Revision notes

Unit 6 Gaseous State: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Pressure, Boyle's law and Charles' law

Common units of pressure
UnitSymbolValue in pascal
atmosphereatm1 atm = 101325 Pa
barbar1 bar = 10⁵ Pa
millimetre of mercurymmHg1 mmHg = 133.322 Pa
torrTorr1 Torr = 133.322 Pa
pound per square inchpsi1 psi = 6894.76 Pa

Boyle's law: V ∝ 1/P, so PV = k and P₁V₁ = P₂V₂ (n and T constant).

Charles' law: V ∝ T, so V/T = constant and V₁/T₁ = V₂/T₂ (P and n constant, T in kelvin).

Boyle's law and Charles' law side by side

  • Boyle's law
    • Temperature and amount fixed
    • V ∝ 1/P
    • P₁V₁ = P₂V₂
    • Double the pressure: half the volume
    • Graph of P against V is a curve
  • Charles' law
    • Pressure and amount fixed
    • V ∝ T (kelvin)
    • V₁/T₁ = V₂/T₂
    • Double the kelvin temperature: double the volume
    • Graph of V against T is a straight line through 0 K

Key takeaways: 1 atm = 101325 Pa = 760 mmHg; 1 bar = 10⁵ Pa. Boyle: PV constant at fixed T, and density ∝ pressure. Charles: V/T constant at fixed P, with T always in kelvin; absolute zero is −273.15 °C.

Read the full lesson

Lesson 2

Gay-Lussac's law, Avogadro's hypothesis and the ideal gas equation

PV = nRT — the ideal gas equation (equation of state). For a fixed amount of gas: P₁V₁/T₁ = P₂V₂/T₂ (combined gas law).

Laws that combine into PV = nRT

  • Boyle's law
    • V ∝ 1/P
    • n and T fixed
  • Charles' law
    • V ∝ T
    • n and P fixed
  • Gay-Lussac's law
    • P ∝ T
    • n and V fixed
  • Avogadro's hypothesis
    • V ∝ n
    • T and P fixed

Key takeaways: P/T is constant at fixed V; V/n is constant at fixed T and P. Together the laws give PV = nRT with R = 0.0821 dm³ atm mol⁻¹ K⁻¹ = 8.314 J K⁻¹ mol⁻¹. From it, d = PM/RT. Always use kelvin.

Read the full lesson

Lesson 3

Dalton's law of partial pressures and Graham's law of diffusion

pᵢ = xᵢ × P(total), where xᵢ = nᵢ/n(total) and the mole fractions add up to 1.

Diffusion and effusion

  • Diffusion
    • One gas mixes into another gas
    • Molecules move from high to low concentration
    • Example: smell of perfume spreading
  • Effusion
    • Gas escapes through a tiny hole
    • Escapes into a vacuum or low pressure
    • Example: a balloon slowly going flat

Graham's law: r ∝ 1/√M, so r(A)/r(B) = √(M(B)/M(A)). For equal volumes, t(A)/t(B) = √(M(A)/M(B)). With different pressures: r(A)/r(B) = (P(A)/P(B)) × √(M(B)/M(A)).

Key takeaways: total pressure is the sum of partial pressures, and pᵢ = xᵢP(total). Subtract aqueous tension for a gas collected over water. Lighter gases diffuse and effuse faster: r ∝ 1/√M, while the time for equal volumes ∝ √M.

Read the full lesson

Lesson 4

Real gases: compressibility factor and the van der Waals equation

Van der Waals equation: (P + an²/V²)(V − nb) = nRT. For 1 mole: (P + a/V²)(V − b) = RT.

The two van der Waals corrections

  • Pressure correction (a)
    • Cause: attraction between molecules
    • Measured P is lower than ideal
    • Add an²/V² to P
    • Larger a means stronger attraction, easier to liquefy
    • Units of a: dm⁶ atm mol⁻² (atm L² mol⁻²)
  • Volume correction (b)
    • Cause: molecules have their own volume
    • Free volume is less than V
    • Subtract nb from V
    • b is four times the actual volume of a mole of molecules
    • Units of b: dm³ mol⁻¹ (L mol⁻¹)

Key takeaways: real gases deviate because molecules attract and occupy space. Z = PV/nRT measures the deviation (Z < 1 attraction wins, Z > 1 size wins); gases are nearly ideal at low P and high T. Van der Waals: add an²/V² to the pressure and subtract nb from the volume.

Read the full lesson

Lesson 5

Critical constants, Andrews' isotherms and liquefaction of gases

Critical constants of some gases (values from the Tamil Nadu textbook)
GasTc (K)Pc (atm)Vc (cm³ mol⁻¹)
Helium5.22.2657.8
Hydrogen33.212.8065
Nitrogen126.333.5490.1
Oxygen154.850.1478.0
Carbon dioxide304.272.994.0
Ammonia405.5111.372.5
Water647.4218.355.3

Vc = 3b, Pc = a/27b², Tc = 8a/27Rb; conversely a = 3PcVc² and b = Vc/3.

Ways to liquefy gases

  • Linde's method
    • Uses the Joule-Thomson effect repeatedly
    • Compressed gas expands through a valve and cools
    • The cooled gas pre-cools incoming gas until it liquefies
  • Claude's process
    • Gas also does mechanical work (drives a piston) as it expands
    • Doing work removes extra energy, so cooling is greater
  • Adiabatic demagnetisation
    • A magnetic salt such as gadolinium sulphate is magnetised, then the field is removed
    • Gives temperatures around 10⁻⁴ K, very close to absolute zero

Key takeaways: above Tc no pressure liquefies a gas; at the critical point liquid and gas become one. Vc = 3b, Pc = a/27b², Tc = 8a/27Rb. Gases cool on Joule-Thomson expansion only below Ti = 2a/Rb; H₂ and He must be pre-cooled. Linde uses the Joule-Thomson effect, Claude adds work, and adiabatic demagnetisation reaches near 0 K.

Read the full lesson

Privacy · Terms · Refunds · Delivery