• Practice
  • About 22 min
  • 5 practice questions

Pressure, Boyle's law and Charles' law

Convert between units of pressure, state and apply Boyle's law and its pressure-density form, and use Charles' law and the Kelvin scale to relate the volume of a gas to its temperature.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Tell a gas from a vapour and convert pressures between Pa, atm, bar, mmHg and torr.
  • State Boyle's law, explain it in terms of molecules and use P₁V₁ = P₂V₂ and P₁/d₁ = P₂/d₂.
  • State Charles' law, explain how it leads to absolute zero, and use V₁/T₁ = V₂/T₂ with T in kelvin.

We breathe air every few seconds, and air is a gas. Gases differ greatly in their chemistry, yet they behave in remarkably similar ways physically: they all expand when heated and shrink when squeezed. Only eleven elements are gases under ordinary conditions: H₂, N₂, O₂, F₂, Cl₂ and the six noble gases (He, Ne, Ar, Kr, Xe, Rn); compounds such as CO, CO₂, NO and NO₂ are gases too. A gas is a substance that is gaseous at room temperature and 1 atm, while a vapour is the gaseous form of something that is normally a liquid or solid (water vapour, iodine vapour).

Pressure and its units

Pressure is force divided by the area on which it acts. Its SI unit is the pascal, 1 Pa = 1 N m⁻² = 1 kg m⁻¹ s⁻². A gas exerts pressure because its molecules keep hitting the walls of the container.

Common units of pressure
UnitSymbolValue in pascal
atmosphereatm1 atm = 101325 Pa
barbar1 bar = 10⁵ Pa
millimetre of mercurymmHg1 mmHg = 133.322 Pa
torrTorr1 Torr = 133.322 Pa
pound per square inchpsi1 psi = 6894.76 Pa

Because 1 atm = 760 mmHg, a column of mercury 760 mm high balances the atmosphere at sea level.

Worked example 1: converting pressure

Express 750 mmHg in pascal and in atm. Working: 750 × 133.322 Pa = 99,991.5 Pa (about 1.00 × 10⁵ Pa, roughly 1 bar). In atm: 99,991.5 ÷ 101,325 = 0.987 atm, or directly 750 ÷ 760 = 0.987 atm.

Boyle's law: pressure and volume

Robert Boyle trapped air in the closed arm of a J-shaped tube with mercury. Pouring in more mercury raised the pressure on the air; when the level difference reached 760 mm (pressure 2 atm), the air's volume had halved. At constant temperature, the volume of a fixed mass of gas is inversely proportional to its pressure.

Boyle's law: V ∝ 1/P, so PV = k and P₁V₁ = P₂V₂ (n and T constant).

In terms of molecules: if the same gas is squeezed into half the volume, there are twice as many molecules in each unit of volume, so twice as many hit each unit area of wall every second, and the pressure doubles. A graph of P against V is a curve (a rectangular hyperbola); P against 1/V is a straight line through the origin; PV against P is a horizontal line.

Pressure and density. Since density d = m/V, V = m/d. Putting this in P₁V₁ = P₂V₂ for the same mass m gives P₁/d₁ = P₂/d₂: the density of a gas is directly proportional to its pressure. This is why air is thinner at high altitude, why aeroplane cabins are pressurised, and why ears hurt on a fast climb up a hill: the outside pressure drops while the air inside the ear is still at the old pressure.

Worked example 2: compressing a gas

A gas occupies 2.50 dm³ at 1.20 atm. At the same temperature the pressure is lowered to 0.800 atm. Find the new volume. Working: P₁V₁ = P₂V₂, so V₂ = P₁V₁/P₂ = (1.20 atm × 2.50 dm³) ÷ 0.800 atm = 3.00 ÷ 0.800 = 3.75 dm³. The pressure fell, so the volume rose, as expected.

Charles' law: volume and temperature

J. A. C. Charles found that, at constant pressure, the volume of a fixed mass of gas increases in a straight line as it is heated. A balloon moved from ice-cold water into boiling water swells, because its molecules move faster. Charles and Gay-Lussac found that every gas expands by the same fraction, about 1/273 of its volume at 0 °C for each 1 °C rise: V = V₀(1 + t/273), with t in °C.

If the straight lines of V against t (called isobars, lines at constant pressure) are extended backwards, they all meet the temperature axis at −273.15 °C, where the volume would become zero. A volume below zero is impossible, so this is the lowest possible temperature, absolute zero. Kelvin built a scale starting there: T (K) = t (°C) + 273.15. Water freezes at 273.15 K and boils at 373.15 K. On the Kelvin scale the law becomes very simple.

Charles' law: V ∝ T, so V/T = constant and V₁/T₁ = V₂/T₂ (P and n constant, T in kelvin).

Boyle's law and Charles' law side by side

  • Boyle's law
    • Temperature and amount fixed
    • V ∝ 1/P
    • P₁V₁ = P₂V₂
    • Double the pressure: half the volume
    • Graph of P against V is a curve
  • Charles' law
    • Pressure and amount fixed
    • V ∝ T (kelvin)
    • V₁/T₁ = V₂/T₂
    • Double the kelvin temperature: double the volume
    • Graph of V against T is a straight line through 0 K

Worked example 3: heating a gas at constant pressure

A syringe holds 500 cm³ of air at 27 °C. It is warmed to 87 °C at constant pressure. Find the new volume. Working: convert to kelvin first: T₁ = 27 + 273 = 300 K, T₂ = 87 + 273 = 360 K. V₂ = V₁ × T₂/T₁ = 500 cm³ × 360/300 = 600 cm³. A common mistake is to use °C: 500 × 87/27 would give 1611 cm³, which is wrong.

Key takeaways: 1 atm = 101325 Pa = 760 mmHg; 1 bar = 10⁵ Pa. Boyle: PV constant at fixed T, and density ∝ pressure. Charles: V/T constant at fixed P, with T always in kelvin; absolute zero is −273.15 °C.

Check your understanding

  1. 1. What is 2.00 bar expressed in atm?

    1. 2.026 atm
    2. 1.974 atm
    3. 2.000 atm
    4. 1.520 atm
    Show answer

    Answer: B. 2.00 bar = 2.00 × 10⁵ Pa. Dividing by 101325 Pa per atm: 200000 ÷ 101325 = 1.974 atm. A bar is slightly smaller than an atmosphere, so the number in atm is slightly smaller.

  2. 2. At constant temperature, a gas at 1.0 atm occupies 6.0 dm³. What pressure will make it occupy 1.5 dm³?

    1. 0.25 atm
    2. 1.5 atm
    3. 4.0 atm
    4. 9.0 atm
    Show answer

    Answer: C. P₂ = P₁V₁/V₂ = (1.0 atm × 6.0 dm³) ÷ 1.5 dm³ = 4.0 atm. The volume became one quarter, so the pressure must be four times larger.

  3. 3. The density of a gas is 1.6 g dm⁻³ at 2.0 atm. At the same temperature, what is its density at 5.0 atm?

    1. 4.0 g dm⁻³
    2. 0.64 g dm⁻³
    3. 3.2 g dm⁻³
    4. 8.0 g dm⁻³
    Show answer

    Answer: A. From Boyle's law, P₁/d₁ = P₂/d₂, so d₂ = d₁ × P₂/P₁ = 1.6 × 5.0/2.0 = 4.0 g dm⁻³. Density rises in proportion to pressure.

  4. 4. A gas occupies 300 cm³ at 0 °C. At constant pressure, at what temperature will it occupy 600 cm³?

    1. 0 °C
    2. 546 °C
    3. 273 °C
    4. 600 °C
    Show answer

    Answer: C. T₁ = 273 K. V₂/V₁ = 2, so T₂ = 2 × 273 K = 546 K, which is 546 − 273 = 273 °C. The answer 546 °C forgets to change the kelvin result back to Celsius.

  5. 5. Why must kelvin, not degrees Celsius, be used in Charles' law?

    1. Kelvin values are always larger numbers.
    2. Volume is proportional to the temperature measured from absolute zero, and only the Kelvin scale starts there.
    3. The Celsius scale has larger degrees than the Kelvin scale.
    4. Gases do not expand on the Celsius scale.
    Show answer

    Answer: B. The straight line of V against temperature passes through zero volume at absolute zero (−273.15 °C), which is 0 K. So V ∝ T only when T is counted from absolute zero. The size of one degree is the same on both scales.

Privacy · Terms · Refunds · Delivery