• Practice
  • About 24 min
  • 5 practice questions

Reduction of metal oxides: smelting, carbon, hydrogen and metals

Explain smelting with flux and slag for iron and copper, and write balanced equations for reduction of oxides by carbon, hydrogen, aluminium and active metals, and for auto-reduction.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define flux and slag and pick an acidic or basic flux.
  • Describe how copper matte and blister copper form, with equations.
  • Write equations for reduction by carbon, hydrogen, water gas, aluminium and active metals.
  • Explain auto-reduction using cinnabar.

The oxide from lesson 2 must now lose its oxygen. Possible reducing agents include carbon, carbon monoxide, hydrogen, aluminium and active metals such as sodium, magnesium and calcium. The choice depends on the metal: carbon cannot reduce oxides of very reactive metals such as sodium, potassium and aluminium, and CO cannot reduce ZnO or Al₂O₃ under ordinary furnace conditions. Lesson 4 explains this choice with the Ellingham diagram.

Smelting

In smelting, the concentrated ore is mixed with a reducing agent (carbon, carbon monoxide or aluminium) and a flux, and heated above the melting point of the metal in a smelting furnace. A flux is a substance that combines with gangue to form an easily fusible slag. The flux is chosen to be the chemical opposite of the gangue:

  • Gangue is acidic (silica, SiO₂) → use a basic flux such as quick lime, CaO.
  • Gangue is basic (such as FeO) → use an acidic flux such as silica, SiO₂.

Iron from its oxide

Iron oxide is reduced by carbon monoxide: Fe₂O₃(s) + 3CO(g) → 2Fe(s) + 3CO₂(g). Check: Fe 2 = 2; C 3 = 3; O 3 + 3 = 6 and 6 = 6. The silica gangue is removed by quick lime: CaO(s) + SiO₂(s) → CaSiO₃(s), where CaO is the flux, SiO₂ the gangue and CaSiO₃ the slag. Molten slag floats on the molten iron and is run off separately.

Copper from copper pyrites

The concentrated ore is heated in a reverberatory furnace with silica (an acidic flux). Iron is removed as slag and copper is left as matte, a molten mixture of Cu₂S and FeS which are mutually soluble.

  1. 2CuFeS₂(s) + O₂(g) → Cu₂S(l) + 2FeS(l) + SO₂(g) (check: Cu 2, Fe 2, S 4 = 1 + 2 + 1, O 2 = 2)
  2. 2FeS(l) + 3O₂(g) → 2FeO(l) + 2SO₂(g) (check: O 6 = 2 + 4)
  3. FeO(s) + SiO₂(s) → FeSiO₃(s) (FeO is the basic gangue, SiO₂ the flux, FeSiO₃ the slag)

The matte goes to a converter. Air blown through it oxidises the remaining FeS to FeO, which is slagged off with silica. Copper sulphide is then partly oxidised, and the oxide reacts with the remaining sulphide:

  • 2Cu₂S + 3O₂ → 2Cu₂O + 2SO₂ (check: O 6 = 2 + 4)
  • 2Cu₂O + Cu₂S → 6Cu + SO₂ (check: Cu 4 + 2 = 6; O 2 = 2; S 1 = 1)

The copper solidifies with a blistered surface, caused by escaping SO₂ bubbles, so it is called blister copper. Note that in the last step no added reducing agent is needed: sulphide sulphur reduces the copper.

Extraction of copper from copper pyrites

  1. Froth flotation Concentrates the sulphide ore.
  2. Reverberatory furnace with silica Iron removed as FeSiO₃ slag; copper matte (Cu₂S + FeS) forms.
  3. Converter with air Remaining FeS slagged; Cu₂S partly oxidised to Cu₂O.
  4. Self-reduction 2Cu₂O + Cu₂S → 6Cu + SO₂ gives blister copper.
  5. Refining Electrolytic refining gives pure copper (lesson 5).

Reduction by carbon

The oxide is heated strongly with coke, usually in a blast furnace. This works only for metals that do not form carbides with carbon at the reduction temperature: ZnO + C → Zn + CO; Mn₃O₄ + 4C → 3Mn + 4CO (check: Mn 3, O 4, C 4); Cr₂O₃ + 3C → 2Cr + 3CO (check: Cr 2, O 3, C 3).

Reduction by hydrogen

Hydrogen reduces oxides of metals such as silver, copper, lead and iron: Ag₂O + H₂ → 2Ag + H₂O; Fe₃O₄ + 4H₂ → 3Fe + 4H₂O (check: Fe 3, O 4, H 8). Nickel oxide is reduced by water gas, a mixture of CO and H₂: 2NiO + CO + H₂ → 2Ni + CO₂ + H₂O (check: Ni 2; O 2 + 1 = 3 and 2 + 1 = 3; C 1; H 2).

Reduction by a more reactive metal

In the aluminothermic process, chromium(III) oxide is mixed with aluminium powder in a fire-clay crucible. An ignition mixture of magnesium and barium peroxide (BaO₂ + Mg → BaO + MgO) starts the reaction, which then gives out so much heat that the temperature rises to about 2400 °C (as stated in the Tamil Nadu textbook):

Cr₂O₃ + 2Al → 2Cr + Al₂O₃ (check: Cr 2 = 2; Al 2 = 2; O 3 = 3)

Active metals reduce other stable oxides too: B₂O₃ + 6Na → 2B + 3Na₂O (check: B 2, O 3, Na 6); TiO₂ + 2Mg → Ti + 2MgO (check: Ti 1, O 2, Mg 2); ThO₂ + 2Ca → Th + 2CaO (at about 1250 K).

Auto-reduction

Some ores give the metal simply on roasting, with no added reducing agent. Mercury is obtained by roasting cinnabar: HgS(s) + O₂(g) → Hg(l) + SO₂(g). Here sulphur (−2 → +4) is oxidised and mercury (+2 → 0) is reduced: the sulphide reduces its own metal. The last step of copper extraction is a similar self-reduction.

Methods of reducing a metal oxide

  • Smelting
    • Ore + reducing agent + flux, melted
    • Fe₂O₃ with CO; slag CaSiO₃
  • Carbon (coke)
    • Metals that form no carbide
    • ZnO, Mn₃O₄, Cr₂O₃
  • Hydrogen or water gas
    • Ag₂O, Fe₃O₄, NiO
  • Reactive metal
    • Aluminothermy: Cr₂O₃ + 2Al
    • Na, Mg, Ca for B₂O₃, TiO₂, ThO₂
  • Auto-reduction
    • No reducing agent added
    • HgS + O₂ → Hg + SO₂

Worked example: aluminium needed in aluminothermy

What mass of aluminium reduces 76.0 g of Cr₂O₃, and what mass of chromium forms? Use Cr = 52.00, O = 16.00, Al = 26.98. Working: M(Cr₂O₃) = 2 × 52.00 + 3 × 16.00 = 152.00 g mol⁻¹, so moles of Cr₂O₃ = 76.0 ÷ 152.00 = 0.500 mol. From Cr₂O₃ + 2Al → 2Cr + Al₂O₃, Al needed = 2 × 0.500 = 1.000 mol = 26.98 g; Cr formed = 1.000 mol = 52.0 g.

Worked example: identifying flux, gangue and slag

In FeO + SiO₂ → FeSiO₃, which is which? Working: the copper ore contained iron, which became FeO, a basic oxide and the unwanted part, so FeO is the gangue (impurity). SiO₂, an acidic oxide, is added deliberately, so it is the flux. FeSiO₃ is the fusible product, the slag. In iron extraction the roles reverse: SiO₂ is the gangue and CaO the flux.

Key takeaways: flux + gangue → slag, acid with base. Copper: matte → converter → blister copper by self-reduction. Carbon works for metals that form no carbide; hydrogen for less reactive metals; aluminium and active metals for stable oxides; HgS reduces itself.

Check your understanding

  1. 1. What is the role of quick lime in the extraction of iron from Fe₂O₃?

    1. It reduces Fe₂O₃ to iron.
    2. It is a basic flux that removes silica as calcium silicate slag.
    3. It is an acidic flux that removes FeO.
    4. It oxidises carbon to CO.
    Show answer

    Answer: B. Silica gangue is acidic, so a basic flux, quick lime, is added: CaO + SiO₂ → CaSiO₃ (slag). The reduction itself is done by CO.

  2. 2. Copper matte consists mainly of

    1. Cu₂O and FeO
    2. CuFeS₂ and SiO₂
    3. Cu₂S and FeS
    4. Cu and FeSiO₃
    Show answer

    Answer: C. In the reverberatory furnace, the sulphides Cu₂S and FeS that remain are mutually soluble and form the molten matte; FeO goes into the FeSiO₃ slag.

  3. 3. Which reaction is an example of auto-reduction?

    1. HgS + O₂ → Hg + SO₂
    2. Cr₂O₃ + 2Al → 2Cr + Al₂O₃
    3. ZnO + C → Zn + CO
    4. Fe₃O₄ + 4H₂ → 3Fe + 4H₂O
    Show answer

    Answer: A. In roasting cinnabar no reducing agent is added: the sulphide sulphur is oxidised (−2 → +4) and reduces Hg²⁺ to mercury. The others use aluminium, carbon or hydrogen.

  4. 4. In the aluminothermic process, the mixture of magnesium and barium peroxide is used

    1. as a flux
    2. as the main reducing agent
    3. to absorb the heat
    4. as an ignition mixture to start the reaction
    Show answer

    Answer: D. Mg and BaO₂ react (BaO₂ + Mg → BaO + MgO) to give the high starting temperature; aluminium then reduces Cr₂O₃ with a large release of heat.

  5. 5. How many moles of carbon are needed to reduce 2 mol of Mn₃O₄ according to Mn₃O₄ + 4C → 3Mn + 4CO?

    1. 4 mol
    2. 8 mol
    3. 6 mol
    4. 3 mol
    Show answer

    Answer: B. The equation needs 4 mol C per 1 mol Mn₃O₄, so 2 mol needs 2 × 4 = 8 mol C, giving 6 mol Mn and 8 mol CO.

Privacy · Terms · Refunds · Delivery