- Practice
- About 24 min
- 5 practice questions
Types of solutions and ways of expressing concentration
Classify solutions by the states of solute and solvent and express concentration as molality, molarity, normality, formality, mole fraction, percentage and ppm.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define a solution, solvent and solute, and give an example of each type of solution.
- Calculate molality, molarity, normality and formality.
- Calculate mole fraction, % w/w, % v/v, % w/v and ppm.
- Choose the right unit for a given use.
Most materials around us are mixtures, and many are uniform throughout. Sea water (mostly dissolved NaCl), air (nitrogen, oxygen, carbon dioxide and other gases) and brass (copper and zinc) look very different, but each is homogeneous: its components are spread evenly. Such homogeneous mixtures are solutions.
Solvent, solute and types of solutions
A solution is a homogeneous mixture of two or more substances made of atoms, ions or molecules. The component present in the largest amount is the solvent; the others are solutes. In salt water, water is the solvent and NaCl the solute, with Na⁺ and Cl⁻ spread evenly. A solution in water is an aqueous solution; one in benzene, CCl₄, ether and so on is a non-aqueous solution. Solute and solvent can each be solid, liquid or gas.
| State of solution | Solute | Solvent | Example |
|---|---|---|---|
| Gaseous | Gas | Gas | Air |
| Gaseous | Liquid | Gas | Humid oxygen (water vapour in oxygen) |
| Gaseous | Solid | Gas | Camphor vapour in nitrogen |
| Liquid | Gas | Liquid | Carbonated water (CO₂ in water) |
| Liquid | Liquid | Liquid | Ethanol in water |
| Liquid | Solid | Liquid | Salt water |
| Solid | Gas | Solid | Hydrogen in palladium |
| Solid | Liquid | Solid | Amalgam (mercury in a metal such as sodium) |
| Solid | Solid | Solid | Gold-copper alloy used in jewellery |
Concentration units
The concentration of a solution tells how much solute is present in a given quantity of solvent or solution. Medicine and household labels use percentages (for example 3% w/v hydrogen peroxide); water quality uses ppm; laboratories use molar and normal solutions.
| Term | Definition |
|---|---|
| Molality (m) | moles of solute ÷ mass of solvent in kg (mol kg⁻¹) |
| Molarity (M) | moles of solute ÷ volume of solution in L (mol L⁻¹) |
| Normality (N) | gram equivalents of solute ÷ volume of solution in L |
| Formality (F) | number of gram formula masses of solute ÷ volume of solution in L (used for ionic solids) |
| Mole fraction (x) | moles of a component ÷ total moles of all components; xA + xB = 1 |
| Mass percentage (% w/w) | (mass of solute in g ÷ mass of solution in g) × 100 |
| Volume percentage (% v/v) | (volume of solute in mL ÷ volume of solution in mL) × 100 |
| Mass by volume percentage (% w/v) | (mass of solute in g ÷ volume of solution in mL) × 100 |
| Parts per million (ppm) | (mass of solute ÷ mass of solution) × 10⁶ |
Molality uses the mass of SOLVENT (kg); molarity uses the volume of SOLUTION (L). Molality does not change with temperature; molarity does, because volume changes.
Worked example 1: molality, molarity, normality and formality
- Molality: 9.0 g glucose (C₆H₁₂O₆, 180 g mol⁻¹) in 250 g water. Moles = 9.0 ÷ 180 = 0.050 mol; m = 0.050 ÷ 0.250 kg = 0.20 m.
- Molarity: 4.0 g NaOH (40 g mol⁻¹) made up to 250 mL. Moles = 4.0 ÷ 40 = 0.10 mol; M = 0.10 ÷ 0.250 L = 0.40 M.
- Normality: 4.9 g H₂SO₄ (98 g mol⁻¹, dibasic, equivalent mass 98 ÷ 2 = 49) made up to 500 mL. Gram equivalents = 4.9 ÷ 49 = 0.10; N = 0.10 ÷ 0.500 L = 0.20 N.
- Formality: 2.925 g NaCl (formula mass 58.5) made up to 250 mL. Formula masses = 2.925 ÷ 58.5 = 0.050; F = 0.050 ÷ 0.250 L = 0.20 F.
Worked example 2: mole fraction, percentages and ppm
- Mole fraction: 46 g ethanol (46 g mol⁻¹) mixed with 54 g water (18 g mol⁻¹). Moles: 1.0 and 3.0. x(ethanol) = 1.0 ÷ 4.0 = 0.25; x(water) = 3.0 ÷ 4.0 = 0.75; check: 0.25 + 0.75 = 1.
- % w/w: 5.0 g sugar dissolved in 95 g water. Mass of solution = 100 g; % w/w = 5.0 ÷ 100 × 100 = 5% w/w.
- % v/v: 30 mL ethanol made up to 200 mL with water: 30 ÷ 200 × 100 = 15% v/v.
- % w/v: 0.45 g NaCl in 50 mL of solution: 0.45 ÷ 50 × 100 = 0.9% w/v.
- ppm: 500 g of a water sample contains 0.75 mg (7.5 × 10⁻⁴ g) of dissolved solids: (7.5 × 10⁻⁴ ÷ 500) × 10⁶ = 1.5 ppm.
Which unit for which job
-
Molarity
- Titrations in a 1:1 mole ratio, such as EDTA titrations
-
Normality
- Redox and neutralisation titrations
-
Mole fraction
- Partial pressures of gases and vapour pressures of solutions
-
Percentages
- Active ingredients in medicines
-
ppm
- Very small amounts of solute, such as dissolved solids in water
Key takeaways: a solution is homogeneous; the solvent is the major component. Molality is per kg of solvent, molarity per litre of solution, normality counts gram equivalents and formality counts formula masses. Mole fractions add to 1; percentages and ppm suit medicines and traces.
Check your understanding
-
1. What is the molality of a solution made by dissolving 6.0 g urea (60 g mol⁻¹) in 500 g water?
- 0.10 m
- 0.20 m
- 0.012 m
- 2.0 m
Show answer
Answer: B. Moles of urea = 6.0 ÷ 60 = 0.10 mol. Mass of water = 0.500 kg. Molality = 0.10 ÷ 0.500 = 0.20 mol kg⁻¹.
-
2. 8.0 g NaOH (40 g mol⁻¹) is dissolved and made up to 500 mL. What is the molarity?
- 0.20 M
- 0.016 M
- 0.40 M
- 4.0 M
Show answer
Answer: C. Moles = 8.0 ÷ 40 = 0.20 mol. Volume = 0.500 L. Molarity = 0.20 ÷ 0.500 = 0.40 mol L⁻¹.
-
3. A solution contains 2 mol of A and 6 mol of B. What is the mole fraction of A?
- 0.33
- 0.75
- 2.0
- 0.25
Show answer
Answer: D. x_A = n_A ÷ (n_A + n_B) = 2 ÷ (2 + 6) = 2 ÷ 8 = 0.25. (0.33 is n_A ÷ n_B, which is not a mole fraction.)
-
4. Which concentration unit does NOT change when the temperature of the solution changes?
- Molality
- Molarity
- Normality
- Mass by volume percentage
Show answer
Answer: A. Molality uses masses only (moles of solute and kg of solvent), and mass does not change with temperature. The other three use the volume of solution, which expands or contracts with temperature.
-
5. 2.0 kg of a water sample contains 5.0 mg of dissolved lead salts. What is the concentration in ppm?
- 2.5 ppm
- 0.25 ppm
- 25 ppm
- 2500 ppm
Show answer
Answer: A. ppm = (mass of solute ÷ mass of solution) × 10⁶ = (5.0 × 10⁻³ g ÷ 2000 g) × 10⁶ = 2.5 × 10⁻⁶ × 10⁶ = 2.5 ppm.
Sign in to keep track of the lessons you finish.