- Practice
- About 25 min
- 5 practice questions
Ethers: classification, preparation, properties and reactions
Classify and name ethers, explain their structure and physical properties, prepare them by dehydration of alcohols, Williamson synthesis and diazomethane, and predict their cleavage by HI, autoxidation and the ring reactions of anisole.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify ethers as simple or mixed, aliphatic or aromatic, and name them by IUPAC rules.
- Describe the structure of the C-O-C group and compare the boiling points of ethers, alkanes and alcohols.
- Choose the right halide and alkoxide for a Williamson synthesis and explain when elimination wins.
- Predict the products of ethers with HI, the dangers of autoxidation, and the products of electrophilic substitution in anisole.
Diethyl ether was once the classic surgical anaesthetic and is still a common laboratory solvent. Ethers have the general formula R-O-R′: an oxygen atom joined to two alkyl or aryl groups. They are isomeric with alcohols (aliphatic ethers also fit CₙH₂ₙ₊₂O) but behave very differently.
Classification and names
An ether can be seen as a hydrocarbon in which one H is replaced by an alkoxy (-OR) or aryloxy (-OAr) group. In simple (symmetrical) ethers the two groups are the same; in mixed (unsymmetrical) ethers they differ. In aliphatic ethers both groups are alkyl; in aromatic ethers at least one is aryl. In IUPAC names the smaller group with the oxygen becomes the alkoxy prefix on the larger parent.
| Common name | Formula | IUPAC name | Type |
|---|---|---|---|
| Dimethyl ether | CH₃OCH₃ | Methoxymethane | Simple, aliphatic |
| Isopropyl methyl ether | CH₃OCH(CH₃)₂ | 2-Methoxypropane | Mixed, aliphatic |
| tert-Butyl methyl ether | CH₃OC(CH₃)₃ | 2-Methoxy-2-methylpropane | Mixed, aliphatic |
| Anisole | C₆H₅OCH₃ | Methoxybenzene | Mixed, aromatic |
| Phenetole | C₆H₅OC₂H₅ | Ethoxybenzene | Mixed, aromatic |
| Diphenyl ether | C₆H₅OC₆H₅ | Phenoxybenzene | Simple, aromatic |
| Ethylene glycol dimethyl ether | CH₃OCH₂CH₂OCH₃ | 1,2-Dimethoxyethane | Diether |
Structure and physical properties
The ether oxygen is sp³ hybridised: two sp³ orbitals form σ bonds with the two carbons and two hold lone pairs. The C-O-C angle is slightly more than tetrahedral because the bulky alkyl groups repel each other; the textbook gives 111.7° and a C-O bond length of 141 pm for dimethyl ether. Ethers are polar: the two C-O bond dipoles and the lone pairs give a net dipole moment (1.18 D for diethyl ether, according to the textbook).
Ether molecules have no O-H hydrogen, so they cannot hydrogen-bond with each other. Their boiling points are therefore close to those of alkanes and far below those of alcohols of similar mass: the textbook gives n-heptane 371 K, 1-methoxypentane 373 K and hexan-1-ol 430 K. But the ether oxygen can accept hydrogen bonds from water, so lower ethers mix with water to some extent, and ethers dissolve a wide range of polar and non-polar substances.
Preparing ethers
1. Intermolecular dehydration of alcohols. With conc. H₂SO₄ at 443 K ethanol gives ethene, but at 413 K substitution competes and diethyl ether forms: 2CH₃CH₂OH → CH₃CH₂-O-CH₂CH₃ + H₂O. One alcohol molecule is protonated, a second molecule's oxygen attacks its carbon (SN2) and water leaves, then H⁺ is lost. The method suits simple ethers only: a mixture of two alcohols gives three ethers that are hard to separate.
2. Williamson synthesis. An alkyl halide is heated with a sodium alkoxide; the alkoxide ion displaces the halide by SN2: CH₃ONa + CH₃CH₂Br → CH₃OCH₂CH₃ (methoxyethane) + NaBr. Because SN2 works best on primary halides, a mixed ether with a tertiary group is made from the tertiary alkoxide and a primary (or methyl) halide: (CH₃)₃CONa + CH₃Br → (CH₃)₃COCH₃ + NaBr. With a tertiary halide and an alkoxide, the alkoxide acts as a base and β-elimination wins: (CH₃)₃CBr + CH₃ONa → (CH₃)₂C=CH₂ + CH₃OH + NaBr.
3. Methylation with diazomethane. An alcohol and diazomethane, with fluoroboric acid (HBF₄) as catalyst, give a methyl ether: CH₃CH₂OH + CH₂N₂ → CH₃CH₂OCH₃ + N₂.
Worked example 1: choosing Williamson partners
Make 2-ethoxy-2-methylpropane, (CH₃)₃C-O-CH₂CH₃. Working: the two possible disconnections are (a) sodium tert-butoxide + bromoethane, or (b) sodium ethoxide + 2-bromo-2-methylpropane. In (b) the halide is tertiary, so ethoxide would remove a β-hydrogen and give 2-methylpropene. Choose (a): (CH₃)₃CONa + CH₃CH₂Br → (CH₃)₃COCH₂CH₃ + NaBr, an SN2 attack on a primary carbon. Check atoms: C 4 + 2 = 6; product C₆H₁₄O.
Two ways to try a tert-butyl ethyl ether
-
3° alkoxide + 1° halide
- (CH₃)₃CO⁻ attacks CH₃CH₂Br
- SN2 at an unhindered carbon
- Ether formed
- Correct choice
-
1° alkoxide + 3° halide
- CH₃CH₂O⁻ meets (CH₃)₃CBr
- Back-side attack blocked; base removes β-H
- 2-Methylpropene formed
- Elimination wins
Reactions of ethers
Cleavage by HI or HBr (HI is more reactive). The ether oxygen is protonated first. With primary groups the halide ion then attacks the less hindered carbon by SN2: CH₃-O-CH₂CH₃ + HI → CH₃I + CH₃CH₂OH. With a tertiary group the C-O bond to that group breaks by SN1, giving the stable carbocation, so tert-butyl methyl ether gives (CH₃)₃CI and CH₃OH. Aryl alkyl ethers always give a phenol, because the aryl C-O bond is not broken: C₆H₅OCH₃ + HI → C₆H₅OH + CH₃I. With excess HX, the alcohol formed reacts further to a second alkyl halide: CH₃CH₂OH + HBr → CH₃CH₂Br + H₂O.
Ether + HI: 1° groups by SN2 (iodide goes to the smaller group); 3° group by SN1 (iodide goes to the tertiary carbon); aryl alkyl ether gives phenol + alkyl iodide.
Autoxidation. Stored in air, ethers slowly react with oxygen to form hydroperoxides (such as 1-ethoxyethyl hydroperoxide from diethyl ether) and dialkyl peroxides. These are explosive, which is why old ether must never be distilled to dryness.
- Diethyl ether with dilute H₂SO₄ and water (heat, pressure): (C₂H₅)₂O + H₂O → 2C₂H₅OH.
- With PCl₅: (C₂H₅)₂O + PCl₅ → 2C₂H₅Cl + POCl₃.
- With acetyl chloride and anhydrous ZnCl₂: (C₂H₅)₂O + CH₃COCl → C₂H₅Cl + CH₃COOC₂H₅.
- With excess Cl₂ in light, every H is replaced: (C₂H₅)₂O + 10Cl₂ → (CCl₃CCl₂)₂O + 10HCl.
Electrophilic substitution in anisole
The -OCH₃ group activates the ring and directs ortho and para. Anisole is brominated by Br₂ in ethanoic acid even without a catalyst, mainly to p-bromoanisole; nitration with conc. HNO₃/H₂SO₄ gives o- and p-nitroanisole (para major); Friedel-Crafts reactions with anhydrous AlCl₃ give 4-methoxytoluene (with CH₃Cl) or 4-methoxyacetophenone (with CH₃COCl) as the major products, with the ortho isomers as minor products.
Worked example 2: identifying an ether from its HI products
An ether C₃H₈O reacts with one mole of HI to give iodomethane and an alcohol that boils at 351 K. Working: C₃H₈O ethers are methoxyethane (CH₃OC₂H₅) only, since an ether needs carbon on both sides of O and 1 + 2 = 3. HI attacks the less hindered methyl group: CH₃OC₂H₅ + HI → CH₃I + C₂H₅OH. Ethanol (boiling point 351 K) fits. The ether is methoxyethane.
Uses: diethyl ether as an anaesthetic in surgery (in the past), a solvent for reactions and extraction, a volatile starting fluid for diesel and petrol engines, and a refrigerant; anisole in perfumes and insect pheromone synthesis and as a pharmaceutical intermediate.
Key takeaways: ethers R-O-R′ have no O-H, so they boil like alkanes but dissolve in water a little. Make simple ethers by dehydrating alcohols at 413 K and mixed ethers by Williamson synthesis (tertiary alkoxide + primary halide). HI cleaves ethers: SN2 at the smaller group, SN1 at a tertiary group, and aryl ethers give phenols. Ethers form explosive peroxides in air.
Check your understanding
-
1. Why does 1-methoxypentane boil far lower than hexan-1-ol, although their molar masses are almost equal?
- Ethers cannot form hydrogen bonds between their own molecules.
- Ethers are ionic.
- Ethers have no dipole moment.
- Hexan-1-ol has a lower molar mass.
Show answer
Answer: A. An ether has no hydrogen bonded to oxygen, so its molecules cannot hydrogen-bond to each other; only weaker dipole and dispersion forces act. Hexan-1-ol molecules are hydrogen-bonded, which raises the boiling point (430 K against 373 K in the textbook).
-
2. Which pair of reactants gives 2-methoxy-2-methylpropane in good yield?
- Sodium methoxide and 2-bromo-2-methylpropane
- Methanol and 2-methylpropene with NaOH
- Sodium tert-butoxide and bromomethane
- Methanol and tert-butyl alcohol at 443 K
Show answer
Answer: C. Williamson synthesis needs SN2 at an unhindered carbon, so use the tertiary alkoxide with the methyl halide: (CH₃)₃CONa + CH₃Br → (CH₃)₃COCH₃ + NaBr. Sodium methoxide with a tertiary bromide gives mainly 2-methylpropene by elimination.
-
3. Methoxybenzene (anisole) is heated with HI. The products are
- iodobenzene and methanol
- phenol and iodomethane
- benzene and methanol
- iodobenzene and iodomethane
Show answer
Answer: B. The aryl C-O bond has partial double-bond character and an sp² carbon, which iodide cannot attack. So the O-CH₃ bond breaks: C₆H₅OCH₃ + HI → C₆H₅OH + CH₃I.
-
4. Ethoxyethane is heated with excess HI. The final organic product is
- ethanol only
- iodoethane and ethanol
- ethene
- iodoethane only
Show answer
Answer: D. First (C₂H₅)₂O + HI → C₂H₅I + C₂H₅OH. With excess HI, the ethanol is converted too: C₂H₅OH + HI → C₂H₅I + H₂O. So two molecules of iodoethane are the final product.
-
5. Why should a bottle of diethyl ether that has stood in air for a long time never be distilled to dryness?
- Ether polymerises on heating.
- Ether is converted into ethanol.
- Explosive peroxides formed by autoxidation concentrate in the residue.
- Ether reacts with glass.
Show answer
Answer: C. Ethers slowly react with atmospheric oxygen to form hydroperoxides and dialkyl peroxides, which are explosive. They are less volatile than the ether, so they collect in the residue as it is distilled.
Sign in to keep track of the lessons you finish.