- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Properties of Matter
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before checking the answers. Use g = 9.8 m s⁻² and the density of water 1000 kg m⁻³ unless told otherwise, and write out the working for each numerical question.
Final self-assessment
-
1. Two wires of the same material carry the same load. Wire B is twice as long as wire A and has twice its diameter. The ratio of the extension of B to that of A is:
- 2 : 1
- 1 : 4
- 1 : 2
- 4 : 1
Show answer
Answer: C. ΔL = FL/(AY) with A ∝ D². For B: L doubles (×2) and A becomes 4 times (×1/4), so ΔL_B/ΔL_A = 2/4 = 1/2.
-
2. A pressure of 2.0 × 10⁶ Pa reduces the volume of a solid by 0.010%. Its bulk modulus is:
- 2.0 × 10¹⁰ Pa
- 2.0 × 10⁸ Pa
- 2.0 × 10¹² Pa
- 2.0 × 10⁴ Pa
Show answer
Answer: A. Volume strain = 0.010% = 1.0 × 10⁻⁴. K = P/(|ΔV|/V) = 2.0 × 10⁶/1.0 × 10⁻⁴ = 2.0 × 10¹⁰ Pa.
-
3. A steel wire (Y = 2.0 × 10¹¹ N m⁻²) is under a strain of 1.0 × 10⁻³. The elastic energy stored per unit volume is:
- 2.0 × 10⁸ J m⁻³
- 2.0 × 10⁵ J m⁻³
- 1.0 × 10⁸ J m⁻³
- 1.0 × 10⁵ J m⁻³
Show answer
Answer: D. u = ½ × stress × strain = ½ Y (strain)² = ½ × 2.0 × 10¹¹ × (1.0 × 10⁻³)² = ½ × 2.0 × 10⁵ = 1.0 × 10⁵ J m⁻³.
-
4. Taking 1 atm = 1.013 × 10⁵ Pa, at what depth in fresh water is the total pressure 3 atm?
- 10.3 m
- 20.7 m
- 31.0 m
- 30.0 m
Show answer
Answer: B. P = Pₐ + ρgh, so ρgh = 2 atm = 2.026 × 10⁵ Pa. h = 2.026 × 10⁵/(1000 × 9.8) = 20.7 m.
-
5. A block of wood of density 800 kg m⁻³ floats in water. The fraction of its volume above the water surface is:
- 80%
- 8%
- 20%
- 25%
Show answer
Answer: C. Fraction submerged = ρ_body/ρ_water = 800/1000 = 0.80, so the fraction above the surface is 1 − 0.80 = 0.20, or 20%.
-
6. A floating cube of side 10 cm has a 200 g mass placed on its top face. How much further does it sink into the water?
- 2.0 cm
- 0.20 cm
- 20 cm
- 1.0 cm
Show answer
Answer: A. The extra upthrust must equal the extra weight: ρ_water × A × Δh = m. Δh = 0.200/(1000 × 0.10 × 0.10) = 0.200/10 = 0.020 m = 2.0 cm.
-
7. A plate of area 0.050 m² is moved at 0.40 m s⁻¹ over a 1.0 mm layer of liquid on a fixed surface, needing a force of 0.60 N. The coefficient of viscosity is:
- 0.30 N s m⁻²
- 3.0 N s m⁻²
- 0.0030 N s m⁻²
- 0.030 N s m⁻²
Show answer
Answer: D. η = F dx/(A dv) = 0.60 × 1.0 × 10⁻³/(0.050 × 0.40) = 6.0 × 10⁻⁴/0.020 = 0.030 N s m⁻².
-
8. A small cork ball is released at the bottom of a tall jar of glycerine. It will:
- stay at the bottom
- rise, soon reaching a steady (terminal) speed upward
- rise with ever-increasing speed
- sink further, as the upthrust is zero
Show answer
Answer: B. Cork is less dense than glycerine, so σ > ρ and the net force is upward. As it rises, viscous drag grows until it balances the net upward force; v_t = 2r²(ρ − σ)g/9η is then negative, meaning a steady upward speed.
-
9. Water (η = 1.0 × 10⁻³ Pa s) flows at 0.50 m s⁻¹ in a pipe of diameter 1.0 cm. Its Reynolds' number and type of flow are:
- 5000, turbulent
- 500, streamlined
- 50, streamlined
- 1500, unsteady
Show answer
Answer: A. R_c = ρvD/η = 1000 × 0.50 × 0.010/1.0 × 10⁻³ = 5.0/1.0 × 10⁻³ = 5000. This is above 2000, so the flow is turbulent.
-
10. Two soap bubbles have radii 1.0 cm and 2.0 cm. The ratio of the excess pressure inside the smaller one to that inside the larger one is:
- 1 : 2
- 1 : 4
- 2 : 1
- 4 : 1
Show answer
Answer: C. ΔP = 4T/R, so ΔP ∝ 1/R. The smaller bubble has half the radius and therefore twice the excess pressure: 2 : 1.
-
11. Water (T = 0.070 N m⁻¹, angle of contact 0°) rises in a glass capillary of radius 0.10 mm. The height of rise is about:
- 1.4 cm
- 7.1 cm
- 28.6 cm
- 14.3 cm
Show answer
Answer: D. h = 2T cos θ/(rρg) = 2 × 0.070 × 1/(1.0 × 10⁻⁴ × 1000 × 9.8) = 0.14/0.98 = 0.143 m ≈ 14.3 cm.
-
12. How much work is needed to blow a soap bubble of radius 2.0 cm if the surface tension of the soap solution is 0.025 N m⁻¹?
- 1.26 × 10⁻⁴ J
- 2.51 × 10⁻⁴ J
- 5.03 × 10⁻⁴ J
- 1.0 × 10⁻⁵ J
Show answer
Answer: B. A soap bubble has two surfaces: ΔA = 2 × 4πr² = 8π × (0.020)² = 8π × 4.0 × 10⁻⁴ = 1.005 × 10⁻² m². W = TΔA = 0.025 × 1.005 × 10⁻² = 2.51 × 10⁻⁴ J. (Counting only one surface gives the wrong answer 1.26 × 10⁻⁴ J.)
-
13. Water flows at 0.40 m s⁻¹ in a pipe of diameter 6.0 cm, which narrows to 2.0 cm. The speed in the narrow part is:
- 3.6 m s⁻¹
- 1.2 m s⁻¹
- 0.13 m s⁻¹
- 0.044 m s⁻¹
Show answer
Answer: A. a₁v₁ = a₂v₂ with area ∝ diameter². v₂ = v₁ × (6.0/2.0)² = 0.40 × 9 = 3.6 m s⁻¹.
-
14. Wind at 20 m s⁻¹ blows over a roof of area 40 m², with still air below (air density 1.2 kg m⁻³). The upward force on the roof is about:
- 240 N
- 960 N
- 4800 N
- 9600 N
Show answer
Answer: D. ΔP = ½ρv² = ½ × 1.2 × 20² = 0.6 × 400 = 240 Pa. Force = ΔP × area = 240 × 40 = 9600 N.
-
15. Bernoulli's theorem in the form P/ρ + ½v² + gh = constant holds strictly for:
- any fluid in any kind of flow
- viscous liquids in turbulent flow
- incompressible, non-viscous liquids in streamlined flow
- gases only
Show answer
Answer: C. The proof assumes no energy is lost to friction (non-viscous), a constant density (incompressible) and steady, streamlined flow along which energy is followed. Real fluids lose some energy as heat, so it is then only approximate.
Questions 1-3: lesson 1 (elasticity). Questions 4-6: lesson 2 (fluids at rest). Questions 7-9: lesson 3 (viscosity). Questions 10-12: lesson 4 (surface tension and capillarity). Questions 13-15: lesson 5 (continuity and Bernoulli's theorem).
Sign in to keep track of the lessons you finish.