• Practice
  • About 28 min
  • 5 practice questions

Aromatic hydrocarbons: benzene, aromaticity and electrophilic substitution

Apply Hückel's rule, explain the structure of benzene, prepare benzene and toluene, write its electrophilic substitution, addition and oxidation reactions with mechanism, predict directive influence of substituents and state the hazards of PAHs.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name ortho, meta and para isomers and decide aromaticity with Hückel's (4n + 2) rule.
  • Explain the evidence for the structure of benzene, from Kekulé to the molecular orbital picture.
  • Write five electrophilic substitutions of benzene and the three-step mechanism.
  • Predict ortho–para or meta substitution from the group already on the ring.

Aromatic hydrocarbons contain the benzene ring. Monocyclic examples are benzene C₆H₆ and toluene C₇H₈; polycyclic ones (PAHs) include naphthalene C₁₀H₈ and anthracene C₁₄H₁₀. Benzene's ring is so stable that it prefers substitution to addition, which makes it chemically quite different from alkenes.

Names and isomers

All six hydrogens of benzene are equivalent, so there is only one monosubstituted product of each kind: toluene (methylbenzene), ethylbenzene, cumene (isopropylbenzene). A disubstituted benzene has three position isomers: ortho (1,2), meta (1,3) and para (1,4). The dimethylbenzenes are o-, m- and p-xylene.

Aromaticity and Hückel's rule

A ring is aromatic if it is planar, its π electrons are completely delocalised round the ring, and it has (4n + 2) π electrons, n = 0, 1, 2 ...

— Hückel's rule
Applying Hückel's rule
SpeciesPlanar and fully delocalised?π electronsAromatic?
BenzeneYes6 = 4(1) + 2Yes, n = 1
Cyclopentadienyl anionYes6 (two π bonds + lone pair)Yes, n = 1
FuranYes6 (two π bonds + one O lone pair)Yes, n = 1
Cyclopropenyl cationYes2 = 4(0) + 2Yes, n = 0
CyclopentadieneNo: the CH₂ carbon is sp³ and breaks the delocalisation4No
CyclooctatetraeneNo: the ring is non-planar (tub shaped)8No

The structure of benzene

  1. Analysis gives C₆H₆, which looks highly unsaturated, yet benzene does not decolourise Br₂ in CCl₄ or acidified KMnO₄ and does not add water: an open chain with double or triple bonds is ruled out.
  2. Only one monobromobenzene forms (C₆H₆ + Br₂ → C₆H₅Br + HBr, with a Lewis acid catalyst), so all six H are equivalent: a ring of six CH units.
  3. Benzene adds three moles of H₂ (Raney Ni) to give cyclohexane, C₆H₁₂: the ring holds the equivalent of three double bonds.
  4. Kekulé (1865) proposed a planar six-carbon ring with alternate single and double bonds. Objections: it predicts two different ortho-disubstituted products (substituents across a double bond or a single bond) but only one is known, and it cannot explain why benzene resists addition. Kekulé suggested the two forms interconvert rapidly.
  5. Resonance: the two Kekulé structures are resonance forms; benzene is their hybrid, drawn as a hexagon with a circle.
  6. Spectroscopy: benzene is planar and all six C–C bonds are 1.40 Å, between C–C (1.54 Å) and C=C (1.34 Å).
  7. Molecular orbital picture: each carbon is sp²; sp²–s overlap gives six C–H σ bonds and sp²–sp² overlap six C–C σ bonds, all in one plane at 120°. Each carbon's unhybridised p orbital (one electron) overlaps sideways with both neighbours, so six π electrons are delocalised over the whole ring, giving great stability.

Sources and preparation

Benzene and other aromatics come from coal tar and petroleum. When coal tar is fractionally distilled, the textbook lists crude light oil (350–443 K: benzene, toluene, xylenes), middle oil (443–503 K: phenol, naphthalene), heavy oil (503–543 K: naphthalene, cresol), green oil (543–633 K: anthracene) and pitch (residue above 633 K).

  • From acetylene: 3HC≡CH → C₆H₆ (red-hot iron tube, 873 K).
  • Decarboxylation: C₆H₅COONa + NaOH → C₆H₆ + Na₂CO₃ (soda lime).
  • From phenol: C₆H₅OH + Zn → C₆H₆ + ZnO (vapour over zinc dust).
  • Wurtz–Fittig: C₆H₅Br + CH₃I + 2Na → C₆H₅CH₃ + NaBr + NaI (dry ether) gives toluene.
  • Friedel–Crafts: C₆H₆ + CH₃Cl → C₆H₅CH₃ + HCl (anhydrous AlCl₃) gives toluene.

Benzene is a colourless liquid, insoluble in water, soluble in alcohol, ether and chloroform. It burns with a luminous, sooty flame (unlike the bluish flame of alkanes), and its vapour is toxic.

Electrophilic substitution

Electrophilic substitution reactions of benzene
ReactionReagentsElectrophileProduct
NitrationConc. HNO₃ + conc. H₂SO₄, 330 KNO₂⁺Nitrobenzene + H₂O
HalogenationCl₂ or Br₂ with FeCl₃, FeBr₃ or AlCl₃Cl⁺ or Br⁺Chlorobenzene or bromobenzene + HX
SulphonationFuming H₂SO₄ (conc. H₂SO₄ + SO₃); reversibleSO₃ (neutral, sulphur short of an octet)Benzenesulphonic acid
Friedel–Crafts alkylationCH₃Cl + anhydrous AlCl₃CH₃⁺Toluene + HCl
Friedel–Crafts acylationCH₃COCl + anhydrous AlCl₃CH₃CO⁺Acetophenone + HCl

Mechanism of aromatic electrophilic substitution

  1. 1. Electrophile forms E–Nu + catalyst → E⁺ + Nu–catalyst, e.g. HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻
  2. 2. E⁺ attacks the ring A carbocation (arenium ion) forms, stabilised by resonance over three carbons; slow step
  3. 3. H⁺ is lost The base removes H⁺ from the carbon bearing E; the aromatic ring is restored

Why substitution and not addition? Addition would destroy the delocalised six-π-electron system and its extra stability; substitution keeps it. Alkenes have no such ring to protect, so they add.

Addition and oxidation of benzene

  • Hydrogenation: C₆H₆ + 3H₂ → C₆H₁₂ (Pt or Pd).
  • Chlorination in UV light: C₆H₆ + 3Cl₂ → C₆H₆Cl₆, benzene hexachloride (BHC); its gamma isomer, gammaxane or lindane, was used as an insecticide.
  • Vapour-phase oxidation: with O₂ over V₂O₅ at 773 K the ring breaks to maleic anhydride: 2C₆H₆ + 9O₂ → 2C₄H₂O₃ + 4CO₂ + 4H₂O.
  • Birch reduction: Na or Li in liquid NH₃ with an alcohol gives cyclohexa-1,4-diene.

Worked example 1: balancing the maleic anhydride equation

2C₆H₆ + 9O₂ → 2C₄H₂O₃ + 4CO₂ + 4H₂O. Carbon: 12 = 8 + 4. Hydrogen: 12 = 4 + 8. Oxygen: 18 = 6 + 8 + 4 = 18. Balanced. Per mole of benzene, 4.5 mol O₂ is used.

Directive influence of substituents

In a monosubstituted benzene, the group already present decides both the rate (activating or deactivating) and the position of the next substitution.

Ortho–para directors and meta directors

  • Ortho–para directors
    • Activating: –OH, –NH₂, –NHR, –NHCOCH₃, –OCH₃, –CH₃, –C₂H₅
    • Lone pair (or +I/hyperconjugation) feeds electrons into the ring
    • Resonance puts negative charge at ortho and para
    • Halogens: o,p-directing but deactivating (strong −I, weaker +M)
  • Meta directors
    • Deactivating: –NO₂, –CN, –CHO, –COR, –COOH, –COOR, –SO₃H
    • Withdraw electrons by −I and −M
    • Resonance puts positive charge at ortho and para
    • Meta is the least electron-poor, so attack goes there

Worked example 2: planning a two-step synthesis

Make 1-methyl-4-nitrobenzene (p-nitrotoluene) from benzene. Step 1: Friedel–Crafts methylation, C₆H₆ + CH₃Cl → C₆H₅CH₃ + HCl. Step 2: nitrate toluene; –CH₃ is an activating o,p-director, so NO₂⁺ enters at ortho and para, and the para isomer is separated. Doing it the other way round fails: –NO₂ is a strong deactivator and meta director, and nitrobenzene does not undergo Friedel–Crafts reactions easily. Order matters: methylate first, then nitrate. Toluene also nitrates faster than benzene, because the methyl group makes the ring richer in electrons.

Toxicity and carcinogenicity

Benzene and polycyclic aromatic hydrocarbons are widespread pollutants formed by incomplete burning of coal, oil, petrol and wood, and also released by natural seepage and volcanoes. They are toxic, mutagenic and carcinogenic, affecting blood, immunity and nerves; long exposure can damage genes. The textbook gives benzo[a]pyrene (cigarette smoke), 1,2-benzanthracene and 1,2,5,6-dibenzanthracene (exhaust gases and charred or barbecued food) as examples, and notes that angular (L-shaped) PAHs are particularly harmful.

Key takeaways: aromatic = planar, fully delocalised, 4n + 2 π electrons. Benzene's six equal 1.40 Å bonds and delocalised π cloud explain why it substitutes rather than adds. Electrophilic substitution goes electrophile → arenium ion → loss of H⁺. Electron-releasing groups direct ortho–para and activate; electron-withdrawing groups direct meta and deactivate; halogens are the o,p-directing deactivators.

Check your understanding

  1. 1. Which species is NOT aromatic?

    1. Cyclopentadienyl anion
    2. Cyclopropenyl cation
    3. Cyclooctatetraene
    4. Furan
    Show answer

    Answer: C. Cyclooctatetraene has 8 π electrons (not 4n + 2) and its ring is tub-shaped, not planar, so its π electrons are not delocalised round the ring. The other three are planar with 6, 2 and 6 π electrons respectively.

  2. 2. In the nitration of benzene, the role of concentrated H₂SO₄ is to

    1. generate the nitronium ion NO₂⁺ from HNO₃
    2. act as the nucleophile
    3. dehydrate benzene
    4. provide SO₃ as the electrophile
    Show answer

    Answer: A. Sulphuric acid protonates nitric acid, which loses water to give NO₂⁺: HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻. NO₂⁺ is the electrophile that attacks the ring.

  3. 3. Which group is a meta director?

    1. –OH
    2. –CH₃
    3. –Cl
    4. –CHO
    Show answer

    Answer: D. The aldehyde group withdraws electrons by −I and −M, leaving positive charge at the ortho and para positions; meta is attacked. –OH and –CH₃ are activating o,p-directors, and –Cl is a deactivating o,p-director.

  4. 4. All six C–C bonds in benzene are 1.40 Å long. What does this show?

    1. Benzene has three single and three double bonds that stay fixed
    2. The π electrons are delocalised, so every bond is intermediate between single and double
    3. Benzene is an alkyne
    4. Benzene is not planar
    Show answer

    Answer: B. If the bonds were fixed, there would be three bonds of 1.54 Å and three of 1.34 Å. Equal 1.40 Å bonds mean each bond is the same mixture, as expected for the resonance hybrid with delocalised π electrons.

  5. 5. How many moles of H₂ are needed to convert 39 g of benzene completely into cyclohexane? (C = 12, H = 1)

    1. 0.5
    2. 1.5
    3. 3
    4. 6
    Show answer

    Answer: B. Molar mass of C₆H₆ = 72 + 6 = 78 g mol⁻¹, so 39 g = 0.5 mol. C₆H₆ + 3H₂ → C₆H₁₂ needs 3 mol H₂ per mol benzene: 0.5 × 3 = 1.5 mol H₂.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Hydrocarbons

Privacy · Terms · Refunds · Delivery