- Practice
- About 26 min
- 5 practice questions
Oxidation, esterification and acidity of alcohols; glycol and glycerol
Predict the oxidation products of 1°, 2° and 3° alcohols with dichromate, PCC, Swern reagents, copper and alcohol dehydrogenase, write esterification, explain the acidity order of alcohols, and describe the reactions and uses of glycol, glycerol and other alcohols.
If something looks wrong, please tell us.
By the end of this lesson you can
- Predict the oxidation and dehydrogenation products of 1°, 2° and 3° alcohols.
- Write the esterification of an alcohol with a carboxylic acid.
- Write the reactions of glycol and glycerol, including periodic acid cleavage, nitration and dehydration.
- Explain why alcohols are weakly acidic, why acidity falls from 1° to 3°, and calculate hydrogen evolved with sodium.
The liver turns drinking alcohol into ethanal; a breath analyser once used the colour change of dichromate; nitroglycerine, made from glycerol, is both an explosive and a heart medicine. All of these depend on the reactions in this lesson.
Oxidation of alcohols
The usual oxidising agent is acidified sodium (or potassium) dichromate. A 1° alcohol is oxidised to an aldehyde and then on to a carboxylic acid: CH₃CH₂OH → CH₃CHO (ethanal) → CH₃COOH (ethanoic acid). A 2° alcohol gives a ketone: CH₃CH(OH)CH₃ → CH₃COCH₃ (propanone), which strong oxidation can break further into an acid with fewer carbons, such as ethanoic acid. A 3° alcohol has no H on the carbinol carbon and is not oxidised under normal conditions; strong oxidising agents at high temperature break C-C bonds and give a mixture of acids.
PCC (pyridinium chlorochromate) stops the oxidation at the aldehyde (or ketone) stage: CH₃CH₂CH₂OH → CH₃CH₂CHO (propanal). Swern oxidation uses dimethyl sulphoxide with oxalyl chloride, followed by triethylamine: (CH₃)₂CHOH + (CH₃)₂SO + (COCl)₂ → (CH₃)₂CO + (CH₃)₂S + CO₂ + CO + 2HCl (check: C 7, H 14, O 4, S 1, Cl 2 on each side).
Biological oxidation. The liver detoxifies ethanol with the enzyme alcohol dehydrogenase (ADH), using NAD⁺ as the oxidising agent: CH₃CH₂OH + NAD⁺ → CH₃CHO + NADH + H⁺.
Catalytic dehydrogenation. Vapour of a 1° or 2° alcohol passed over copper at 573 K loses hydrogen: CH₃CH₂OH → CH₃CHO + H₂; CH₃CH(OH)CH₃ → CH₃COCH₃ + H₂. A 3° alcohol is dehydrated instead: (CH₃)₃COH → (CH₃)₂C=CH₂ + H₂O. This is another way to tell the three classes apart.
| Alcohol | Acidified dichromate | PCC | Cu at 573 K |
|---|---|---|---|
| 1°, RCH₂OH | RCHO, then RCOOH | RCHO | RCHO + H₂ |
| 2°, R₂CHOH | R₂C=O (ketone) | R₂C=O | R₂C=O + H₂ |
| 3°, R₃COH | No reaction normally | No reaction | Alkene + H₂O |
Esterification
Alcohols react with carboxylic acids in the presence of an acid catalyst to give esters: CH₃CH₂OH + CH₃COOH ⇌ CH₃COOCH₂CH₃ (ethyl ethanoate) + H₂O. The reaction is reversible; removing water drives it forward.
Reactions of glycol
- With sodium it forms monosodium and then disodium glycolate; with HX, PCl₅, PCl₃ or SOCl₂ the OH groups become halides.
- With HI or P/I₂, 1,2-diiodoethane forms first and then loses I₂ to give ethene.
- With conc. HNO₃ and conc. H₂SO₄ it forms glycol dinitrate (dinitroglycol), O₂NOCH₂CH₂ONO₂.
- Dehydration depends on conditions: at 773 K the textbook gives oxirane (epoxyethane); with dilute H₂SO₄ or anhydrous ZnCl₂ in a sealed tube, ethenol forms and tautomerises to ethanal; distilled with conc. H₂SO₄, two molecules lose 2H₂O to give 1,4-dioxane.
- Oxidation with HNO₃ or alkaline KMnO₄ gives in turn glycolaldehyde, glycolic acid, glyoxal, glyoxylic acid and oxalic acid.
- Periodic acid cleaves the C-C bond of a 1,2-diol through a cyclic periodate ester: HOCH₂CH₂OH + HIO₄ → 2HCHO + HIO₃ + H₂O (check: C 2, H 7, O 6, I 1 on each side). The reaction is selective for vicinal diols.
Reactions of glycerol
- Nitration: glycerol + 3HNO₃ (conc. H₂SO₄) → glyceryl trinitrate (nitroglycerine, TNG) + 3H₂O.
- Dehydration with KHSO₄ or conc. H₂SO₄: C₃H₈O₃ → CH₂=CH-CHO (acrolein, prop-2-enal) + 2H₂O.
- Oxidation depends on the reagent: dilute HNO₃ gives glyceric and tartronic acids; concentrated HNO₃ mainly glyceric acid; bismuth nitrate mesoxalic acid; Br₂ water, NaOBr or Fenton's reagent a mixture of glyceraldehyde and dihydroxyacetone (glycerose); HIO₄ or lead tetraacetate formaldehyde and formic acid; acidified KMnO₄ oxalic acid.
Worked example 1: periodic acid on glycerol
HOCH₂-CH(OH)-CH₂OH has two adjacent C-C bonds between OH-bearing carbons. HIO₄ cuts both: each end CH₂OH becomes HCHO and the middle CHOH, cut on both sides, becomes HCOOH. Products: 2HCHO + HCOOH, using 2HIO₄: C₃H₈O₃ + 2HIO₄ → 2HCHO + HCOOH + 2HIO₃ + H₂O. Check: C 3 = 2 + 1; H 8 + 2 = 10 and 4 + 2 + 2 + 2 = 10; O 3 + 8 = 11 and 2 + 2 + 6 + 1 = 11; I 2 = 2.
Uses of alcohols
- Methanol: solvent for paints, varnishes, shellac and gums; making formaldehyde, dyes, drugs and perfumes.
- Ethanol: making paints and varnishes, ether, chloroform, iodoform, dyes and transparent soaps; mixed with petrol as power alcohol; preserving biological specimens.
- Ethylene glycol: antifreeze in car radiators; its dinitrate is used with TNG in explosives.
- Glycerol: sweetening agent in confectionery and drinks; cosmetics and transparent soaps; printing and stamp-pad inks; lubricant for watches and clocks; its trinitrate (nitroglycerine) is used in dynamite and cordite.
Acidity of alcohols
By the Bronsted definition, an alcohol is a very weak acid, comparable with water: according to the textbook Ka of water is 1.8 × 10⁻¹⁶ and Ka of alcohols lies between about 10⁻¹⁶ and 10⁻¹⁸, so all except methanol are weaker acids than water. Alcohols react with active metals to give alkoxides and hydrogen, 2C₂H₅OH + 2Na → 2C₂H₅ONa + H₂, but not with NaOH.
Order: 1° > 2° > 3°. Electron-releasing alkyl groups push electron density onto the oxygen, make the O-H bond less polar and destabilise the alkoxide ion, so each extra alkyl group on the carbinol carbon lowers the acidity. The textbook gives Ka values of 1.3 × 10⁻¹⁶ for ethanol, 3.2 × 10⁻¹⁷ for propan-2-ol and 1 × 10⁻¹⁸ for 2-methylpropan-2-ol. Electron-withdrawing groups such as -Cl or -F on the carbon raise the acidity. Through the lone pairs on oxygen, alcohols are also weak Bronsted bases: CH₃CH₂OH + H⁺ → CH₃CH₂OH₂⁺.
Worked example 2: hydrogen from sodium
1.48 g of a butanol (C₄H₉OH, molar mass 74 g mol⁻¹) reacts completely with sodium. What volume of hydrogen forms at 273 K and 1 atm (22.4 L mol⁻¹)? Working: moles of alcohol = 1.48 ÷ 74 = 0.020 mol. From 2ROH + 2Na → 2RONa + H₂, 2 mol alcohol give 1 mol H₂, so H₂ = 0.020 ÷ 2 = 0.010 mol. Volume = 0.010 × 22.4 L = 0.224 L = 224 mL.
Key takeaways: dichromate oxidises 1° alcohols to aldehydes then acids and 2° to ketones; 3° resist. PCC and Swern stop at the aldehyde; Cu at 573 K dehydrogenates 1° and 2° but dehydrates 3°. HIO₄ cleaves 1,2-diols. Alcohols are weaker acids than water (except methanol), in the order 1° > 2° > 3°.
Check your understanding
-
1. Propan-1-ol is warmed with PCC. The product is
- propanoic acid
- propanal
- propanone
- propene
Show answer
Answer: B. PCC is a mild oxidising agent that stops the oxidation of a 1° alcohol at the aldehyde, CH₃CH₂CHO. Acidified dichromate in excess would continue to propanoic acid.
-
2. Vapours of 2-methylpropan-2-ol are passed over heated copper at 573 K. What is formed?
- 2-Methylpropanal
- Propanone and methane
- 2-Methylpropene and water
- No reaction
Show answer
Answer: C. A tertiary alcohol has no hydrogen on the carbinol carbon, so it cannot be dehydrogenated; over hot copper it is dehydrated instead to the alkene (CH₃)₂C=CH₂.
-
3. Ethane-1,2-diol is treated with periodic acid. The organic product is
- methanal
- ethanal
- oxalic acid
- glyoxal
Show answer
Answer: A. HIO₄ cleaves the C-C bond between the two OH-bearing carbons: HOCH₂-CH₂OH + HIO₄ → 2HCHO + HIO₃ + H₂O, so two molecules of methanal (formaldehyde) are formed.
-
4. Which is the correct order of acid strength?
- 2-Methylpropan-2-ol > propan-2-ol > ethanol
- Propan-2-ol > ethanol > 2-methylpropan-2-ol
- All three are equally acidic
- Ethanol > propan-2-ol > 2-methylpropan-2-ol
Show answer
Answer: D. Each alkyl group on the carbinol carbon releases electrons, makes the O-H bond less polar and destabilises the alkoxide. So acidity falls 1° > 2° > 3°, matching the textbook's Ka values 1.3 × 10⁻¹⁶ > 3.2 × 10⁻¹⁷ > 1 × 10⁻¹⁸.
-
5. What volume of H₂ at 273 K and 1 atm is given when 0.46 g of ethanol (molar mass 46 g mol⁻¹) reacts completely with sodium?
- 224 mL
- 112 mL
- 448 mL
- 22.4 mL
Show answer
Answer: B. Moles of ethanol = 0.46 ÷ 46 = 0.010 mol. 2C₂H₅OH + 2Na → 2C₂H₅ONa + H₂, so H₂ = 0.010 ÷ 2 = 0.0050 mol. Volume = 0.0050 × 22 400 mL = 112 mL.
Sign in to keep track of the lessons you finish.