• Practice
  • About 26 min
  • 5 practice questions

Colligative properties: lowering of vapour pressure, boiling point and freezing point

Explain colligative properties and use relative lowering of vapour pressure, ΔTb = Kb m and ΔTf = Kf m to calculate changes and to find the molar mass of a solute.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State what a colligative property is and name the four.
  • Find the molar mass of a solute from the relative lowering of vapour pressure.
  • Explain elevation of boiling point and depression of freezing point and use ΔTb = Kb m and ΔTf = Kf m.
  • Find the molar mass of a solute from ΔTb or ΔTf.

Sugar makes water sweet and salt makes it salty: some properties depend on what the solute is. But for an ideal, dilute solution four properties depend only on the number of solute particles (molecules or ions), not on their kind: relative lowering of vapour pressure, elevation of boiling point, depression of freezing point and osmotic pressure. These are colligative properties (osmotic pressure is in lesson 5).

Relative lowering of vapour pressure

Why does a non-volatile solute lower vapour pressure? At equilibrium the molar Gibbs energy of the solvent is the same in liquid and vapour. Dissolving a solute raises the entropy of the liquid and lowers its Gibbs energy. To restore equality the vapour's Gibbs energy must fall too, and at fixed temperature the only way is a lower vapour pressure. Since (p° − p)/p° = x_B depends only on the mole fraction of solute, it is colligative.

For a dilute solution n_A ≫ n_B, so x_B = n_B/(n_A + n_B) ≈ n_B/n_A = (w_B/M_B) ÷ (w_A/M_A).

(p° − p)/p° = (w_B × M_A)/(M_B × w_A), so M_B = (w_B × M_A × p°)/(w_A × Δp).

— Molar mass from lowering of vapour pressure

Worked example 1: molar mass from vapour pressure

2.0 g of a non-volatile solute in 39 g of a solvent (M_A = 78 g mol⁻¹) lowers the vapour pressure from 100.0 to 98.0 torr (practice data). Working: Δp/p° = 2.0 ÷ 100.0 = 0.020. M_B = (w_B × M_A)/(w_A × Δp/p°) = (2.0 × 78) ÷ (39 × 0.020) = 156 ÷ 0.78 = 200 g mol⁻¹.

Elevation of boiling point

A liquid boils when its vapour pressure equals the atmospheric pressure (1 atm). A solution has a lower vapour pressure than the pure solvent at every temperature, so it must be heated further to reach 1 atm: it boils at T_b, higher than T°_b of the solvent. The elevation of boiling point is ΔT_b = T_b − T°_b. Experiment shows it is proportional to the molality.

ΔT_b = K_b × m = (K_b × w_B × 1000)/(M_B × w_A), so M_B = (K_b × w_B × 1000)/(ΔT_b × w_A), with masses in grams.

— Boiling point elevation

K_b, the molal boiling point elevation constant (ebullioscopic constant), is the rise for a 1 molal solution. It depends only on the solvent: K_b = R(T°_b)²M_solvent/ΔH_vap, with M in kg mol⁻¹. Values in the Tamil Nadu textbook include water 0.52, benzene 2.53 and chloroform 3.63 K kg mol⁻¹.

Worked example 2: K_b of water from its properties

Use T°_b = 373.15 K, M = 0.018 kg mol⁻¹ and ΔH_vap = 40.66 kJ mol⁻¹. Working: K_b = 8.314 × (373.15)² × 0.018 ÷ 40660. (373.15)² = 139241; 8.314 × 139241 = 1.1577 × 10⁶; × 0.018 = 20838; ÷ 40660 = 0.512 K kg mol⁻¹, matching the measured value.

Worked example 3: boiling point of a glucose solution and a molar mass

(a) 1.8 g glucose (180 g mol⁻¹) in 100 g water, K_b = 0.52 K kg mol⁻¹. Working: m = (1.8 ÷ 180) ÷ 0.100 = 0.010 ÷ 0.100 = 0.10 m; ΔT_b = 0.52 × 0.10 = 0.052 K; boiling point = 373.15 + 0.052 = 373.20 K. (b) 3.0 g of a solute in 50 g benzene raises its boiling point by 0.506 K (K_b = 2.53). Working: M_B = 2.53 × 3.0 × 1000 ÷ (0.506 × 50) = 7590 ÷ 25.3 = 300 g mol⁻¹.

Depression of freezing point

The freezing point is the temperature at which the solid and liquid have the same vapour pressure, so the two phases are in equilibrium (0 °C for water). The solution's vapour pressure is lower, so its curve meets that of the solid at a lower temperature: the solution freezes at T_f below T°_f. The depression of freezing point is ΔT_f = T°_f − T_f, again proportional to molality.

ΔT_f = K_f × m = (K_f × w_B × 1000)/(M_B × w_A), so M_B = (K_f × w_B × 1000)/(ΔT_f × w_A).

— Freezing point depression

K_f is the molal freezing point depression constant (cryoscopic constant): water 1.86, benzene 5.12 and cyclohexane 20.0 K kg mol⁻¹ (values from the Tamil Nadu textbook). Antifreeze such as ethylene glycol in a car radiator works this way.

Why a solute changes boiling and freezing points

  1. Non-volatile solute added Fewer solvent molecules at the surface.
  2. Vapour pressure lowered At every temperature.
  3. Higher boiling point Must heat more to reach 1 atm: ΔT_b = K_b m.
  4. Lower freezing point Meets the solid's vapour pressure at a lower temperature: ΔT_f = K_f m.

Worked example 4: freezing point of a urea solution and a molar mass

(a) 3.0 g urea (60 g mol⁻¹) in 200 g water, K_f = 1.86. Working: m = (3.0 ÷ 60) ÷ 0.200 = 0.050 ÷ 0.200 = 0.25 m; ΔT_f = 1.86 × 0.25 = 0.465 K; the solution freezes at 273.0 − 0.465 = 272.5 K (taking 273.0 K for water, as in the textbook's table). (b) 1.0 g of a non-electrolyte in 50 g benzene lowers its freezing point by 0.40 K (K_f = 5.12). Working: M_B = 5.12 × 1.0 × 1000 ÷ (0.40 × 50) = 5120 ÷ 20 = 256 g mol⁻¹.

Key takeaways: colligative properties count particles. (p° − p)/p° = x_B ≈ w_B M_A/(M_B w_A). ΔT_b = K_b m and ΔT_f = K_f m; rearrange to M_B = K × w_B × 1000/(ΔT × w_A). K_b and K_f belong to the solvent.

Check your understanding

  1. 1. Which of these is NOT a colligative property?

    1. Osmotic pressure
    2. Depression of freezing point
    3. Vapour pressure of a pure liquid
    4. Relative lowering of vapour pressure
    Show answer

    Answer: C. The vapour pressure of a pure liquid depends on what the liquid is, and there is no solute to count. The other three depend only on the number of solute particles.

  2. 2. What is the boiling point of a solution of 0.10 mol of a non-volatile non-electrolyte in 250 g water? (K_b = 0.52 K kg mol⁻¹; pure water boils at 373.15 K)

    1. 373.36 K
    2. 373.20 K
    3. 373.67 K
    4. 372.94 K
    Show answer

    Answer: A. m = 0.10 ÷ 0.250 = 0.40 m. ΔT_b = 0.52 × 0.40 = 0.208 K. Boiling point = 373.15 + 0.208 = 373.36 K. A solute raises, not lowers, the boiling point.

  3. 3. 1.5 g of a solute dissolved in 60 g water lowers the freezing point by 0.31 K (K_f = 1.86 K kg mol⁻¹). What is its molar mass?

    1. 60 g mol⁻¹
    2. 180 g mol⁻¹
    3. 342 g mol⁻¹
    4. 150 g mol⁻¹
    Show answer

    Answer: D. M_B = K_f × w_B × 1000 ÷ (ΔT_f × w_A) = 1.86 × 1.5 × 1000 ÷ (0.31 × 60) = 2790 ÷ 18.6 = 150 g mol⁻¹.

  4. 4. Why does a solution of a non-volatile solute boil at a higher temperature than the pure solvent?

    1. The solute raises the atmospheric pressure.
    2. The solute lowers the vapour pressure, so more heating is needed to reach atmospheric pressure.
    3. The solute increases the vapour pressure of the solvent.
    4. The solute reacts with the solvent.
    Show answer

    Answer: B. Boiling happens when vapour pressure equals the outside pressure. The solution's vapour pressure is lower at every temperature, so it reaches 1 atm only at a higher temperature.

  5. 5. The vapour pressure of a pure liquid (M = 100 g mol⁻¹) is 50.0 torr. Dissolving 2.0 g of a solute in 40 g of it lowers the vapour pressure to 47.5 torr. What is the molar mass of the solute, using the dilute-solution formula?

    1. 200 g mol⁻¹
    2. 50 g mol⁻¹
    3. 100 g mol⁻¹
    4. 25 g mol⁻¹
    Show answer

    Answer: C. Δp/p° = (50.0 − 47.5) ÷ 50.0 = 2.5 ÷ 50.0 = 0.050. M_B = w_B × M_A ÷ (w_A × 0.050) = 2.0 × 100 ÷ (40 × 0.050) = 200 ÷ 2.0 = 100 g mol⁻¹.

Privacy · Terms · Refunds · Delivery