With 3-methylbut-1-ene, H⁺ first gives a secondary carbocation, CH₃–CH⁺–CH(CH₃)₂. A hydrogen with its bond pair shifts from the neighbouring carbon (a hydride shift), producing the more stable tertiary cation CH₃–CH₂–C⁺(CH₃)₂. So the major product is 2-bromo-2-methylbutane, not the 2-bromo-3-methylbutane predicted by the rule alone.

The peroxide effect (anti-Markovnikov addition)

With an organic peroxide such as benzoyl peroxide, HBr adds to propene the other way round, giving 1-bromopropane. This is the peroxide effect (Kharasch effect). It goes by free radicals:

Free radical addition of HBr to propene (peroxide present)

  1. Peroxide splits (C₆H₅COO)₂ → 2C₆H₅COO• → 2C₆H₅• + 2CO₂
  2. Bromine radical forms C₆H₅• + HBr → C₆H₆ + Br•
  3. Br• adds to C1 Gives the more stable secondary radical CH₃–C•H–CH₂Br
  4. Radical takes H from HBr CH₃CH₂CH₂Br forms and Br• is regenerated

The effect is seen only with HBr. Using the bond energies quoted in the textbook (H–Cl 430.5, H–Br 363.7, H–I 296.8 kJ mol⁻¹): H–Cl is too strong to be broken by the radical, and although H–I breaks easily, the iodine atoms join to form I₂ instead of adding to the double bond.

Worked example 2: predicting the major product

2-Methylpropene, (CH₃)₂C=CH₂, with HBr. (a) No peroxide: H⁺ adds to CH₂ (more hydrogens), giving the tertiary cation (CH₃)₃C⁺; Br⁻ attacks it. Product: 2-bromo-2-methylpropane, (CH₃)₃CBr. (b) With peroxide: Br• adds to CH₂, giving the tertiary radical (CH₃)₂C•–CH₂Br, which takes H from HBr. Product: 1-bromo-2-methylpropane, (CH₃)₂CH–CH₂Br. Both have formula C₄H₉Br (C 4, H 8 + 1 = 9, Br 1).

Key takeaways: alkenes are CₙH₂ₙ and show position, chain and cis–trans isomerism. They add H₂, X₂, H₂O, HX and H₂SO₄. Ionic addition of HX follows Markovnikov's rule through the more stable carbocation (which may rearrange); HBr with peroxide adds the opposite way through the more stable radical.

Check your understanding

  1. 1. Which alkene shows geometrical (cis–trans) isomerism?

    1. But-1-ene
    2. 2-Methylbut-1-ene
    3. Hex-3-ene
    4. 2-Methylprop-1-ene
    Show answer

    Answer: C. In CH₃CH₂–CH=CH–CH₂CH₃ each doubly bonded carbon carries H and C₂H₅, two different groups, so cis and trans forms exist. The other three each have a carbon with two identical groups (=CH₂ in all three).

  2. 2. Which compound CANNOT exist as cis and trans isomers?

    1. Pent-2-ene
    2. 1-Bromoprop-1-ene
    3. 2,3-Dimethylbut-2-ene
    4. 1,2-Dichloroethene
    Show answer

    Answer: C. In (CH₃)₂C=C(CH₃)₂ each doubly bonded carbon carries two identical CH₃ groups, so swapping them gives the same molecule. The other three have two different groups on each carbon of the double bond.

  3. 3. Propene reacts with HBr in the absence of peroxide. The major product is

    1. 1-bromopropane
    2. 2-bromopropane
    3. 1,2-dibromopropane
    4. propane
    Show answer

    Answer: B. H⁺ adds to the CH₂ end to give the more stable secondary carbocation CH₃CH⁺CH₃; Br⁻ then bonds to the middle carbon. This is Markovnikov addition, giving 2-bromopropane.

  4. 4. The peroxide effect is observed with

    1. HCl only
    2. HI only
    3. HBr only
    4. HCl, HBr and HI
    Show answer

    Answer: C. The H–Cl bond is too strong to be split by radicals, and iodine atoms combine to I₂ rather than adding to the alkene. Only HBr gives a radical chain, so only HBr shows anti-Markovnikov addition with peroxide.

  5. 5. But-2-yne is reduced with H₂ and Lindlar's catalyst. The product is

    1. butane
    2. trans-but-2-ene
    3. but-1-ene
    4. cis-but-2-ene
    Show answer

    Answer: D. Lindlar's partly poisoned palladium adds just one molecule of H₂, both hydrogens arriving from the same side, so only cis-but-2-ene forms. Sodium in liquid ammonia would give the trans alkene.

Privacy · Terms · Refunds · Delivery