Revision notes

Unit 1 Metallurgy: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Minerals, ores and the concentration of ores

Common ores, as listed in the Tamil Nadu textbook (table 1.1)
MetalOre (formula)
AluminiumBauxite Al₂O₃·nH₂O; diaspore Al₂O₃·H₂O; kaolinite Al₂Si₂O₅(OH)₄
IronHaematite Fe₂O₃; magnetite Fe₃O₄; siderite FeCO₃; iron pyrite FeS₂; limonite Fe₂O₃·3H₂O
CopperCopper pyrite CuFeS₂; copper glance Cu₂S; cuprite Cu₂O; malachite CuCO₃·Cu(OH)₂; azurite 2CuCO₃·Cu(OH)₂
ZincZinc blende (sphalerite) ZnS; calamine ZnCO₃; zincite ZnO
LeadGalena PbS; anglesite PbSO₄; cerussite PbCO₃
TinCassiterite (tin stone) SnO₂
SilverSilver glance (argentite) Ag₂S; horn silver (chlorargyrite) AgCl; ruby silver (pyrargyrite) Ag₃SbS₃

From ore to pure metal

  1. Concentration of the ore Remove gangue (rock, sand, earthy matter) so the metal compound is enriched.
  2. Extraction of crude metal Convert the ore to the oxide, then reduce the oxide to the metal.
  3. Refining of crude metal Remove the remaining impurities to get pure metal.

Choosing a physical concentration method

  • Gravity separation
    • Property used: density
    • Ore heavier than gangue
    • Gold, haematite, tin stone
  • Froth flotation
    • Property used: wetting by oil
    • Sulphide ores
    • Galena, zinc blende; NaCN depresses ZnS
  • Magnetic separation
    • Property used: magnetism
    • Ore or impurity is magnetic
    • Tin stone from wolframite; chromite

Gangue + ore → concentration. Heavy ore: gravity. Sulphide ore: froth flotation. Magnetic difference: magnetic separation. Chemical solubility: leaching (next lesson).

Key takeaways: all ores are minerals but not all minerals are ores; the deciding test is economic extraction. Metallurgy runs concentration → extraction → refining. Physical concentration uses density, oil-wetting or magnetism.

Read the full lesson

Lesson 2

Leaching, roasting and calcination

4Au(s) + 8CN⁻(aq) + O₂(g) + 2H₂O(l) → 4[Au(CN)₂]⁻(aq) + 4OH⁻(aq)

Zn(s) + 2[Au(CN)₂]⁻(aq) → [Zn(CN)₄]²⁻(aq) + 2Au(s)

Al₂O₃(s) + 2NaOH(aq) + 3H₂O(l) → 2Na[Al(OH)₄](aq)

2Na[Al(OH)₄](aq) + 2CO₂(g) → Al₂O₃·3H₂O(s) + 2NaHCO₃(aq)

Types of leaching

  • Cyanide leaching
    • Gold and silver
    • Aerated dilute NaCN
    • Metal recovered by zinc (cementation)
  • Ammonia leaching
    • Nickel, copper, cobalt
    • Soluble ammine complexes
  • Alkali leaching
    • Bauxite with NaOH
    • Gives Na[Al(OH)₄]; Fe and Ti oxides left
  • Acid leaching
    • ZnS, PbS with hot H₂SO₄ and O₂
    • Soluble sulphate + sulphur

Roasting and calcination

  • Roasting
    • Heated in excess air
    • Mainly sulphide ores
    • Gas given off: SO₂ (and volatile oxides of As, P)
    • Example: 2ZnS + 3O₂ → 2ZnO + 2SO₂
  • Calcination
    • Heated without air or with little air
    • Carbonate and hydrated ores
    • Gas given off: CO₂ or water vapour
    • Example: ZnCO₃ → ZnO + CO₂

Key takeaways: leaching dissolves the metal as a soluble complex or salt; cyanide leaching is a redox process and zinc recovers the gold. Roasting (excess air) suits sulphides; calcination (no air) suits carbonates and hydrated ores; both give oxides ready for reduction.

Read the full lesson

Lesson 3

Reduction of metal oxides: smelting, carbon, hydrogen and metals

Extraction of copper from copper pyrites

  1. Froth flotation Concentrates the sulphide ore.
  2. Reverberatory furnace with silica Iron removed as FeSiO₃ slag; copper matte (Cu₂S + FeS) forms.
  3. Converter with air Remaining FeS slagged; Cu₂S partly oxidised to Cu₂O.
  4. Self-reduction 2Cu₂O + Cu₂S → 6Cu + SO₂ gives blister copper.
  5. Refining Electrolytic refining gives pure copper (lesson 5).

Cr₂O₃ + 2Al → 2Cr + Al₂O₃ (check: Cr 2 = 2; Al 2 = 2; O 3 = 3)

Methods of reducing a metal oxide

  • Smelting
    • Ore + reducing agent + flux, melted
    • Fe₂O₃ with CO; slag CaSiO₃
  • Carbon (coke)
    • Metals that form no carbide
    • ZnO, Mn₃O₄, Cr₂O₃
  • Hydrogen or water gas
    • Ag₂O, Fe₃O₄, NiO
  • Reactive metal
    • Aluminothermy: Cr₂O₃ + 2Al
    • Na, Mg, Ca for B₂O₃, TiO₂, ThO₂
  • Auto-reduction
    • No reducing agent added
    • HgS + O₂ → Hg + SO₂

Key takeaways: flux + gangue → slag, acid with base. Copper: matte → converter → blister copper by self-reduction. Carbon works for metals that form no carbide; hydrogen for less reactive metals; aluminium and active metals for stable oxides; HgS reduces itself.

Read the full lesson

Lesson 4

Thermodynamic principle of metallurgy and the Ellingham diagram

ΔG = ΔH − TΔS, and ΔG° = −RT ln K. A reduction is feasible when ΔG°(coupled) = ΔG°(oxide of reducing agent) − ΔG°(metal oxide) is negative.

Why the lines slope as they do

  • Metal + O₂ → metal oxide
    • Gas consumed, solid formed
    • ΔS° negative
    • Slope (−ΔS°) positive: line rises
    • Oxide less stable when hot
  • 2C + O₂ → 2CO
    • 1 mol gas gives 2 mol gas
    • ΔS° positive
    • Slope negative: line falls
    • CO more stable when hot
  • C + O₂ → CO₂
    • 1 mol gas gives 1 mol gas
    • ΔS° almost zero
    • Line almost flat

Using the Ellingham diagram to plan a reduction

  1. Find the metal-oxide line Per mole of O₂, at the planned temperature.
  2. Find the reducing agent's line C → CO, CO → CO₂, Al → Al₂O₃ and so on.
  3. Compare positions Reducing agent's line must lie below the metal-oxide line.
  4. Read the crossing temperature Work above it, so ΔG° of the coupled reaction is negative.

Key takeaways: feasibility needs ΔG°(coupled) < 0. Lines are per mole of O₂ with slope −ΔS°; metal-oxide lines rise, the C → CO line falls. A lower line reduces a higher one; the crossing point gives the minimum temperature. Thermodynamics says nothing about speed.

Read the full lesson

Lesson 5

Electrochemical extraction, refining of metals and their uses

ΔG° = −nFE°, where n = electrons transferred, F = 96,485 C mol⁻¹ (the faraday), E° = standard emf of the cell reaction.

Refining methods and the metals they suit

  • Distillation
    • Volatile metals
    • Zn, Hg
  • Liquation
    • Low-melting metals
    • Sn, Pb, Hg, Bi
  • Electrolytic refining
    • Impure anode, pure cathode
    • Ag, Cu, Zn
  • Zone refining
    • Ultrapure semiconductors
    • Ge, Si, Ga
  • Vapour phase
    • Mond: Ni
    • Van Arkel: Ti, Zr
MetalImportant uses (from the Tamil Nadu textbook)
AluminiumCooking vessels, heat exchangers and sinks; foil for packing food; light strong alloys (with Cu, Mn, Mg, Si) for aircraft; chemical reactors, medical equipment, refrigeration units, gas pipelines; overhead cables with a steel core
ZincGalvanising iron and steel; die-castings; ZnO in paints, rubber, cosmetics, medicines, plastics, inks and batteries; ZnS in luminous paints, fluorescent lights and X-ray screens; brass for water valves
IronBridges, pylons, bicycle chains, tools; cast iron pipes, valves and stoves; magnets; stainless steel cutlery and surgical instruments; nickel steel for cables and aircraft parts; chrome steel for cutting tools
CopperThe first metal used by humans (its alloy bronze gave the Bronze Age); coins and ornaments; wires, water pipes and electrical parts
GoldCoinage and jewellery (alloyed with copper); electroplating of watches, electrical connectors and dental work; gold nanoparticles as catalysts and in solar cells

Key takeaways: positive E° means negative ΔG° and a feasible reduction. In the Hall-Héroult cell Al³⁺ is reduced at the carbon-lined cathode and the carbon anodes burn away. Refining: distil volatile metals, liquate low-melting ones, electrolyse with an impure anode, zone-refine semiconductors, and use volatile compounds for Ni (Mond) and Ti or Zr (Van Arkel).

Read the full lesson

Privacy · Terms · Refunds · Delivery