- Practice
- About 26 min
- 5 practice questions
Alcohols: classification, naming, preparation and tests for 1°, 2° and 3° alcohols
Classify and name alcohols by IUPAC rules, describe the structure of the C-O-H group, prepare alcohols from alkyl halides, alkenes, Grignard reagents, hydroboration and reduction, and tell primary, secondary and tertiary alcohols apart.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify alcohols by the number of OH groups and by the carbon that carries the OH group.
- Name alcohols by IUPAC rules and describe the shape of the C-O-H group.
- Choose a method and reagents to prepare a given alcohol, including glycol and glycerol.
- Distinguish primary, secondary and tertiary alcohols by the Lucas test and Victor Meyer's test.
Compounds with an -OH group are everywhere: cholesterol in cell membranes, retinol (a form of vitamin A) for vision, ethanol mixed with petrol, isopropyl alcohol swabs used before an injection, glycerol in soaps. The OH group can also be turned into many other functional groups, which makes alcohols central to organic synthesis. Unit 11 of the Tamil Nadu textbook covers alcohols, phenols and ethers.
Classifying alcohols
Classification of alcohols
-
By number of OH groups
- Monohydric: one OH, e.g. ethanol
- Dihydric: glycol, HOCH₂CH₂OH (ethane-1,2-diol)
- Trihydric: glycerol, HOCH₂CH(OH)CH₂OH (propane-1,2,3-triol)
- Hexahydric: sorbitol, HOCH₂(CHOH)₄CH₂OH
-
OH on an sp³ carbon
- 1°: CH₃CH₂OH (ethanol)
- 2°: (CH₃)₂CHOH (propan-2-ol)
- 3°: (CH₃)₃COH (2-methylpropan-2-ol)
- Also allylic (CH₂=CH-CH₂OH) and benzylic (C₆H₅CH₂OH) alcohols
-
OH on an sp² carbon
- Vinylic alcohols, e.g. ethenol CH₂=CH-OH
- Phenols: OH on a benzene ring (lesson 4)
A primary (1°) alcohol has its OH on a carbon bonded to one other carbon (or none, as in methanol); secondary (2°) on a carbon bonded to two carbons; tertiary (3°) on a carbon bonded to three carbons.
IUPAC names
- Choose the longest continuous carbon chain that contains the carbon bearing -OH (root word).
- Number the chain so that the carbon bearing -OH gets the lowest possible number.
- Name and number the substituents.
- Write: prefix (substituents) + root + primary suffix (-ane, -ene) + secondary suffix (-ol), dropping the final 'e' of -ane before -ol.
| Common name | Structure | IUPAC name | Type |
|---|---|---|---|
| Isopropyl alcohol | CH₃CH(OH)CH₃ | Propan-2-ol | 2° |
| Tertiary butyl alcohol | (CH₃)₃COH | 2-Methylpropan-2-ol | 3° |
| Isobutyl alcohol | (CH₃)₂CHCH₂OH | 2-Methylpropan-1-ol | 1° |
| Neopentyl alcohol | (CH₃)₃CCH₂OH | 2,2-Dimethylpropan-1-ol | 1° |
| Allyl alcohol | CH₂=CHCH₂OH | Prop-2-en-1-ol | 1° |
| Benzyl alcohol | C₆H₅CH₂OH | Phenylmethanol | 1° |
| Cyclohexyl alcohol | C₆H₁₁OH | Cyclohexanol | 2° |
Worked example 1: the four alcohols C₄H₁₀O
C₄H₁₀O fits CₙH₂ₙ₊₂O, so it could be a saturated alcohol. The alcohols are: CH₃CH₂CH₂CH₂OH, butan-1-ol (1°); CH₃CH₂CH(OH)CH₃, butan-2-ol (2°); (CH₃)₂CHCH₂OH, 2-methylpropan-1-ol (1°); (CH₃)₃COH, 2-methylpropan-2-ol (3°). Each has 4 C, 10 H and 1 O. (Ethers with the same formula, such as ethoxyethane, are lesson 5.)
Structure of the C-O-H group
In an alcohol with the OH on an sp³ carbon, oxygen is sp³ hybridised. One sp³ orbital of oxygen overlaps an sp³ orbital of carbon (C-O σ bond), a second overlaps the 1s orbital of hydrogen (O-H σ bond), and the other two hold lone pairs. Like water, the group is V-shaped; lone pair repulsion squeezes the C-O-H angle in methanol to 108.9°, a little less than the tetrahedral 109.5°.
Preparing alcohols
- From alkyl halides: heating with dilute aqueous NaOH, R-X + NaOH(aq) → R-OH + NaX. Primary halides react by SN2; secondary and tertiary usually by SN1 (tert-butyl bromide goes through the tert-butyl carbocation).
- From alkenes (acid-catalysed hydration): water adds across C=C in the presence of concentrated H₂SO₄ by Markownikoff's rule: CH₃CH=CH₂ + H₂O → CH₃CH(OH)CH₃ (propan-2-ol).
- From Grignard reagents: RMgX adds to the C=O of an aldehyde or ketone in dry ether; acid hydrolysis gives the alcohol. Methanal gives a 1° alcohol, other aldehydes 2°, ketones 3°. A formate ester (HCOOR') with two moles of RMgX gives a 2° alcohol with two identical R groups.
- Hydroboration-oxidation: 6CH₃CH=CH₂ + B₂H₆ → 2(CH₃CH₂CH₂)₃B; then (CH₃CH₂CH₂)₃B + 3H₂O₂ → 3CH₃CH₂CH₂OH + B(OH)₃ in the presence of OH⁻. The net result is hydration with anti-Markownikoff orientation (propan-1-ol, not propan-2-ol).
- Reduction of carbonyl compounds: LiAlH₄ in THF, then water, reduces aldehydes, ketones, acids and esters to alcohols: acetone → propan-2-ol; benzoic acid → phenylmethanol; ethyl ethanoate → 2 ethanol. LiAlH₄ does not reduce a C=C bond, so crotonaldehyde (but-2-enal) gives crotyl alcohol (but-2-en-1-ol). The milder NaBH₄ reduces a ketone C=O but leaves a COOH group untouched.
Worked example 2: planning a Grignard synthesis
Make 2-methylbutan-2-ol, (CH₃)₂C(OH)CH₂CH₃, a 3° alcohol. Working: a 3° alcohol needs a ketone. Split one bond to the carbinol carbon: removing the ethyl group leaves propanone (CH₃COCH₃), so use ethylmagnesium bromide + propanone: CH₃CH₂MgBr + CH₃COCH₃ → (CH₃)₂C(OMgBr)CH₂CH₃, then hydrolysis gives (CH₃)₂C(OH)CH₂CH₃ + Mg(OH)Br. Removing a methyl instead gives butanone + CH₃MgBr, which also works. Check carbons: 2 (ethyl) + 3 (propanone) = 5, as in C₅H₁₂O.
Glycol and glycerol
Glycol is made by hydroxylating ethene with cold, dilute alkaline KMnO₄ (Baeyer's reagent): CH₂=CH₂ + H₂O + [O] → HOCH₂-CH₂OH. Glycerol occurs in fats and oils as glyceryl esters of long-chain fatty acids (triglycerides). Alkaline hydrolysis (saponification) frees it: glyceryl tripalmitate + 3NaOH → glycerol + 3C₁₅H₃₁COONa (sodium palmitate, a soap).
Telling 1°, 2° and 3° alcohols apart
Lucas test. Lucas reagent is concentrated HCl with anhydrous ZnCl₂. The alkyl chloride formed is insoluble and makes the solution turbid. At room temperature a 3° alcohol gives turbidity at once, a 2° alcohol within about 10 minutes (according to the textbook), and a 1° alcohol not at all (only on heating). The order follows the ease of forming a carbocation: 3° > 2° > 1°.
Victor Meyer's test. The alcohol is converted to an alkyl iodide (P/I₂), then to a nitroalkane (AgNO₂), which is treated with nitrous acid (NaNO₂ + HCl) and made alkaline with KOH. A 1° alcohol gives a red colour (via a nitrolic acid), a 2° alcohol a blue colour (via a pseudonitrole), and a 3° alcohol no colour, because its nitroalkane has no α-hydrogen to react with HNO₂.
Results of the two tests
-
Primary alcohol
- Lucas: no turbidity at room temperature
- Victor Meyer: red colour
-
Secondary alcohol
- Lucas: turbidity within minutes
- Victor Meyer: blue colour
-
Tertiary alcohol
- Lucas: turbidity at once
- Victor Meyer: colourless
Key takeaways: alcohols are 1°, 2° or 3° by the carbon bearing OH. Prepare them from alkyl halides, by hydration (Markownikoff) or hydroboration (anti-Markownikoff), from Grignard reagents (HCHO → 1°, RCHO → 2°, ketone → 3°) or by LiAlH₄/NaBH₄ reduction. Lucas and Victor Meyer tests tell the three classes apart.
Check your understanding
-
1. What is the IUPAC name of (CH₃)₃C-CH₂-OH?
- 2,2-Dimethylpropan-1-ol
- 2-Methylbutan-1-ol
- 1,1-Dimethylpropan-1-ol
- Pentan-1-ol
Show answer
Answer: A. The longest chain containing the carbon with OH has 3 carbons (propane), numbered from the CH₂OH end so the OH is on C-1; two methyl groups sit on C-2. Name: 2,2-dimethylpropan-1-ol (neopentyl alcohol).
-
2. Which carbonyl compound reacts with CH₃MgBr, followed by hydrolysis, to give a tertiary alcohol?
- Methanal
- Ethanal
- Propanone
- Benzaldehyde
Show answer
Answer: C. Ketones give tertiary alcohols: CH₃MgBr + CH₃COCH₃ → (CH₃)₃COMgBr, which hydrolyses to 2-methylpropan-2-ol. Methanal gives a 1° alcohol and other aldehydes give 2° alcohols.
-
3. Propene is treated with B₂H₆ and then with H₂O₂ in alkali. The product is
- propan-2-ol
- propan-1-ol
- propane-1,2-diol
- propanal
Show answer
Answer: B. Hydroboration-oxidation adds H and OH across the double bond with anti-Markownikoff orientation: OH goes to the end carbon, giving propan-1-ol. Acid-catalysed hydration would give propan-2-ol.
-
4. Which reagent converts but-2-enal into but-2-en-1-ol without reducing the C=C bond?
- H₂ with Raney nickel
- Na-Hg and water
- Acidified K₂Cr₂O₇
- LiAlH₄ followed by water
Show answer
Answer: D. LiAlH₄ delivers hydride to the polar C=O bond but does not reduce a C=C bond, so the unsaturated alcohol is obtained. Raney Ni with H₂ would also saturate the C=C bond, and dichromate is an oxidising agent.
-
5. An alcohol gives turbidity immediately with Lucas reagent at room temperature and no colour in Victor Meyer's test. It is
- butan-1-ol
- butan-2-ol
- 2-methylpropan-2-ol
- methanol
Show answer
Answer: C. Both results point to a tertiary alcohol: it forms a stable 3° carbocation at once with Lucas reagent, and its nitroalkane has no α-hydrogen, so Victor Meyer's test is colourless. 2-Methylpropan-2-ol is the only 3° alcohol listed.
Sign in to keep track of the lessons you finish.