• Practice
  • About 24 min
  • 5 practice questions

Gay-Lussac's law, Avogadro's hypothesis and the ideal gas equation

Relate pressure to temperature at constant volume, use Avogadro's hypothesis, combine the gas laws into PV = nRT, calculate R in different units and use the equation to find pressure, moles, density and molar mass.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State Gay-Lussac's law and Avogadro's hypothesis and use them in calculations.
  • Combine Boyle's, Charles' and Avogadro's laws into the ideal gas equation PV = nRT.
  • Calculate R in dm³ atm mol⁻¹ K⁻¹ and in J K⁻¹ mol⁻¹, and use the combined gas law P₁V₁/T₁ = P₂V₂/T₂.
  • Use PV = nRT to find moles, mass, density and molar mass of a gas.

Car tyres feel harder after a long drive in the sun, and an aerosol can carries a warning not to heat it. Both are examples of the pressure of a gas rising with temperature in a fixed volume.

Gay-Lussac's law: pressure and temperature

Joseph Gay-Lussac stated that at constant volume, the pressure of a fixed mass of gas is directly proportional to its kelvin temperature: P ∝ T, P/T = constant and P₁/T₁ = P₂/T₂. Lines of P against T at constant volume are called isochores. Hotter molecules move faster and hit the walls harder and more often, so the pressure rises.

Worked example 1: tyre pressure on a hot day

A tyre is filled to 2.0 atm at 27 °C. After driving, the air inside is at 57 °C; assume the volume does not change. Working: T₁ = 300 K, T₂ = 330 K. P₂ = P₁ × T₂/T₁ = 2.0 atm × 330/300 = 2.2 atm. This is why tyres are filled to a slightly lower pressure in summer.

Avogadro's hypothesis

Avogadro proposed that equal volumes of all gases at the same temperature and pressure contain equal numbers of molecules. So at fixed T and P, V ∝ n, and V₁/n₁ = V₂/n₂. One mole of any ideal gas occupies 22.414 dm³ at 273.15 K and 1 atm, and 22.71 dm³ at 273.15 K and 1 bar (the present standard, STP).

The ideal gas equation

Put the three laws together: V ∝ 1/P (Boyle), V ∝ T (Charles) and V ∝ n (Avogadro). Then V ∝ nT/P, or V = nRT/P, where R is the universal gas constant. Rearranged:

PV = nRT — the ideal gas equation (equation of state). For a fixed amount of gas: P₁V₁/T₁ = P₂V₂/T₂ (combined gas law).

Value of R. Using 1 mol at 1 atm, 22.414 dm³ and 273.15 K: R = PV/nT = (1 atm × 22.414 dm³) ÷ (1 mol × 273.15 K) = 0.0821 dm³ atm mol⁻¹ K⁻¹. Using 1 mol at 1 bar (10⁵ Pa), 22.71 × 10⁻³ m³ and 273.15 K: R = (10⁵ Pa × 22.71 × 10⁻³ m³) ÷ (1 mol × 273.15 K) = 8.314 Pa m³ K⁻¹ mol⁻¹ = 8.314 J K⁻¹ mol⁻¹ (since Pa m³ = N m = J) = 8.314 × 10⁻² bar dm³ K⁻¹ mol⁻¹. The number depends only on the units chosen for pressure and volume, not on the gas.

Laws that combine into PV = nRT

  • Boyle's law
    • V ∝ 1/P
    • n and T fixed
  • Charles' law
    • V ∝ T
    • n and P fixed
  • Gay-Lussac's law
    • P ∝ T
    • n and V fixed
  • Avogadro's hypothesis
    • V ∝ n
    • T and P fixed

Worked example 2: moles and mass of a gas

A 5.00 dm³ cylinder contains carbon dioxide at 2.00 atm and 300 K. How many moles and grams of CO₂ does it hold? (R = 0.0821 dm³ atm mol⁻¹ K⁻¹, C = 12, O = 16.) Working: n = PV/RT = (2.00 × 5.00) ÷ (0.0821 × 300) = 10.0 ÷ 24.63 = 0.406 mol. Mass = 0.406 mol × 44 g mol⁻¹ = 17.9 g.

Worked example 3: combined gas law

400 mL of a gas at 1.00 atm and 27 °C is changed to 2.00 atm and 127 °C. Find the new volume. Working: T₁ = 300 K, T₂ = 400 K. V₂ = V₁ × (P₁/P₂) × (T₂/T₁) = 400 mL × (1.00/2.00) × (400/300) = 400 × 0.5 × 1.333 = 267 mL. Doubling the pressure halves the volume, and heating from 300 K to 400 K enlarges it by a third.

Density and molar mass from PV = nRT

Since n = m/M, PV = (m/M)RT, so PM = (m/V)RT = dRT. This gives d = PM/RT and M = dRT/P. A gas is denser at high pressure, low temperature and high molar mass.

Worked example 4: density and molar mass

(a) Find the density of oxygen at 2.00 atm and 27 °C. Working: d = PM/RT = (2.00 × 32) ÷ (0.0821 × 300) = 64.0 ÷ 24.63 = 2.60 g dm⁻³. (b) A gas has density 1.25 g dm⁻³ at 273.15 K and 1 atm. Working: at these conditions 1 mol occupies 22.414 dm³, so M = 1.25 × 22.414 = 28.0 g mol⁻¹, which fits nitrogen or carbon monoxide.

Key takeaways: P/T is constant at fixed V; V/n is constant at fixed T and P. Together the laws give PV = nRT with R = 0.0821 dm³ atm mol⁻¹ K⁻¹ = 8.314 J K⁻¹ mol⁻¹. From it, d = PM/RT. Always use kelvin.

Check your understanding

  1. 1. A sealed bulb holds argon at 1.2 atm and 27 °C. It is heated to 177 °C at constant volume. What is the new pressure?

    1. 7.9 atm
    2. 0.80 atm
    3. 1.8 atm
    4. 1.2 atm
    Show answer

    Answer: C. T₁ = 300 K and T₂ = 450 K. P₂ = P₁ × T₂/T₁ = 1.2 × 450/300 = 1.8 atm. Using Celsius (1.2 × 177/27 = 7.9 atm) is the common error.

  2. 2. At the same temperature and pressure, 0.50 mol of a gas occupies 11.2 dm³. What volume does 1.75 mol of the same gas occupy?

    1. 39.2 dm³
    2. 3.2 dm³
    3. 22.4 dm³
    4. 19.6 dm³
    Show answer

    Answer: A. By Avogadro, V₁/n₁ = V₂/n₂, so V₂ = 11.2 × 1.75/0.50 = 11.2 × 3.5 = 39.2 dm³.

  3. 3. The value of the gas constant R depends on

    1. the temperature of the gas
    2. the nature of the gas
    3. the units used for pressure and volume
    4. the number of moles present
    Show answer

    Answer: C. R is a universal constant: it is the same for every gas at every temperature. Only its numerical value changes with the units, for example 0.0821 dm³ atm mol⁻¹ K⁻¹ or 8.314 J K⁻¹ mol⁻¹.

  4. 4. What pressure is exerted by 0.50 mol of an ideal gas in a 4.10 dm³ vessel at 400 K? (R = 0.0821 dm³ atm mol⁻¹ K⁻¹)

    1. 2.0 atm
    2. 4.0 atm
    3. 8.0 atm
    4. 0.25 atm
    Show answer

    Answer: B. P = nRT/V = (0.50 × 0.0821 × 400) ÷ 4.10 = 16.42 ÷ 4.10 = 4.0 atm.

  5. 5. A gas has density 2.86 g dm⁻³ at 273.15 K and 1 atm (molar volume 22.414 dm³). Which gas could it be?

    1. CO₂ (44 g mol⁻¹)
    2. NH₃ (17 g mol⁻¹)
    3. O₂ (32 g mol⁻¹)
    4. SO₂ (64 g mol⁻¹)
    Show answer

    Answer: D. M = d × molar volume = 2.86 × 22.414 = 64.1 g mol⁻¹, which matches sulphur dioxide (32 + 2 × 16 = 64 g mol⁻¹).

Privacy · Terms · Refunds · Delivery