- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Solutions
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before checking any answer. Write out each calculation; the explanations show the full working so you can find exactly where a slip happened.
Final self-assessment
-
1. A solution is made by dissolving 4.9 g of H₂SO₄ (98 g mol⁻¹) in water and making it up to 250 mL. What are its molarity and normality?
- 0.20 M and 0.40 N
- 0.40 M and 0.20 N
- 0.20 M and 0.20 N
- 0.05 M and 0.10 N
Show answer
Answer: A. Moles = 4.9 ÷ 98 = 0.050; M = 0.050 ÷ 0.250 = 0.20 M. H₂SO₄ is dibasic, equivalent mass 49, gram equivalents = 4.9 ÷ 49 = 0.10; N = 0.10 ÷ 0.250 = 0.40 N.
-
2. 3.6 g glucose (180 g mol⁻¹) is dissolved in 36 g water (18 g mol⁻¹). What is the mole fraction of glucose?
- 0.10
- 0.0099
- 0.020
- 0.99
Show answer
Answer: B. Glucose: 3.6 ÷ 180 = 0.020 mol. Water: 36 ÷ 18 = 2.0 mol. x = 0.020 ÷ (0.020 + 2.0) = 0.020 ÷ 2.020 = 0.0099. (0.010 would come from dividing by the water alone, the dilute-solution shortcut; 0.99 is water's mole fraction.)
-
3. A cough syrup label says 60 mL of syrup contains 1.2 g of an active ingredient. What is its concentration in % w/v?
- 0.02%
- 20%
- 5%
- 2%
Show answer
Answer: D. % w/v = (mass in g ÷ volume in mL) × 100 = (1.2 ÷ 60) × 100 = 0.02 × 100 = 2% w/v.
-
4. How many mL of 10 M NaOH are needed to prepare 400 mL of 0.25 M NaOH?
- 16 mL
- 4 mL
- 10 mL
- 40 mL
Show answer
Answer: C. Vs = Cw × Vw ÷ Cs = 0.25 × 400 ÷ 10 = 100 ÷ 10 = 10 mL.
-
5. Why is a bottle of soda more fizzy when opened warm than when opened cold?
- CO₂ is more soluble in warm water.
- CO₂ reacts with warm water.
- CO₂ is less soluble in warm water, so more gas escapes.
- Warm water raises the pressure inside to zero.
Show answer
Answer: C. The solubility of gases falls as temperature rises, so a warm drink holds less CO₂ once the pressure is released and more gas escapes as bubbles.
-
6. A gas mixture containing 40% of gas X by volume is in contact with water at a total pressure of 2.0 atm. Taking K_H(X) = 8.0 × 10⁴ atm (practice value), what is the mole fraction of X dissolved in the water?
- 1.0 × 10⁻⁵
- 2.5 × 10⁻⁵
- 6.4 × 10⁴
- 5.0 × 10⁻⁶
Show answer
Answer: A. Partial pressure of X = 0.40 × 2.0 atm = 0.80 atm. x = p ÷ K_H = 0.80 ÷ (8.0 × 10⁴) = 1.0 × 10⁻⁵. Using the total pressure (2.0 atm) instead of the partial pressure gives 2.5 × 10⁻⁵.
-
7. Two liquids form an ideal solution: p°A = 90 mmHg, p°B = 30 mmHg, x_A = 0.50. What is the mole fraction of A in the VAPOUR?
- 0.50
- 0.25
- 0.75
- 0.60
Show answer
Answer: C. p_A = 90 × 0.50 = 45 mmHg; p_B = 30 × 0.50 = 15 mmHg; total = 60 mmHg. Vapour mole fraction of A = 45 ÷ 60 = 0.75: the vapour is richer in the more volatile component.
-
8. Mixing acetone and chloroform gives out heat. What else is expected?
- Positive deviation and an increase in volume
- Negative deviation and a slight decrease in volume
- Ideal behaviour
- Positive deviation and no change in volume
Show answer
Answer: B. Heat is released because acetone-chloroform attractions (hydrogen bonding) are stronger than those in the pure liquids. That lowers the escaping tendency (negative deviation) and draws the molecules closer (ΔV_mixing < 0).
-
9. Which statement about Raoult's and Henry's laws is correct?
- Raoult's law applies only to gases dissolved in liquids.
- Henry's law constant is always equal to p° of the solvent.
- In both laws partial pressure is inversely proportional to mole fraction.
- Raoult's law is the special case of Henry's law where K_H equals p° of the component.
Show answer
Answer: D. Both laws have the form p = constant × x. When the constant K_H equals the vapour pressure of the pure component, Henry's law becomes Raoult's law. Pressure is directly, not inversely, proportional to mole fraction.
-
10. The vapour pressure of a pure liquid A (M = 78 g mol⁻¹) is 25.0 torr. Dissolving 1.2 g of B in 39 g of A lowers it to 24.5 torr. Using the dilute-solution formula, what is the molar mass of B?
- 60 g mol⁻¹
- 240 g mol⁻¹
- 30 g mol⁻¹
- 120 g mol⁻¹
Show answer
Answer: D. Δp/p° = (25.0 − 24.5) ÷ 25.0 = 0.020. M_B = w_B × M_A ÷ (w_A × 0.020) = 1.2 × 78 ÷ (39 × 0.020) = 93.6 ÷ 0.78 = 120 g mol⁻¹.
-
11. A car radiator contains 25% by mass ethylene glycol (62 g mol⁻¹) in water. At about what temperature will ice begin to separate? (K_f = 1.86 K kg mol⁻¹; water freezes at 273.0 K)
- 263.0 K
- 265.5 K
- 270.0 K
- 283.0 K
Show answer
Answer: A. In 100 g of mixture: 25 g glycol and 75 g water. m = (25 ÷ 62) ÷ 0.075 = 0.4032 ÷ 0.075 = 5.376 m. ΔT_f = 1.86 × 5.376 = 10.0 K. Ice separates at 273.0 − 10.0 = 263.0 K.
-
12. 0.90 g of a non-electrolyte in 50 g water raises the boiling point by 0.052 K (K_b = 0.52 K kg mol⁻¹). What is its molar mass?
- 90 g mol⁻¹
- 180 g mol⁻¹
- 360 g mol⁻¹
- 18 g mol⁻¹
Show answer
Answer: B. M_B = K_b × w_B × 1000 ÷ (ΔT_b × w_A) = 0.52 × 0.90 × 1000 ÷ (0.052 × 50) = 468 ÷ 2.6 = 180 g mol⁻¹.
-
13. What mass of glucose (180 g mol⁻¹) in one litre of solution is isotonic with a solution of 3.0 g L⁻¹ urea (60 g mol⁻¹)?
- 3.0 g
- 18 g
- 4.5 g
- 9.0 g
Show answer
Answer: D. Isotonic non-electrolytes have equal molarity. Urea: 3.0 ÷ 60 = 0.050 mol L⁻¹. Glucose needed: 0.050 × 180 = 9.0 g L⁻¹.
-
14. A 0.050 m aqueous KCl solution freezes at −0.175 °C (practice data). What are the van't Hoff factor and the degree of dissociation? (K_f = 1.86 K kg mol⁻¹)
- i = 1.88, α = 0.88
- i = 1.88, α = 0.94
- i = 0.53, α = 0.47
- i = 2.00, α = 1.00
Show answer
Answer: A. Calculated ΔT_f = 1.86 × 0.050 = 0.093 K. i = observed ÷ calculated = 0.175 ÷ 0.093 = 1.88. KCl gives n = 2 ions, so α = (i − 1)/(n − 1) = 0.88 ÷ 1 = 0.88, about 88% dissociated.
-
15. 1.0 g of a polymer in 250 mL of solution has an osmotic pressure of 0.0041 atm at 300 K. What is its molar mass? (R = 0.0821 L atm K⁻¹ mol⁻¹)
- 6.0 × 10³ g mol⁻¹
- 2.4 × 10⁴ g mol⁻¹
- 2.4 × 10⁷ g mol⁻¹
- 6.0 × 10⁴ g mol⁻¹
Show answer
Answer: B. M = w RT ÷ (πV) = 1.0 × 0.0821 × 300 ÷ (0.0041 × 0.250) = 24.63 ÷ 0.001025 = 2.40 × 10⁴ g mol⁻¹. Using V = 250 L instead of 0.250 L would give a very different, wrong answer.
Questions 1-3: lesson 1. Questions 4-6: lesson 2. Questions 7-9: lesson 3. Questions 10-12: lesson 4. Questions 13-15: lesson 5.
Sign in to keep track of the lessons you finish.