- Practice
- About 22 min
- 5 practice questions
Dalton's law of partial pressures and Graham's law of diffusion
Calculate partial pressures from mole fractions, correct the pressure of a gas collected over water for aqueous tension, tell diffusion from effusion, and use Graham's law to compare rates and find molar masses.
If something looks wrong, please tell us.
By the end of this lesson you can
- State Dalton's law of partial pressures and derive pᵢ = xᵢP(total).
- Find the pressure of a dry gas collected over water using aqueous tension.
- Tell diffusion from effusion and state Graham's law.
- Use Graham's law to compare rates, times and molar masses.
Air is a mixture, roughly 78% nitrogen, 21% oxygen and 1% other gases by volume. How much of the total pressure does each gas contribute, and why does the smell of a perfume spread across a room? This lesson answers both.
Dalton's law of partial pressures
In a mixture of gases that do not react, each gas behaves as if the others were not there. The partial pressure of a gas is the pressure it would exert if it alone filled the whole container at the same temperature. John Dalton stated: the total pressure of a mixture of non-reacting gases is the sum of the partial pressures of its components, P(total) = p₁ + p₂ + p₃ + ....
For ideal gases, p₁ = n₁RT/V, p₂ = n₂RT/V and p₃ = n₃RT/V, so P(total) = (n₁ + n₂ + n₃)RT/V = n(total)RT/V. Dividing p₁ by P(total) cancels RT/V: p₁/P(total) = n₁/n(total) = x₁, the mole fraction. So each partial pressure is the mole fraction times the total pressure.
pᵢ = xᵢ × P(total), where xᵢ = nᵢ/n(total) and the mole fractions add up to 1.
Worked example 1: a mixture of oxygen and hydrogen
A vessel contains 8.0 g of O₂ and 1.0 g of H₂ at a total pressure of 3.0 atm. Find each partial pressure. Working: n(O₂) = 8.0 ÷ 32 = 0.25 mol; n(H₂) = 1.0 ÷ 2 = 0.50 mol; total = 0.75 mol. x(O₂) = 0.25/0.75 = 0.333, x(H₂) = 0.50/0.75 = 0.667. p(O₂) = 0.333 × 3.0 = 1.0 atm; p(H₂) = 0.667 × 3.0 = 2.0 atm. Check: 1.0 + 2.0 = 3.0 atm. Hydrogen has the smaller mass but the larger share of pressure, because pressure follows moles, not grams.
Gases collected over water
A gas collected by downward displacement of water is mixed with water vapour. The vapour pressure of water at that temperature is called aqueous tension, and its values are listed in tables. By Dalton's law: p(dry gas) = P(total) − p(water vapour).
Worked example 2: correcting for aqueous tension
Hydrogen is collected over water at 25 °C; the total pressure inside the jar is 760.0 mmHg. Take the aqueous tension at 25 °C as 23.8 mmHg. Working: p(H₂) = 760.0 − 23.8 = 736.2 mmHg, which is 736.2 ÷ 760 = 0.969 atm. This is the value to use in PV = nRT for the hydrogen alone.
Diffusion and effusion
Gases spread to fill all the space available. Diffusion is the movement of gas molecules through another gas, from a region of higher concentration to one of lower concentration: perfume spreading through a room. Effusion is the escape of a gas through a very tiny hole into a vacuum: air slowly leaking out of a balloon.
Diffusion and effusion
-
Diffusion
- One gas mixes into another gas
- Molecules move from high to low concentration
- Example: smell of perfume spreading
-
Effusion
- Gas escapes through a tiny hole
- Escapes into a vacuum or low pressure
- Example: a balloon slowly going flat
Graham's law
Thomas Graham found that the rate of diffusion or effusion of a gas is inversely proportional to the square root of its molar mass (at the same temperature and pressure). Light molecules move faster on average, so they spread and escape faster. If the pressures differ, the rate is also proportional to pressure. Graham's law is the basis of separating uranium-235 from the heavier uranium-238 as gaseous hexafluorides.
Graham's law: r ∝ 1/√M, so r(A)/r(B) = √(M(B)/M(A)). For equal volumes, t(A)/t(B) = √(M(A)/M(B)). With different pressures: r(A)/r(B) = (P(A)/P(B)) × √(M(B)/M(A)).
Worked example 3: hydrogen and oxygen
How much faster does hydrogen diffuse than oxygen? Working: r(H₂)/r(O₂) = √(M(O₂)/M(H₂)) = √(32/2) = √16 = 4. Hydrogen diffuses four times as fast. It also explains why a ring of NH₄Cl forms nearer the HCl end of a tube when NH₃ (17 g mol⁻¹) and HCl (36.5 g mol⁻¹) diffuse towards each other: the lighter ammonia travels further in the same time.
Worked example 4: molar mass from effusion times
A volume of oxygen effuses through a pinhole in 30 s; the same volume of an unknown gas takes 60 s under the same conditions. Find the molar mass. Working: the time taken is proportional to √M, so t(X)/t(O₂) = √(M(X)/32). 60/30 = 2 = √(M(X)/32). Squaring: 4 = M(X)/32, so M(X) = 128 g mol⁻¹ (hydrogen iodide, HI, is close to this).
Key takeaways: total pressure is the sum of partial pressures, and pᵢ = xᵢP(total). Subtract aqueous tension for a gas collected over water. Lighter gases diffuse and effuse faster: r ∝ 1/√M, while the time for equal volumes ∝ √M.
Check your understanding
-
1. A mixture contains 2.0 mol N₂, 0.50 mol O₂ and 0.50 mol Ar at a total pressure of 1.5 atm. What is the partial pressure of N₂?
- 0.50 atm
- 1.0 atm
- 1.5 atm
- 0.75 atm
Show answer
Answer: B. Total moles = 2.0 + 0.50 + 0.50 = 3.0 mol. x(N₂) = 2.0/3.0 = 0.667. p(N₂) = 0.667 × 1.5 = 1.0 atm.
-
2. Equal masses of methane (CH₄) and oxygen are mixed in a container. What fraction of the total pressure is due to oxygen?
- 1/2
- 2/3
- 1/4
- 1/3
Show answer
Answer: D. Take m grams of each: n(CH₄) = m/16 and n(O₂) = m/32. x(O₂) = (m/32) ÷ (m/16 + m/32) = (1/32) ÷ (3/32) = 1/3. Methane has half the molar mass, so it has twice the moles.
-
3. Oxygen is collected over water at a total pressure of 750 mmHg; the aqueous tension is 25 mmHg. What is the pressure of dry oxygen?
- 725 mmHg
- 775 mmHg
- 750 mmHg
- 30 mmHg
Show answer
Answer: A. The jar contains oxygen and water vapour. By Dalton's law, p(O₂) = P(total) − p(water) = 750 − 25 = 725 mmHg.
-
4. An unknown gas diffuses at one quarter of the rate of helium (4 g mol⁻¹) under the same conditions. What is its molar mass?
- 16 g mol⁻¹
- 64 g mol⁻¹
- 8 g mol⁻¹
- 1 g mol⁻¹
Show answer
Answer: B. r(X)/r(He) = √(M(He)/M(X)), so 1/4 = √(4/M(X)). Squaring: 1/16 = 4/M(X), so M(X) = 64 g mol⁻¹. Forgetting to square gives 16 g mol⁻¹.
-
5. Which statement correctly describes effusion?
- The mixing of two gases in the same container
- The escape of a gas through a tiny hole into a region of low pressure
- The change of a gas into a liquid on cooling
- The rise of pressure when a gas is heated
Show answer
Answer: B. Effusion is escape through a very small opening into a vacuum or low pressure. Mixing of gases with each other is diffusion; both follow Graham's law.
Sign in to keep track of the lessons you finish.