Revision notes

Unit 13 Hydrocarbons: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Classification of hydrocarbons and the preparation of alkanes

Hydrocarbons

  • Aliphatic, open-chain (acyclic)
    • Alkanes, saturated: ethane
    • Alkenes, unsaturated (C=C): ethene
    • Alkynes, unsaturated (C≡C): ethyne
  • Aliphatic, cyclic
    • Cycloalkanes: cyclobutane
    • Cycloalkenes: cyclobutene
    • Cycloalkynes
  • Aromatic (arenes)
    • Contain the benzene ring or its derivatives
    • Example: benzene, toluene
Methods of preparing alkanes
MethodReagentsExample
Catalytic hydrogenationH₂ with Pt or Pd; with Ni this is the Sabatier–Senderens reactionCH₂=CH₂ + H₂ → CH₃–CH₃; CH₃C≡CH + 2H₂ → CH₃CH₂CH₃
DecarboxylationSodium salt of the acid heated with soda lime (NaOH + CaO); one carbon fewerCH₃COONa + NaOH → CH₄ + Na₂CO₃
Kolbe's electrolytic methodElectrolysis of Na or K salt of the acid; gives symmetrical alkanes R–R2CH₃COONa + 2H₂O → C₂H₆ + 2CO₂ (anode) + H₂ + 2NaOH (cathode)
Reduction of alkyl halidesNascent hydrogen from Zn + HCl, Zn + CH₃COOH, Zn–Cu couple in ethanol, or LiAlH₄ (not alkyl fluorides)CH₃CH₂CH₂Cl + 2[H] → CH₃CH₂CH₃ + HCl
Wurtz reactionAlkyl halide + sodium in dry ether; best for even-carbon alkanes2CH₃Br + 2Na → CH₃–CH₃ + 2NaBr
Corey–House methodAlkyl halide + lithium dialkylcuprateCH₃CH₂Br + (CH₃)₂CuLi → CH₃CH₂CH₃ + CH₃Cu + LiBr
From Grignard reagentsRMgX (made from R–X + Mg in dry ether) + water or any compound with replaceable HCH₃MgCl + H₂O → CH₄ + Mg(OH)Cl

Soda lime removes one carbon (RCOONa → RH). Kolbe and Wurtz double the alkyl group (→ R–R).

— Carbon counting in alkane preparations

Key takeaways: alkanes are CₙH₂ₙ₊₂ and show chain isomerism from C₄. Hydrogenation keeps the carbon count, soda lime removes one carbon, Kolbe and Wurtz double the alkyl group. Boiling point rises with chain length and falls with branching.

Read the full lesson

Lesson 2

Conformations and chemical reactions of alkanes

Rotating about C2–C3 in n-butane (stability shown in brackets)

  1. Anti, 180° Most stable: methyls farthest apart
  2. Eclipsed, 120° CH₃ in line with H: less stable
  3. Gauche, 60° Staggered, methyls close: fairly stable
  4. Fully eclipsed, 0° CH₃ behind CH₃: least stable

Free radical chlorination of methane

  1. Initiation UV light: Cl–Cl → 2Cl• (the Cl–Cl bond is weaker than C–H)
  2. Propagation (a) Cl• + CH₄ → •CH₃ + HCl
  3. Propagation (b) •CH₃ + Cl₂ → CH₃Cl + Cl•; the Cl• returns to step (a)
  4. Termination Cl• + Cl• → Cl₂; •CH₃ + •CH₃ → C₂H₆; •CH₃ + Cl• → CH₃Cl
Uses of alkanes by chain length (from the textbook's table)
Carbon atomsStateMain uses
1–4GasHeating and cooking fuel (natural gas, LPG)
5–7Low-boiling liquidSolvents, petrol (gasoline)
6–12LiquidPetrol
12–24LiquidJet fuel, portable stove fuel
18–50High-boiling liquidDiesel, lubricants, heating oil
50 and aboveSolidPetroleum jelly, paraffin wax

Key takeaways: staggered ethane and anti butane are the most stable conformers. Alkanes burn to CO₂ and H₂O with much heat, chlorinate by a free radical chain (initiation, propagation, termination), aromatise over Cr₂O₃/Al₂O₃, give CO + H₂ with steam, crack on heating and isomerise with AlCl₃/HCl.

Read the full lesson

Lesson 3

Alkenes: isomerism, preparation and addition reactions

When an unsymmetrical reagent HX adds to an unsymmetrical alkene, the hydrogen goes to the doubly bonded carbon that already has more hydrogens; the negative part X goes to the carbon with fewer hydrogens.

— Markovnikov's rule

Free radical addition of HBr to propene (peroxide present)

  1. Peroxide splits (C₆H₅COO)₂ → 2C₆H₅COO• → 2C₆H₅• + 2CO₂
  2. Bromine radical forms C₆H₅• + HBr → C₆H₆ + Br•
  3. Br• adds to C1 Gives the more stable secondary radical CH₃–C•H–CH₂Br
  4. Radical takes H from HBr CH₃CH₂CH₂Br forms and Br• is regenerated

Key takeaways: alkenes are CₙH₂ₙ and show position, chain and cis–trans isomerism. They add H₂, X₂, H₂O, HX and H₂SO₄. Ionic addition of HX follows Markovnikov's rule through the more stable carbocation (which may rearrange); HBr with peroxide adds the opposite way through the more stable radical.

Read the full lesson

Lesson 4

Oxidation, ozonolysis and polymerisation of alkenes, and the chemistry of alkynes

Ozonolysis: cut the C=C bond and put =O on each carbon. Reverse it: join the two C=O carbons with a double bond.

— Reading ozonolysis products
Preparing alkynes
MethodExample
From an alkene in two steps: add Br₂, then remove 2HBr (alcoholic KOH, then NaNH₂)CH₂=CH₂ → BrCH₂CH₂Br → CH₂=CHBr → HC≡CH
From a gem dihalide (two halogens on one carbon) with alcoholic KOHCH₃CH₂CHCl₂ → CH₃CH=CHCl → CH₃C≡CH (1,1-dichloropropane to propyne)
Kolbe electrolysis of potassium maleate or fumarate⁻OOC–CH=CH–COO⁻ → HC≡CH + 2CO₂ + 2e⁻ at the anode
Industrial: calcium carbide and waterCaO + 3C → CaC₂ + CO (electric furnace, 3273 K); CaC₂ + 2H₂O → HC≡CH + Ca(OH)₂

Key takeaways: Baeyer's reagent gives diols, acidified KMnO₄ and ozone cleave the double bond, and ozonolysis products reveal its position. Alkynes (CₙH₂ₙ₋₂) add two molecules of H₂, X₂ or HX; hydration gives aldehydes or ketones; terminal ≡C–H is acidic because sp carbon has 50% s character; ethyne trimerises to benzene.

Read the full lesson

Lesson 5

Aromatic hydrocarbons: benzene, aromaticity and electrophilic substitution

A ring is aromatic if it is planar, its π electrons are completely delocalised round the ring, and it has (4n + 2) π electrons, n = 0, 1, 2 ...

— Hückel's rule
Applying Hückel's rule
SpeciesPlanar and fully delocalised?π electronsAromatic?
BenzeneYes6 = 4(1) + 2Yes, n = 1
Cyclopentadienyl anionYes6 (two π bonds + lone pair)Yes, n = 1
FuranYes6 (two π bonds + one O lone pair)Yes, n = 1
Cyclopropenyl cationYes2 = 4(0) + 2Yes, n = 0
CyclopentadieneNo: the CH₂ carbon is sp³ and breaks the delocalisation4No
CyclooctatetraeneNo: the ring is non-planar (tub shaped)8No
Electrophilic substitution reactions of benzene
ReactionReagentsElectrophileProduct
NitrationConc. HNO₃ + conc. H₂SO₄, 330 KNO₂⁺Nitrobenzene + H₂O
HalogenationCl₂ or Br₂ with FeCl₃, FeBr₃ or AlCl₃Cl⁺ or Br⁺Chlorobenzene or bromobenzene + HX
SulphonationFuming H₂SO₄ (conc. H₂SO₄ + SO₃); reversibleSO₃ (neutral, sulphur short of an octet)Benzenesulphonic acid
Friedel–Crafts alkylationCH₃Cl + anhydrous AlCl₃CH₃⁺Toluene + HCl
Friedel–Crafts acylationCH₃COCl + anhydrous AlCl₃CH₃CO⁺Acetophenone + HCl

Mechanism of aromatic electrophilic substitution

  1. 1. Electrophile forms E–Nu + catalyst → E⁺ + Nu–catalyst, e.g. HNO₃ + 2H₂SO₄ → NO₂⁺ + H₃O⁺ + 2HSO₄⁻
  2. 2. E⁺ attacks the ring A carbocation (arenium ion) forms, stabilised by resonance over three carbons; slow step
  3. 3. H⁺ is lost The base removes H⁺ from the carbon bearing E; the aromatic ring is restored

Ortho–para directors and meta directors

  • Ortho–para directors
    • Activating: –OH, –NH₂, –NHR, –NHCOCH₃, –OCH₃, –CH₃, –C₂H₅
    • Lone pair (or +I/hyperconjugation) feeds electrons into the ring
    • Resonance puts negative charge at ortho and para
    • Halogens: o,p-directing but deactivating (strong −I, weaker +M)
  • Meta directors
    • Deactivating: –NO₂, –CN, –CHO, –COR, –COOH, –COOR, –SO₃H
    • Withdraw electrons by −I and −M
    • Resonance puts positive charge at ortho and para
    • Meta is the least electron-poor, so attack goes there

Key takeaways: aromatic = planar, fully delocalised, 4n + 2 π electrons. Benzene's six equal 1.40 Å bonds and delocalised π cloud explain why it substitutes rather than adds. Electrophilic substitution goes electrophile → arenium ion → loss of H⁺. Electron-releasing groups direct ortho–para and activate; electron-withdrawing groups direct meta and deactivate; halogens are the o,p-directing deactivators.

Read the full lesson

Privacy · Terms · Refunds · Delivery