• Practice
  • About 25 min
  • 5 practice questions

Conformations and chemical reactions of alkanes

Describe the staggered, eclipsed and skew conformations of ethane and n-butane, and write the combustion, free radical halogenation, aromatisation, steam reforming, cracking and isomerisation reactions of alkanes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Draw and compare the conformations of ethane and n-butane in Newman projection.
  • Balance combustion equations and calculate the heat released.
  • Explain the chlorination of methane by initiation, propagation and termination.
  • Describe aromatisation, steam reforming, pyrolysis (cracking) and isomerisation, and list uses of alkanes.

The old name for alkanes, paraffins, means little activity: alkanes resist most reagents. Under the right conditions, though, they burn, react with halogens, break down and rearrange, and these reactions are the basis of the fuel and petroleum industries.

Conformations

Every carbon in an alkane is sp³ hybridised and tetrahedral, and there is (nearly) free rotation about each C–C single bond. The different three-dimensional arrangements produced by this rotation, which change into one another easily, are conformations (conformers). They are drawn as Newman projections: looking along the C–C bond, the front carbon is a point and the back carbon a circle.

  • Ethane, eclipsed: the hydrogens of the back carbon lie directly behind those of the front carbon; repulsion is greatest, so it is the least stable.
  • Ethane, staggered: each back hydrogen sits between two front hydrogens; repulsion is least, so it is the most stable.
  • Skew: the countless arrangements between these two extremes.
  • Stability: staggered > skew > eclipsed. The energy difference between staggered and eclipsed ethane is about 12.5 kJ mol⁻¹, small enough for rapid rotation at room temperature.

n-Butane can be viewed as ethane with one hydrogen on each carbon replaced by CH₃; we look along the C2–C3 bond. In the fully eclipsed form the two methyl groups are directly in line (dihedral angle 0°), the least stable form. In the anti (staggered, 180°) form they are as far apart as possible, the most stable form. Between them are the gauche forms (methyls 60° apart, staggered) and the other eclipsed forms (methyl eclipsing H, 120°). Order of stability: anti > gauche > eclipsed > fully eclipsed.

Rotating about C2–C3 in n-butane (stability shown in brackets)

  1. Anti, 180° Most stable: methyls farthest apart
  2. Eclipsed, 120° CH₃ in line with H: less stable
  3. Gauche, 60° Staggered, methyls close: fairly stable
  4. Fully eclipsed, 0° CH₃ behind CH₃: least stable

Combustion

With enough oxygen, alkanes burn to carbon dioxide and water, releasing a lot of heat: CH₄ + 2O₂ → CO₂ + 2H₂O, ΔH° = −890.4 kJ (value from the textbook). With too little oxygen they give carbon monoxide or carbon black: 2CH₄ + 3O₂ → 2CO + 4H₂O and CH₄ + O₂ → C + 2H₂O. Carbon black is used in ink, printer ink and black pigments, and as a filler. For any alkane: CₙH₂ₙ₊₂ + ((3n + 1)/2) O₂ → nCO₂ + (n + 1)H₂O.

Worked example 1: heat from burning propane

Balance: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O (n = 3, so O₂ = (9 + 1)/2 = 5). Check: C 3 = 3; H 8 = 8; O 10 = 6 + 4. The textbook gives ΔH° = −2220 kJ for one mole of propane. Heat from 11 g of propane (molar mass 3 × 12 + 8 × 1 = 44 g mol⁻¹): moles = 11 ÷ 44 = 0.25 mol; heat = 0.25 × 2220 = 555 kJ released.

Halogenation by a free radical chain

In light or on heating, chlorine replaces the hydrogens of methane one at a time: CH₄ → CH₃Cl (methyl chloride) → CH₂Cl₂ (methylene chloride) → CHCl₃ (chloroform) → CCl₄ (carbon tetrachloride), with HCl formed at each step. Chlorination and bromination are useful; fluorination is too violent and iodination too slow.

Free radical chlorination of methane

  1. Initiation UV light: Cl–Cl → 2Cl• (the Cl–Cl bond is weaker than C–H)
  2. Propagation (a) Cl• + CH₄ → •CH₃ + HCl
  3. Propagation (b) •CH₃ + Cl₂ → CH₃Cl + Cl•; the Cl• returns to step (a)
  4. Termination Cl• + Cl• → Cl₂; •CH₃ + •CH₃ → C₂H₆; •CH₃ + Cl• → CH₃Cl

Worked example 2: why ethane appears in methane chlorination

Step 1: propagation (a) makes methyl radicals. Step 2: when the reactants run low, two radicals may meet. Step 3: if both are methyl radicals, •CH₃ + •CH₃ → CH₃–CH₃. Electron check: each radical brings one electron, and the new C–C bond holds two. So a little ethane forms during termination, a strong piece of evidence for the free radical mechanism.

Other reactions of alkanes

  • Aromatisation: alkanes with 6–10 carbons cyclise and lose hydrogen over Cr₂O₃ on Al₂O₃ at 873 K. n-Hexane gives benzene: C₆H₁₄ → C₆H₆ + 4H₂ (H: 14 = 6 + 8). n-Heptane gives toluene in the same way.
  • Reaction with steam (steam reforming): CH₄ + H₂O → CO + 3H₂, over Ni at 1273 K; an industrial source of hydrogen.
  • Pyrolysis (cracking): heating without air breaks alkanes into smaller alkanes, alkenes and hydrogen, for example C₃H₈ → CH₂=CH₂ + CH₄ or CH₃CH=CH₂ + H₂ at 773 K. Larger and more branched alkanes crack more easily.
  • Isomerisation: n-alkanes become branched alkanes with AlCl₃ and HCl at 298 K, for example n-butane → 2-methylpropane; this improves the quality of petrol.
Uses of alkanes by chain length (from the textbook's table)
Carbon atomsStateMain uses
1–4GasHeating and cooking fuel (natural gas, LPG)
5–7Low-boiling liquidSolvents, petrol (gasoline)
6–12LiquidPetrol
12–24LiquidJet fuel, portable stove fuel
18–50High-boiling liquidDiesel, lubricants, heating oil
50 and aboveSolidPetroleum jelly, paraffin wax

Key takeaways: staggered ethane and anti butane are the most stable conformers. Alkanes burn to CO₂ and H₂O with much heat, chlorinate by a free radical chain (initiation, propagation, termination), aromatise over Cr₂O₃/Al₂O₃, give CO + H₂ with steam, crack on heating and isomerise with AlCl₃/HCl.

Check your understanding

  1. 1. In a Newman projection of ethane, each hydrogen on the back carbon lies exactly between two hydrogens on the front carbon (60° from each). This conformation is

    1. eclipsed, the least stable
    2. staggered, the most stable
    3. skew, the most stable
    4. eclipsed, the most stable
    Show answer

    Answer: B. Hydrogens set 60° apart, as far from each other as possible, describe the staggered conformation. Repulsion between the C–H bonds is least, so it is the most stable; the eclipsed form is about 12.5 kJ mol⁻¹ higher.

  2. 2. How many moles of O₂ are needed to burn one mole of butane, C₄H₁₀, completely?

    1. 4
    2. 5
    3. 6.5
    4. 13
    Show answer

    Answer: C. C₄H₁₀ + (3n + 1)/2 O₂ with n = 4 gives 13/2 = 6.5 O₂: C₄H₁₀ + 6.5O₂ → 4CO₂ + 5H₂O. Check O: 13 = 8 + 5. (Doubled: 2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O.)

  3. 3. In the chlorination of methane, which step is a chain-propagation step?

    1. Cl₂ → 2Cl•
    2. Cl• + Cl• → Cl₂
    3. •CH₃ + •CH₃ → C₂H₆
    4. Cl• + CH₄ → •CH₃ + HCl
    Show answer

    Answer: D. A propagation step uses one radical and makes another, keeping the chain going. Cl• + CH₄ → •CH₃ + HCl does exactly that. Splitting Cl₂ is initiation; radicals joining are termination.

  4. 4. n-Hexane passed over Cr₂O₃/Al₂O₃ at 873 K gives

    1. cyclohexane only
    2. benzene and hydrogen
    3. hexene and water
    4. carbon monoxide and hydrogen
    Show answer

    Answer: B. This is aromatisation: the chain closes into a ring and loses hydrogen, C₆H₁₄ → C₆H₆ + 4H₂. Check H: 14 = 6 + 8.

  5. 5. Which conformer of n-butane is the most stable?

    1. Fully eclipsed
    2. Gauche
    3. Anti
    4. Eclipsed at 120°
    Show answer

    Answer: C. In the anti conformer the two methyl groups are 180° apart, so the repulsion between the bulky groups is least. Gauche has the methyls 60° apart; the eclipsed forms put groups directly in line.

Privacy · Terms · Refunds · Delivery