- Practice
- About 28 min
- 5 practice questions
Phenols: acidity, preparation and reactions
Explain why phenol is more acidic than alcohols and how substituents change its acidity, prepare phenol by Dow's, sulphonic acid, diazonium and cumene methods, and describe its reactions at the OH group and the ring, tests and uses.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify and name phenols.
- Explain the acidity of phenol by resonance and predict the effect of nitro and alkyl substituents using pKa values.
- Describe four methods of preparing phenol.
- Write the reactions of the OH group and the electrophilic substitution reactions of the ring, and distinguish phenol from alcohols.
Phenol (carbolic acid) was one of the first antiseptics, and it is the starting point for Bakelite, aspirin, salol, picric acid and phenolphthalein. Its -OH group is attached directly to a benzene ring, through an sp² carbon, and that changes its behaviour sharply from that of an alcohol.
Classifying phenols
| Type | Common name | IUPAC name |
|---|---|---|
| Monohydric | Phenol | Phenol |
| Monohydric | o-, m-, p-Cresol | 2-, 3-, 4-Methylphenol |
| Dihydric | Catechol, resorcinol, quinol | Benzene-1,2-, 1,3- and 1,4-diol (1,2-, 1,3-, 1,4-dihydroxybenzene) |
| Trihydric | Pyrogallol, hydroxyquinol, phloroglucinol | 1,2,3-, 1,2,4- and 1,3,5-Trihydroxybenzene |
| Substituted | Salicylaldehyde | 2-Hydroxybenzaldehyde |
Acidity of phenol
Phenol is much more acidic than alcohols: unlike them it reacts with NaOH to form sodium phenoxide. In water, C₆H₅OH + H₂O ⇌ C₆H₅O⁻ + H₃O⁺, with Ka = 1 × 10⁻¹⁰ at 25 °C (pKa 10). The reason is the resonance stabilisation of the phenoxide ion: its negative charge spreads from oxygen over the ortho and para carbons of the ring. An alkoxide ion has no such delocalisation.
Substituents. Electron-withdrawing groups (-NO₂, -Cl) increase acidity, most strongly at the ortho and para positions, where a nitro group can share the negative charge by resonance. Electron-releasing alkyl groups (+I effect) decrease acidity.
| Compound | pKa | Compound | pKa |
|---|---|---|---|
| Methanol | 15.5 | Phenol | 10.0 |
| Ethanol | 15.9 | o-Nitrophenol | 7.2 |
| Propan-2-ol | 16.5 | m-Nitrophenol | 8.3 |
| 2-Methylpropan-2-ol | 18.0 | p-Nitrophenol | 7.1 |
| Cyclohexanol | 18.0 | o-, m-, p-Cresol | 10.2, 10.1, 10.2 |
Worked example 1: comparing acid strengths
How many times stronger an acid is p-nitrophenol than phenol? Working: Ka = 10⁻ᵖᴷᵃ. Ratio = 10⁻⁷·¹ ÷ 10⁻¹⁰·⁰ = 10²·⁹ ≈ 794 times. And phenol against ethanol: 10⁻¹⁰·⁰ ÷ 10⁻¹⁵·⁹ = 10⁵·⁹ ≈ 7.9 × 10⁵ times. A difference of one pKa unit means a factor of 10 in Ka.
Preparing phenol
- Dow's process (from chlorobenzene): chlorobenzene is heated with 6-8% NaOH at 633 K and 300 bar (the textbook's conditions) in a closed vessel to give sodium phenoxide; dilute HCl then gives phenol: C₆H₅Cl + 2NaOH → C₆H₅ONa + NaCl + H₂O; C₆H₅ONa + HCl → C₆H₅OH + NaCl.
- From benzenesulphonic acid: benzene is sulphonated with oleum; the sulphonic acid is fused with molten NaOH at 623 K to give sodium phenoxide, which is acidified.
- From aniline: aniline is diazotised with NaNO₂ + HCl at 273-278 K to benzenediazonium chloride, which is warmed with water (acid present): C₆H₅N₂⁺Cl⁻ + H₂O → C₆H₅OH + N₂ + HCl.
- From cumene: benzene and propene at 523 K with H₃PO₄ give cumene (isopropylbenzene); air oxidation (with 5% aqueous Na₂CO₃) gives cumene hydroperoxide, C₆H₅C(CH₃)₂OOH, which dilute acid splits into phenol and acetone, a valuable by-product.
The cumene route to phenol
- Benzene + propene H₃PO₄, 523 K
- Cumene isopropylbenzene
- Cumene hydroperoxide air (O₂), aqueous Na₂CO₃
- Phenol + acetone dilute acid splits the hydroperoxide
Physical properties
Phenol forms colourless, needle-shaped, hygroscopic crystals; it is corrosive and poisonous and turns pink in air and light. Simple phenols are liquids or low-melting solids with fairly high boiling points (hydrogen bonding). Phenol is slightly soluble in water.
Reactions of the OH group
- Zinc dust: C₆H₅OH + Zn → C₆H₆ + ZnO (heated).
- Ammonia with anhydrous ZnCl₂: C₆H₅OH + NH₃ → C₆H₅NH₂ (aniline) + H₂O.
- Esters (Schotten-Baumann reaction): with acetyl chloride or benzoyl chloride in NaOH or pyridine: C₆H₅OH + CH₃COCl → CH₃COOC₆H₅ (phenyl ethanoate) + HCl; with C₆H₅COCl, phenyl benzoate.
- Ethers (Williamson synthesis): C₆H₅OH + NaOH → C₆H₅ONa + H₂O, then C₆H₅ONa + CH₃I → C₆H₅OCH₃ (anisole, methoxybenzene) + NaI.
- Oxidation: air, or acidified K₂Cr₂O₇ with conc. H₂SO₄, gives 1,4-benzoquinone.
- Reduction: C₆H₅OH + 3H₂ → C₆H₁₁OH (cyclohexanol) over Ni at about 160 °C.
Electrophilic substitution on the ring
The -OH group strongly activates the ring and directs incoming electrophiles to the ortho and para positions, because its lone pair feeds electron density into the ring.
- Nitrosation: HNO₂ at 278 K gives p-nitrosophenol.
- Nitration: dilute (20%) HNO₃ at room temperature gives a mixture of o- and p-nitrophenol; they are separated by steam distillation, since o-nitrophenol has intramolecular hydrogen bonding and is volatile, while p-nitrophenol is held by intermolecular hydrogen bonds. Concentrated HNO₃ with conc. H₂SO₄ gives 2,4,6-trinitrophenol (picric acid).
- Sulphonation: conc. H₂SO₄ at 280 K gives mainly o-phenolsulphonic acid; at 373 K mainly the para acid.
- Bromination: bromine water gives a white precipitate of 2,4,6-tribromophenol at once: C₆H₅OH + 3Br₂ → C₆H₂Br₃OH + 3HBr; in CS₂ or CCl₄ at 278 K a mixture of o- and p-bromophenol forms.
- Kolbe (Kolbe-Schmitt) reaction: sodium phenoxide + CO₂ at 400 K and 4-7 bar gives sodium salicylate; acid gives salicylic acid (2-hydroxybenzoic acid).
- Reimer-Tiemann reaction: CHCl₃ and aqueous NaOH put a -CHO group at the ortho position through a dichloromethyl (benzal chloride type) intermediate, giving salicylaldehyde after acidification.
- Phthalein reaction: two phenols + phthalic anhydride (conc. H₂SO₄) → phenolphthalein + water.
- Coupling: with benzenediazonium chloride in alkali at 273-278 K, phenol gives p-hydroxyazobenzene, a red-orange dye.
Worked example 2: tribromophenol by mass
What mass of 2,4,6-tribromophenol forms from 0.94 g of phenol with excess bromine water? (C = 12, H = 1, O = 16, Br = 80.) Working: M(C₆H₅OH) = 72 + 6 + 16 = 94 g mol⁻¹, so moles = 0.94 ÷ 94 = 0.010 mol. C₆H₂Br₃OH: C 72 + H 3 + Br 240 + O 16 = 331 g mol⁻¹. One mole of phenol gives one mole of product, so mass = 0.010 × 331 = 3.31 g.
Distinguishing phenol from alcohols, and uses
- Phenol gives a violet (purple) colour with neutral FeCl₃ solution; alcohols do not.
- Phenol couples with benzenediazonium chloride to give a red-orange dye; ethanol does not.
- Phenol dissolves in NaOH to form sodium phenoxide; ethanol does not react with NaOH.
Uses: a large share of phenol goes into phenol-formaldehyde resin (Bakelite); it is the starting material for drugs such as phenacetin, salol and aspirin, for phenolphthalein and for picric acid; it is used as an antiseptic in carbolic lotions and soaps.
Key takeaways: phenol (pKa 10) is far more acidic than alcohols (pKa 15.5-18) because phenoxide is resonance-stabilised; o/p-NO₂ groups raise acidity and alkyl groups lower it. Phenol is made by Dow's, sulphonate fusion, diazonium and cumene routes. The OH strongly activates the ring for o/p substitution: bromine water gives 2,4,6-tribromophenol, Kolbe gives salicylic acid, Reimer-Tiemann gives salicylaldehyde.
Check your understanding
-
1. Why is phenol more acidic than ethanol?
- Phenol has more hydrogen atoms.
- The phenoxide ion is stabilised by resonance, while the ethoxide ion is not.
- Ethanol is an ionic compound.
- Phenol has a lower molar mass.
Show answer
Answer: B. In phenoxide the negative charge spreads from oxygen over the ring's ortho and para carbons, which stabilises the ion and favours its formation. In ethoxide the charge stays on oxygen and is even intensified by the ethyl group.
-
2. Which is the strongest acid?
- Phenol
- p-Cresol
- m-Nitrophenol
- p-Nitrophenol
Show answer
Answer: D. A para nitro group withdraws electrons by both induction and resonance and delocalises the phenoxide charge onto itself, giving the lowest pKa (7.1). m-Nitrophenol (8.3) can use only induction, phenol is 10.0, and the methyl group in p-cresol lowers acidity (10.2).
-
3. In the cumene process, the by-product formed along with phenol is
- acetone
- acetaldehyde
- benzaldehyde
- propene
Show answer
Answer: A. Cumene hydroperoxide, C₆H₅C(CH₃)₂OOH, is split by dilute acid into phenol and acetone (propanone), which is itself a valuable product.
-
4. Phenol reacts with bromine water. What is observed and formed?
- No reaction without a catalyst
- Only o-bromophenol
- A white precipitate of 2,4,6-tribromophenol
- Bromobenzene and water
Show answer
Answer: C. The OH group activates the ring so strongly that, in water, all three ortho and para positions are brominated at once without a catalyst: C₆H₅OH + 3Br₂ → C₆H₂Br₃OH + 3HBr, a white precipitate.
-
5. Phenol is heated with CHCl₃ and aqueous NaOH, then acidified. The main product is
- salicylic acid
- salicylaldehyde
- benzaldehyde
- phenyl ethanoate
Show answer
Answer: B. This is the Reimer-Tiemann reaction: a -CHO group is introduced at the ortho position, giving 2-hydroxybenzaldehyde (salicylaldehyde). Salicylic acid comes from the Kolbe reaction with CO₂.
Sign in to keep track of the lessons you finish.