- Practice
- About 26 min
- 5 practice questions
Oxidation, ozonolysis and polymerisation of alkenes, and the chemistry of alkynes
Use Baeyer's reagent, acidified KMnO₄ and ozonolysis to locate double bonds, describe addition polymers, prepare alkynes, explain the acidity of terminal alkynes and write their addition, hydration, ozonolysis and polymerisation reactions.
If something looks wrong, please tell us.
By the end of this lesson you can
- Predict products of alkenes with cold dilute alkaline KMnO₄, acidified KMnO₄ and ozone.
- Work back from ozonolysis products to the structure of an alkene.
- Prepare alkynes and explain why only terminal alkynes are acidic.
- Write the addition, hydration, ozonolysis and polymerisation reactions of alkynes.
Oxidation reactions of alkenes are tests for unsaturation and tell us where the double bond is. Alkynes share many addition reactions with alkenes, but their sp carbons give them one new property: a weakly acidic hydrogen.
Oxidation of alkenes
- Cold dilute alkaline KMnO₄ (Baeyer's reagent), about 273 K: gives a vicinal diol: CH₂=CH₂ + H₂O + [O] → HOCH₂–CH₂OH (ethane-1,2-diol). The textbook describes the purple solution (Mn⁷⁺) turning dark green (Mn⁶⁺) and then giving a dark brown precipitate of MnO₂ (Mn⁴⁺).
- Acidified KMnO₄: cleaves the C=C bond. A =CH₂ end becomes CO₂ + H₂O, a =CHR end becomes RCOOH (via RCHO), and a =CR₂ end becomes a ketone R₂C=O. The purple colour disappears, another test for unsaturation.
- Ozonolysis: O₃ adds to form an ozonide, which Zn/H₂O cleaves into two carbonyl compounds, one from each end of the C=C bond. Ethene gives 2HCHO; propene gives HCHO + CH₃CHO.
Ozonolysis: cut the C=C bond and put =O on each carbon. Reverse it: join the two C=O carbons with a double bond.
Worked example 1: oxidising 2-methylpropene with acidified KMnO₄
(CH₃)₂C=CH₂. Left end, =C(CH₃)₂, has no hydrogen, so it becomes the ketone (CH₃)₂C=O, propan-2-one. Right end, =CH₂, is oxidised to CO₂ and H₂O. Products: propan-2-one, CO₂ and H₂O. Carbon check: 4 C in the alkene = 3 in acetone + 1 in CO₂.
Worked example 2: finding an alkene from its ozonolysis products
An alkene C₅H₁₀ gives propan-2-one and ethanal on ozonolysis. Step 1: the two products come from the two ends of one C=C bond. Step 2: carbon count: (CH₃)₂C=O has 3 C and CH₃CHO has 2 C; 3 + 2 = 5, matching C₅. Step 3: remove the two oxygens and join the carbonyl carbons: (CH₃)₂C=CH–CH₃. Answer: 2-methylbut-2-ene. Check H: 3 + 3 + 1 + 3 = 10, so C₅H₁₀.
Polymerisation
A polymer is a large molecule built from many small units (monomers). At high temperature and pressure with a catalyst, alkenes form addition polymers: n CH₂=CH₂ → –(CH₂–CH₂)ₙ– (polythene); propene gives polypropene; styrene, C₆H₅CH=CH₂, gives polystyrene. Ethene is the main feedstock for the polymer industry, and the textbook lists codes used to sort plastics for recycling, such as 1 PET, 2 HDPE, 3 PVC, 4 LDPE, 5 PP, 6 PS and 7 others.
Alkynes: names and preparation
Alkynes contain a C≡C bond and have the general formula CₙH₂ₙ₋₂. The first member, ethyne, is commonly called acetylene and is burnt in the oxyacetylene torch for welding. Examples: propyne CH₃C≡CH, but-1-yne CH₃CH₂C≡CH, but-2-yne CH₃C≡CCH₃, 3-methylbut-1-yne (CH₃)₂CHC≡CH.
| Method | Example |
|---|---|
| From an alkene in two steps: add Br₂, then remove 2HBr (alcoholic KOH, then NaNH₂) | CH₂=CH₂ → BrCH₂CH₂Br → CH₂=CHBr → HC≡CH |
| From a gem dihalide (two halogens on one carbon) with alcoholic KOH | CH₃CH₂CHCl₂ → CH₃CH=CHCl → CH₃C≡CH (1,1-dichloropropane to propyne) |
| Kolbe electrolysis of potassium maleate or fumarate | ⁻OOC–CH=CH–COO⁻ → HC≡CH + 2CO₂ + 2e⁻ at the anode |
| Industrial: calcium carbide and water | CaO + 3C → CaC₂ + CO (electric furnace, 3273 K); CaC₂ + 2H₂O → HC≡CH + Ca(OH)₂ |
Worked example 3: acetylene from calcium carbide
What mass of ethyne can 128 g of CaC₂ give? Molar mass CaC₂ = 40 + 2 × 12 = 64 g mol⁻¹, so 128 g = 2 mol. From CaC₂ + 2H₂O → C₂H₂ + Ca(OH)₂, 1 mol CaC₂ gives 1 mol C₂H₂ (26 g mol⁻¹). Mass of ethyne = 2 × 26 = 52 g. Equation check: Ca 1 = 1; C 2 = 2; H 4 = 2 + 2; O 2 = 2.
Physical properties (as given in the textbook): the first three alkynes are gases, the next eight liquids and the rest solids; slightly soluble in water, readily soluble in organic solvents. Ordinary acetylene has a garlic-like smell.
Acidity of terminal alkynes
A hydrogen on a triply bonded carbon is weakly acidic. The sp orbital has 50% s character, more than sp² (33%) or sp³ (25%), so it holds electrons closer to the nucleus and the carbon behaves as more electronegative; the C–H pair stays on carbon when H⁺ is removed. Terminal alkynes therefore form metal salts: but-1-yne with ammoniacal AgNO₃ gives a precipitate of silver butynide, CH₃CH₂C≡CAg, and with ammoniacal Cu₂Cl₂ gives copper butynide. But-2-yne has no ≡C–H and does not react, which is how the two are told apart.
Reactions of alkynes
- Hydrogen: HC≡CH + H₂ → CH₂=CH₂, then + H₂ → CH₃CH₃ (Pt).
- Bromine: reddish-brown Br₂ in CCl₄ is decolourised: propyne → 1,2-dibromopropene → 1,1,2,2-tetrabromopropane.
- Hydrogen halides (Markovnikov): but-2-yne + HCl → 2-chlorobut-2-ene, then + HCl → 2,2-dichlorobutane; but-1-yne + 2HBr → 2,2-dibromobutane.
- Water: with HgSO₄ and dilute H₂SO₄ at 333 K, an enol forms and rearranges to a carbonyl compound: ethyne → acetaldehyde; propyne → propan-2-one.
- Ozone: ozonide, then water; ethyne gives glyoxal, which the H₂O₂ formed oxidises to methanoic acid; propyne gives ethanoic and methanoic acids.
- Linear polymerisation: 2HC≡CH → CH₂=CH–C≡CH (vinylacetylene) with Cu₂Cl₂/NH₄Cl. Cyclic polymerisation: 3HC≡CH → C₆H₆ through a red-hot iron tube at 873 K.
Acetylene is used in welding torches and to make PVC, polyvinyl acetate, polyvinyl ether, orlon and neoprene rubber.
Key takeaways: Baeyer's reagent gives diols, acidified KMnO₄ and ozone cleave the double bond, and ozonolysis products reveal its position. Alkynes (CₙH₂ₙ₋₂) add two molecules of H₂, X₂ or HX; hydration gives aldehydes or ketones; terminal ≡C–H is acidic because sp carbon has 50% s character; ethyne trimerises to benzene.
Check your understanding
-
1. An alkene gives methanal (HCHO) and propan-2-one on ozonolysis. The alkene is
- but-1-ene
- but-2-ene
- 2-methylpropene
- 2-methylbut-2-ene
Show answer
Answer: C. Join the two carbonyl carbons by a double bond: H₂C=O and O=C(CH₃)₂ give H₂C=C(CH₃)₂, 2-methylpropene. But-1-ene would give HCHO + CH₃CH₂CHO, but-2-ene only CH₃CHO, and 2-methylbut-2-ene acetone + CH₃CHO.
-
2. Ethene is passed through cold dilute alkaline KMnO₄. The organic product is
- ethane-1,2-diol
- ethanal
- ethanoic acid
- ethanol
Show answer
Answer: A. Baeyer's reagent adds two –OH groups across the double bond without breaking the carbon chain: CH₂=CH₂ + H₂O + [O] → HOCH₂CH₂OH. Acidified KMnO₄ would cleave the bond instead.
-
3. Why is the hydrogen of ethyne acidic while that of ethane is not?
- Ethyne has more hydrogens
- The sp carbon of ethyne has 50% s character and holds the bond pair more tightly
- Ethane is a gas
- Ethyne has a lone pair on carbon
Show answer
Answer: B. More s character keeps electrons closer to the nucleus, making the sp carbon more electronegative than an sp³ carbon (25% s). After H⁺ leaves, the acetylide ion holds its lone pair in that stable sp orbital.
-
4. Propyne is warmed with HgSO₄ and dilute H₂SO₄ at 333 K. The product is
- propanal
- propan-1-ol
- propanoic acid
- propan-2-one
Show answer
Answer: D. Water adds by Markovnikov's rule, putting OH on the middle carbon: CH₃C(OH)=CH₂, an enol. This rearranges to the more stable keto form, CH₃COCH₃, propan-2-one.
-
5. Which reagent tells but-1-yne from but-2-yne?
- Bromine water
- Ammoniacal silver nitrate
- Hydrogen with Pt
- Acidified KMnO₄
Show answer
Answer: B. Only but-1-yne has a terminal ≡C–H, so only it gives a precipitate of silver butynide with ammoniacal AgNO₃. Both alkynes decolourise bromine and KMnO₄ and both add hydrogen.
Sign in to keep track of the lessons you finish.