- Practice
- About 25 min
- 5 practice questions
Alcohols: physical properties, substitution and elimination reactions
Explain the boiling points and solubility of alcohols, describe nucleophilic substitution of alcohols by SN1 and SN2 with HX, PCl₃ and SOCl₂, and dehydration by E1 and E2, using Saytzeff's rule to predict the major alkene.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why alcohols have high boiling points and why lower alcohols dissolve in water.
- Explain why -OH must be protonated before substitution, and give SN2 and SN1 mechanisms with HBr.
- Write the reactions of alcohols with PCl₃ and SOCl₂.
- Describe acid-catalysed dehydration by E2 and E1, the order of reactivity, carbocation rearrangement and Saytzeff's rule.
Ethanol boils at 351 K, yet propane, with a similar molar mass, is a gas. The reason is hydrogen bonding, and the same polar O-H bond also controls how alcohols react: the C-O bond can break (substitution, elimination) or the O-H bond can break (acidity, esterification).
Physical properties
- Lower alcohols are colourless liquids; higher members are waxy solids.
- Boiling points are much higher than those of alkanes, aldehydes and ethers of similar molar mass, because alcohol molecules are joined by intermolecular hydrogen bonds.
- Among isomeric alcohols, 1° alcohols boil highest and 3° lowest: branching makes molecules more compact, with less surface for intermolecular attraction.
- Lower alcohols are highly soluble in water because they form hydrogen bonds with water molecules; solubility falls as the hydrocarbon part grows.
| Compound | Formula | Molar mass (g mol⁻¹) | Boiling point (K) |
|---|---|---|---|
| Butane | CH₃CH₂CH₂CH₃ | 58 | 272.5 |
| Propanal | CH₃CH₂CHO | 58 | 322 |
| Methoxyethane | CH₃OCH₂CH₃ | 60 | 283.8 |
| Propan-1-ol | CH₃CH₂CH₂OH | 60 | 370.4 |
| Propan-2-ol | CH₃CH(OH)CH₃ | 60 | 355.5 |
Nucleophilic substitution: alcohols to alkyl halides
OH⁻ is a strongly basic, poor leaving group, so an alcohol does not react directly with a nucleophile such as Br⁻. An acid first protonates the oxygen, turning -OH into -OH₂⁺; water is then a good leaving group. With HX: R-OH + HX → R-X + H₂O. Reactivity: 3° > 2° > 1°, and HI > HBr > HCl.
Primary alcohols: SN2. CH₃CH₂OH + HBr: the O is protonated to CH₃CH₂-OH₂⁺; Br⁻ attacks the carbon from the back side while water leaves, in one step: CH₃CH₂OH₂⁺ + Br⁻ → CH₃CH₂Br + H₂O. Tertiary alcohols: SN1. (CH₃)₃C-OH is protonated; water leaves slowly to give the (CH₃)₃C⁺ carbocation (rate-determining); Br⁻ then adds quickly to give 2-bromo-2-methylpropane. The carbocation may also lose H⁺ to form 2-methylpropene, but HBr adds back to that alkene to give the same substitution product.
SN2 and SN1 routes for alcohols with HBr
-
SN2 (primary alcohols)
- Step 1: protonation of OH
- One step: Br⁻ attacks as H₂O leaves
- No carbocation
- Example: ethanol → bromoethane
-
SN1 (tertiary alcohols)
- Step 1: protonation of OH
- Slow: H₂O leaves, 3° carbocation forms
- Fast: Br⁻ adds to the carbocation
- Example: 2-methylpropan-2-ol → 2-bromo-2-methylpropane
Other reagents. Phosphorus trichloride in pyridine: 3CH₃CH₂OH + PCl₃ → 3CH₃CH₂Cl + H₃PO₃ (the alcohol O attacks P, displacing Cl⁻, and Cl⁻ then attacks carbon, an SN2 reaction on the P-activated alcohol). PBr₃ works in the same way. Thionyl chloride in pyridine: CH₃OH + SOCl₂ → CH₃Cl + HCl + SO₂, by the SNi mechanism; both by-products are gases, which leaves the alkyl halide easy to purify.
Worked example 1: checking the PCl₃ equation
3C₂H₅OH + PCl₃ → 3C₂H₅Cl + H₃PO₃. Left: C 6; H 3 × 6 = 18; O 3; P 1; Cl 3. Right: C 6; H 3 × 5 + 3 = 18; O 3; P 1; Cl 3. Balanced. Each Cl of PCl₃ ends up on an ethyl group, and the three OH hydrogens and oxygens end up in phosphorous acid.
Elimination: dehydration to alkenes
Heated with a dehydrating agent such as concentrated H₂SO₄ (or H₃PO₄, anhydrous ZnCl₂ or alumina), an alcohol loses H and OH from adjacent carbons to form a C=C bond: CH₃CH₂OH → CH₂=CH₂ + H₂O with conc. H₂SO₄ at 443 K.
- Primary alcohols: E2. The OH is protonated; then a base (HSO₄⁻ or water) removes a β-hydrogen at the same moment as water leaves, in one step: ethanol → ethene.
- Tertiary alcohols: E1. Step 1, protonation; step 2 (slow), the oxonium ion loses water to form a carbocation; step 3 (fast), loss of a β-H⁺ gives the alkene, for example 2-methylpropan-2-ol → 2-methylprop-1-ene.
- Order of reactivity: 1° < 2° < 3°, the order of carbocation stability.
Saytzeff's rule and rearrangement
When the double bond can form in more than one position, the more highly substituted alkene (the more stable one) is the major product: this is Saytzeff's (Zaitsev's) rule. A carbocation intermediate may also rearrange to a more stable one before losing H⁺.
Saytzeff's rule: in dehydration, hydrogen is lost mainly from the β-carbon that has fewer hydrogens, giving the more substituted, more stable alkene.
Worked example 2: predicting the major alkene
(a) Butan-2-ol, CH₃CH(OH)CH₂CH₃, gives the carbocation CH₃CH⁺CH₂CH₃. Losing H from C-3 gives CH₃CH=CHCH₃, but-2-ene (two alkyl groups on the C=C: major); losing H from C-1 gives CH₂=CHCH₂CH₃, but-1-ene (one alkyl group: minor). (b) 3,3-Dimethylbutan-2-ol first gives a 2° carbocation next to a carbon carrying three methyls. A methyl shift turns it into a more stable 3° carbocation, (CH₃)₂C⁺-CH(CH₃)₂. Losing H⁺ then gives mainly 2,3-dimethylbut-2-ene, (CH₃)₂C=C(CH₃)₂, with four alkyl groups on the double bond. According to the textbook the mixture is about 64% of this alkene, 33% 2,3-dimethylbut-1-ene and 3% 3,3-dimethylbut-1-ene (formed from the unrearranged cation).
E1 dehydration of 3,3-dimethylbutan-2-ol
- Protonation -OH becomes -OH₂⁺
- Loss of water 2° carbocation forms (slow)
- Methyl shift more stable 3° carbocation
- Loss of H⁺ 2,3-dimethylbut-2-ene, the most substituted alkene
Key takeaways: hydrogen bonding gives alcohols high boiling points and water solubility. Substitution needs the OH protonated (or activated by PCl₃, PBr₃, SOCl₂); 1° alcohols react by SN2, 3° by SN1. Dehydration goes by E2 (1°) or E1 (3°), reactivity 3° > 2° > 1°, and Saytzeff's rule picks the more substituted alkene.
Check your understanding
-
1. Why does propan-1-ol (molar mass 60) boil much higher than methoxyethane (molar mass 60)?
- Propan-1-ol has a larger molar mass.
- Propan-1-ol molecules form intermolecular hydrogen bonds.
- Methoxyethane has hydrogen bonding but propan-1-ol does not.
- Methoxyethane is ionic.
Show answer
Answer: B. Propan-1-ol has an O-H group, so its molecules hydrogen-bond to each other, and extra energy is needed to separate them. Methoxyethane has no O-H hydrogen, so it cannot hydrogen-bond with itself. The molar masses are equal.
-
2. Why is an acid needed before an alcohol can undergo nucleophilic substitution with Br⁻?
- The acid makes Br⁻ a stronger nucleophile.
- The acid turns the alcohol into an alkene first.
- Protonation turns -OH into -OH₂⁺, so the leaving group is water instead of the strongly basic OH⁻.
- The acid removes the hydrogen of the OH group.
Show answer
Answer: C. OH⁻ is a poor leaving group. After protonation the group that leaves is a neutral water molecule, which departs easily, so Br⁻ can substitute.
-
3. What is the major product when butan-2-ol is heated with concentrated H₂SO₄?
- But-1-ene
- Butan-1-ol
- Butanone
- But-2-ene
Show answer
Answer: D. Both but-1-ene and but-2-ene can form. By Saytzeff's rule the more substituted alkene, but-2-ene (CH₃CH=CHCH₃, two alkyl groups on the double bond), is the major product.
-
4. Which alcohol is dehydrated most easily by acid?
- 2-Methylpropan-2-ol
- Butan-2-ol
- Butan-1-ol
- Methanol
Show answer
Answer: A. Acid dehydration of a tertiary alcohol goes through the most stable (3°) carbocation by E1, so 3° alcohols dehydrate most easily: 3° > 2° > 1°. Methanol cannot form an alkene at all.
-
5. CH₃OH + SOCl₂ (in pyridine) gives CH₃Cl. What are the other products?
- H₂O and SO₃
- HCl and SO₂
- H₂SO₃ only
- Cl₂ and H₂S
Show answer
Answer: B. CH₃OH + SOCl₂ → CH₃Cl + HCl + SO₂. Check: C 1, H 4, O 2, S 1, Cl 2 on each side. Both by-products are gases, which escape and leave the alkyl halide easy to purify.
Sign in to keep track of the lessons you finish.