• Practice
  • About 30 min
  • 15 practice questions

Final self-assessment: Haloalkanes and Haloarenes

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before looking at any answer, then work through every explanation. Some questions link reactions from different lessons.

Final self-assessment

  1. 1. Which of these is a vinylic halide?

    1. CH₂=CH–CH₂Br
    2. CH₃–CH=CBr–CH₃
    3. C₆H₅CH₂Br
    4. CH₃CH₂CH₂Br
    Show answer

    Answer: B. In CH₃–CH=CBr–CH₃ the bromine is on a carbon of the C=C double bond (sp²), which defines a vinylic halide. CH₂=CHCH₂Br is allylic, C₆H₅CH₂Br benzylic and CH₃CH₂CH₂Br an ordinary 1° alkyl halide.

  2. 2. Arrange the C–X bond enthalpies in CH₃X in increasing order.

    1. C–F < C–Cl < C–Br < C–I
    2. C–I < C–Br < C–Cl < C–F
    3. C–Cl < C–F < C–I < C–Br
    4. C–Br < C–I < C–Cl < C–F
    Show answer

    Answer: B. Bond enthalpy falls as the halogen gets bigger: 234 (C–I) < 293 (C–Br) < 351 (C–Cl) < 452 (C–F) kJ mol⁻¹.

  3. 3. What is the IUPAC name of CH₃CH₂C(CH₃)₂Cl?

    1. 2-Chloro-2-methylbutane
    2. 3-Chloro-3-methylbutane
    3. 2-Chloropentane
    4. tert-Pentyl chloride
    Show answer

    Answer: A. The longest chain has four carbons. Numbering from the end nearer the substituents puts both Cl and CH₃ on C2. So the name is 2-chloro-2-methylbutane (tert-pentyl chloride is a common name, not IUPAC).

  4. 4. Which isomer of C₄H₉Br has the lowest boiling point?

    1. 1-Bromobutane
    2. 2-Bromobutane
    3. 1-Bromo-2-methylpropane
    4. 2-Bromo-2-methylpropane
    Show answer

    Answer: D. All four have the same molar mass, so shape decides. 2-Bromo-2-methylpropane is the most branched and most nearly spherical, so it has the least surface contact and the weakest van der Waals forces.

  5. 5. Bromoethane is heated with silver fluoride, AgF. The organic product and the name of the reaction are

    1. fluoroethane, Swarts reaction
    2. iodoethane, Finkelstein reaction
    3. ethene, elimination
    4. ethanol, hydrolysis
    Show answer

    Answer: A. A metal fluoride such as AgF, SbF₃ or Hg₂F₂ exchanges Br for F: CH₃CH₂Br + AgF → CH₃CH₂F + AgBr. This halogen exchange that makes fluoroalkanes is the Swarts reaction.

  6. 6. Bromoethane reacts with alcoholic KCN and, separately, with alcoholic AgCN. The two products are

    1. both ethyl cyanide
    2. ethyl cyanide and ethyl isocyanide respectively
    3. ethyl isocyanide and ethyl cyanide respectively
    4. both ethyl isocyanide
    Show answer

    Answer: B. Cyanide is ambident. KCN gives free CN⁻, which bonds through carbon to give CH₃CH₂CN. With AgCN the carbon is tied up with silver, so attack is through nitrogen, giving CH₃CH₂NC.

  7. 7. An SN1 reaction of an optically active tertiary bromide gives an optically inactive product mainly because

    1. the nucleophile attacks from the back side only
    2. the planar carbocation is attacked equally from both faces, giving a racemic mixture
    3. the reaction is second order
    4. bromide ion attacks the product
    Show answer

    Answer: B. The sp² carbocation has two equivalent faces. Attack on each gives one of the two mirror-image products in equal amounts, and their rotations cancel. Back-side attack only would cause inversion, which is SN2.

  8. 8. For an SN1 reaction, rate = k[RX]. When [RX] is doubled and [OH⁻] is halved, the rate

    1. doubles
    2. stays the same
    3. halves
    4. becomes four times
    Show answer

    Answer: A. The nucleophile does not appear in the rate law, so halving [OH⁻] has no effect. Doubling [RX] doubles the rate.

  9. 9. Which haloalkane reacts fastest with OH⁻ by SN2?

    1. (CH₃)₃CBr
    2. (CH₃)₂CHBr
    3. CH₃CH₂Br
    4. CH₃Br
    Show answer

    Answer: D. SN2 needs the nucleophile to reach the back of the carbon. Methyl bromide has only small hydrogens around the carbon, so it is least hindered and fastest; the order is CH₃X > 1° > 2° > 3°.

  10. 10. 3-Bromo-2-methylpentane, (CH₃)₂CH–CHBr–CH₂CH₃, is heated with alcoholic KOH. The major alkene is

    1. 2-methylpent-2-ene
    2. 4-methylpent-2-ene
    3. 2-methylpent-1-ene
    4. 4-methylpent-1-ene
    Show answer

    Answer: A. The β-carbons are C2 and C4. Losing H from C2 gives (CH₃)₂C=CH–CH₂CH₃, with three alkyl groups on the C=C. Losing H from C4 gives (CH₃)₂CH–CH=CH–CH₃ (4-methylpent-2-ene), with two. By Saytzeff's rule the more substituted 2-methylpent-2-ene is major.

  11. 11. Which combination, followed by hydrolysis, gives butan-2-ol, CH₃CH(OH)CH₂CH₃?

    1. HCHO + CH₃CH₂CH₂MgBr
    2. CH₃CHO + CH₃CH₂MgBr
    3. CH₃COCH₃ + CH₃MgI
    4. CO₂ + CH₃CH₂CH₂MgBr
    Show answer

    Answer: B. Butan-2-ol is a secondary alcohol whose carbinol carbon carries CH₃ and C₂H₅. Acetaldehyde supplies CH₃ and the H; ethylmagnesium bromide adds C₂H₅. HCHO would give butan-1-ol, acetone tert-butyl alcohol and CO₂ butanoic acid.

  12. 12. Which pair of reactants gives ethyl propanoate, CH₃CH₂COOC₂H₅, after the usual work-up?

    1. CH₃MgI + ClCOOC₂H₅
    2. CH₃CH₂MgBr + CO₂
    3. CH₃CH₂MgBr + ClCOOC₂H₅
    4. CH₃CH₂MgBr + HCOOC₂H₅
    Show answer

    Answer: C. Ethyl chloroformate converts a Grignard reagent into an ester: the R group replaces Cl. Ethylmagnesium bromide therefore gives C₂H₅–COOC₂H₅, ethyl propanoate. CH₃MgI would give ethyl acetate, CO₂ gives propanoic acid and ethyl formate gives propanal.

  13. 13. Chlorobenzene is sulphonated with fuming sulphuric acid. The major product is

    1. 2-chlorobenzenesulphonic acid
    2. 3-chlorobenzenesulphonic acid
    3. benzenesulphonic acid
    4. 4-chlorobenzenesulphonic acid
    Show answer

    Answer: D. Chlorine is an o,p-director (its lone pair raises electron density at ortho and para by resonance). The para product is major because the ortho positions are more crowded next to chlorine.

  14. 14. Benzenediazonium chloride is treated with HBF₄ and the solid formed is heated. This gives

    1. fluorobenzene, Balz–Schiemann reaction
    2. chlorobenzene, Sandmeyer reaction
    3. iodobenzene
    4. phenol, Dow's process
    Show answer

    Answer: A. HBF₄ gives benzenediazonium fluoroborate, C₆H₅N₂BF₄, which on heating decomposes: C₆H₅N₂BF₄ → C₆H₅F + BF₃ + N₂. This route to fluorobenzene is the Balz–Schiemann reaction.

  15. 15. Which reaction produces the poisonous gas phosgene?

    1. CHCl₃ + HNO₃
    2. CCl₄ heated with steam
    3. CHCl₃ + CH₃NH₂ + KOH
    4. CS₂ + Cl₂ with AlCl₃
    Show answer

    Answer: B. CCl₄ + H₂O (hot) → COCl₂ + 2HCl. Chloroform with nitric acid gives chloropicrin, the carbylamine reaction gives methyl isocyanide, and CS₂ with chlorine gives CCl₄ and S₂Cl₂.

Revisit the lessons for any question you missed. Questions 1-3: lesson 1 (classification, names, C–X bond). Questions 4-5: lesson 2 (preparation and physical properties). Questions 6-9: lesson 3 (nucleophilic substitution, SN1 and SN2). Questions 10-12: lesson 4 (elimination and Grignard reagents). Questions 13-15: lesson 5 (haloarenes and polyhalogen compounds).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery