- Practice
- About 25 min
- 5 practice questions
Classification of hydrocarbons and the preparation of alkanes
Classify hydrocarbons, name branched alkanes and their chain isomers, prepare alkanes by hydrogenation, decarboxylation, Kolbe's method, reduction, Wurtz, Corey–House and Grignard routes, and explain their physical properties.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify a hydrocarbon as aliphatic or aromatic, saturated or unsaturated, open-chain or cyclic.
- Name branched alkanes and draw the chain isomers of a formula.
- Write balanced equations for six methods of preparing alkanes.
- Explain the trends in boiling point, solubility and density of alkanes.
Hydrocarbons contain only carbon and hydrogen. Crude oil is a complex mixture of them, LPG (liquefied petroleum gas) is a mixture of propane and butane, and the Tamil Nadu textbook mentions that mangoes contain cyclohexane. They are used mainly as fuels and also as solvents and raw materials for industry.
Classification
Hydrocarbons
-
Aliphatic, open-chain (acyclic)
- Alkanes, saturated: ethane
- Alkenes, unsaturated (C=C): ethene
- Alkynes, unsaturated (C≡C): ethyne
-
Aliphatic, cyclic
- Cycloalkanes: cyclobutane
- Cycloalkenes: cyclobutene
- Cycloalkynes
-
Aromatic (arenes)
- Contain the benzene ring or its derivatives
- Example: benzene, toluene
Aliphatic comes from the Greek word for fat; aromatic from the pleasant smell of the plant extracts in which such compounds were first found. Compounds with localised C=C or C≡C bonds are unsaturated; alkanes, with only single bonds, are saturated.
Alkanes, their names and chain isomerism
Alkanes have the general formula CₙH₂ₙ₊₂: methane CH₄, ethane C₂H₆, propane C₃H₈, butane C₄H₁₀, pentane C₅H₁₂, each differing from the next by –CH₂–. Methane, formed when plants decay without enough air in swamps and marshes, is also called marsh gas. The first three alkanes have only one structure each. From C₄H₁₀ onwards, different carbon chains are possible: n-butane (unbranched) and isobutane, IUPAC name 2-methylpropane. Isomers that differ in the carbon chain are chain isomers. C₅H₁₂ has three: pentane, 2-methylbutane and 2,2-dimethylpropane.
Worked example 1: from a name to a structure
Draw 4-ethyl-2,3-dimethylheptane. Step 1: the parent is heptane, a chain of seven carbons, C1 to C7. Step 2: put CH₃ groups on C2 and C3 and a –CH₂CH₃ group on C4. Step 3: add hydrogens so that every carbon has four bonds: CH₃–CH(CH₃)–CH(CH₃)–CH(C₂H₅)–CH₂–CH₂–CH₃. Step 4, check the formula: main chain 7 C, branches 1 + 1 + 2 = 4 C, total 11 C; for C₁₁ an alkane needs 2(11) + 2 = 24 H. Counting: 3 + 1 + 1 + 1 + 2 + 2 + 3 = 13 on the chain, plus 3 + 3 + 5 = 11 on the branches, total 24. C₁₁H₂₄, as required.
Preparation of alkanes
| Method | Reagents | Example |
|---|---|---|
| Catalytic hydrogenation | H₂ with Pt or Pd; with Ni this is the Sabatier–Senderens reaction | CH₂=CH₂ + H₂ → CH₃–CH₃; CH₃C≡CH + 2H₂ → CH₃CH₂CH₃ |
| Decarboxylation | Sodium salt of the acid heated with soda lime (NaOH + CaO); one carbon fewer | CH₃COONa + NaOH → CH₄ + Na₂CO₃ |
| Kolbe's electrolytic method | Electrolysis of Na or K salt of the acid; gives symmetrical alkanes R–R | 2CH₃COONa + 2H₂O → C₂H₆ + 2CO₂ (anode) + H₂ + 2NaOH (cathode) |
| Reduction of alkyl halides | Nascent hydrogen from Zn + HCl, Zn + CH₃COOH, Zn–Cu couple in ethanol, or LiAlH₄ (not alkyl fluorides) | CH₃CH₂CH₂Cl + 2[H] → CH₃CH₂CH₃ + HCl |
| Wurtz reaction | Alkyl halide + sodium in dry ether; best for even-carbon alkanes | 2CH₃Br + 2Na → CH₃–CH₃ + 2NaBr |
| Corey–House method | Alkyl halide + lithium dialkylcuprate | CH₃CH₂Br + (CH₃)₂CuLi → CH₃CH₂CH₃ + CH₃Cu + LiBr |
| From Grignard reagents | RMgX (made from R–X + Mg in dry ether) + water or any compound with replaceable H | CH₃MgCl + H₂O → CH₄ + Mg(OH)Cl |
In a Grignard reagent the alkyl group is bonded directly to magnesium and behaves like a carbanion, so it snatches a proton from water. That is why Grignard reagents must be made and kept in dry ether: water destroys them.
Worked example 2: decarboxylation of sodium butanoate
CH₃CH₂CH₂COONa + NaOH → CH₃CH₂CH₃ + Na₂CO₃ (heated with CaO). Atom check: C 4 = 3 + 1; H 7 + 1 = 8 = 8; O 2 + 1 = 3 = 3; Na 1 + 1 = 2 = 2. Product: propane, C₃H₈, one carbon fewer than the four-carbon acid.
Worked example 3: Kolbe electrolysis of sodium propanoate
Two propanoate ions each lose CO₂ at the anode and the two ethyl radicals join: 2CH₃CH₂COONa + 2H₂O → CH₃CH₂CH₂CH₃ + 2CO₂ + H₂ + 2NaOH. Atom check: C 6 = 4 + 2; H 10 + 4 = 14 and 10 + 2 + 2 = 14; O 4 + 2 = 6 and 4 + 2 = 6; Na 2 = 2. Butane forms at the anode; H₂ and NaOH at the cathode. Because two alkyl groups always join, Kolbe's method cannot make methane (the smallest product is ethane).
Soda lime removes one carbon (RCOONa → RH). Kolbe and Wurtz double the alkyl group (→ R–R).
Physical properties
- State at room temperature: C₁–C₄ gases, C₅–C₁₇ liquids, C₁₈ and above solids.
- Boiling point rises along the series (roughly 30 °C per extra carbon in the textbook's figure) because larger molecules have larger surface area and stronger van der Waals forces.
- Branching lowers the boiling point: a compact, branched molecule has less surface contact than its straight-chain isomer.
- Non-polar, so insoluble in water and soluble in non-polar solvents; less dense than water, so they float. Oil spills spread over water for this reason, and alkane coatings protect metals from water.
Key takeaways: alkanes are CₙH₂ₙ₊₂ and show chain isomerism from C₄. Hydrogenation keeps the carbon count, soda lime removes one carbon, Kolbe and Wurtz double the alkyl group. Boiling point rises with chain length and falls with branching.
Check your understanding
-
1. CH₃CH₂Br + (CH₃)₂CuLi → CH₃CH₂CH₃ + CH₃Cu + LiBr. This method of making an alkane is called
- the Wurtz reaction
- Kolbe's electrolytic method
- the Corey–House method
- decarboxylation
Show answer
Answer: C. An alkyl halide reacting with a lithium dialkylcuprate is the Corey–House method. Unlike the Wurtz reaction it joins two different alkyl groups cleanly, here ethyl and methyl to give propane.
-
2. Which alkane is formed when sodium 2-methylpropanoate, (CH₃)₂CHCOONa, is heated with soda lime?
- 2-Methylpropane
- Propane
- Butane
- Ethane
Show answer
Answer: B. Decarboxylation replaces –COONa by H: (CH₃)₂CH–COONa + NaOH → (CH₃)₂CH–H + Na₂CO₃. (CH₃)₂CH–H is CH₃CH₂CH₃, propane, one carbon fewer than the four-carbon acid.
-
3. Which alkane forms at the anode when aqueous sodium butanoate, CH₃CH₂CH₂COONa, is electrolysed?
- Propane
- Butane
- Octane
- Hexane
Show answer
Answer: D. Each butanoate loses CO₂ to give a propyl radical, CH₃CH₂CH₂•, and two propyl radicals join: CH₃CH₂CH₂–CH₂CH₂CH₃, hexane (C₆H₁₄). Kolbe's method doubles the alkyl group.
-
4. Which of these isomers of C₅H₁₂ has the lowest boiling point?
- Pentane
- 2-Methylbutane
- All three boil at the same temperature
- 2,2-Dimethylpropane
Show answer
Answer: D. All have the same molar mass, so the difference comes from shape. 2,2-Dimethylpropane is the most branched and nearly spherical, with the least surface contact and weakest van der Waals forces, so it boils lowest.
-
5. Ethylmagnesium bromide, CH₃CH₂MgBr, is added to water. The organic product is
- ethanol
- ethane
- butane
- ethene
Show answer
Answer: B. The ethyl group bonded to magnesium behaves like a carbanion and takes H⁺ from water: CH₃CH₂MgBr + H₂O → CH₃CH₃ + Mg(OH)Br. This is also why Grignard reagents must be kept dry.
Sign in to keep track of the lessons you finish.