• Practice
  • About 24 min
  • 5 practice questions

Amines: classification, naming, structure and preparation

Classify amines as 1°, 2° and 3°, give IUPAC names, explain their pyramidal sp³ structure, prepare amines by reduction, Hoffmann degradation, Gabriel synthesis and ammonolysis, and explain their boiling points.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Classify amines as primary, secondary or tertiary, aliphatic or aromatic, simple or mixed.
  • Name amines by the common and IUPAC systems.
  • Describe the pyramidal shape of amines and compare bond angles.
  • Choose a method to prepare a given amine and explain the boiling points and solubility of amines.

Amines are organic derivatives of ammonia in which one, two or three hydrogens are replaced by alkyl or aryl groups. Dopamine (a neurotransmitter) and histamine are amines; so are many dyes and drugs.

Classification

Classification of amines

  • Primary (1°), R–NH₂
    • Ethanamine, CH₃CH₂NH₂
    • Aniline (benzenamine), C₆H₅NH₂
  • Secondary (2°), R₂NH
    • Simple: N-methylmethanamine, (CH₃)₂NH
    • Mixed: N-methylethanamine, CH₃NHC₂H₅; N-methylaniline, C₆H₅NHCH₃
  • Tertiary (3°), R₃N
    • Simple: N,N-dimethylmethanamine, (CH₃)₃N
    • Mixed: N-ethyl-N-methylpropan-2-amine; N,N-dimethylaniline
Amines are aliphatic when every group on N is alkyl and aromatic when an aryl group is joined to N.

Naming amines

In the common system the alkyl groups are listed before amine: methylamine, dimethylamine, trimethylamine. In the IUPAC system the longest chain bonded to N is the parent and the final -e of the alkane becomes -amine with a position number; other groups on nitrogen are prefixes with N-.

Common and IUPAC names of amines
Common nameFormulaIUPAC name
Isopropylamine(CH₃)₂CHNH₂Propan-2-amine
AllylamineCH₂=CHCH₂NH₂Prop-2-en-1-amine
HexamethylenediamineH₂N(CH₂)₆NH₂Hexane-1,6-diamine
MethylisopropylamineCH₃NHCH(CH₃)₂N-Methylpropan-2-amine
Diethylbutylamine(C₂H₅)₂N(CH₂)₃CH₃N,N-Diethylbutan-1-amine
N,N-DimethylanilineC₆H₅N(CH₃)₂N,N-Dimethylbenzenamine
BenzylamineC₆H₅CH₂NH₂Phenylmethanamine

Worked example 1: naming from a structure

Name CH₃CH₂CH(NHCH₃)CH₃. Working: the longest carbon chain carrying the N has four carbons, and N is on carbon 2 counting from the right-hand CH₃, so the parent is butan-2-amine. The extra methyl is on nitrogen, so it gets the prefix N-. Name: N-methylbutan-2-amine. It is a secondary amine, because N carries two carbon groups.

Structure

Like ammonia, the nitrogen of an amine is sp³ hybridised: three sp³ orbitals form σ bonds to H or C, and the fourth holds the lone pair. The shape is pyramidal. The lone pair repels the bonding pairs more strongly, so the angles are below 109.5°. In trimethylamine the C–N–C angle is about 108°, a little larger than the H–N–H angle of ammonia (about 107°), because the bulky methyl groups repel each other.

Methods of preparation

  • Reduction of nitro compounds: H₂/Ni, Sn/HCl, Fe/HCl or H₂/Pd give primary amines: CH₃CH₂NO₂ + 6[H] → CH₃CH₂NH₂ + 2H₂O; nitrobenzene gives aniline.
  • Reduction of nitriles: H₂/Ni, LiAlH₄ or sodium in ethanol give primary amines with one more carbon than the alkyl group: CH₃CN + 4[H] → CH₃CH₂NH₂. With sodium and ethanol this is the Mendius reaction.
  • Reduction of isocyanides (sodium amalgam and ethanol) gives secondary amines: CH₃NC + 4[H] → CH₃NHCH₃.
  • Reduction of amides with LiAlH₄: RCONH₂ → RCH₂NH₂ (same number of carbons).
  • Hoffmann degradation: RCONH₂ + Br₂ + 4KOH → RNH₂ + K₂CO₃ + 2KBr + 2H₂O, a primary amine with one carbon fewer. It works for aryl amides too: benzamide gives aniline.
  • Gabriel phthalimide synthesis: phthalimide + ethanolic KOH gives potassium phthalimide; this N⁻ nucleophile displaces halide from R–X (S_N2) to give N-alkylphthalimide, which aqueous KOH hydrolyses to the pure primary amine and potassium phthalate. Aniline cannot be made this way, because aryl halides do not undergo this substitution.
  • Hoffmann ammonolysis: an alkyl halide heated with alcoholic NH₃ in a sealed tube gives a mixture of 1°, 2° and 3° amines and the quaternary salt, because each amine formed is itself a nucleophile: CH₃Br → CH₃NH₂ → (CH₃)₂NH → (CH₃)₃N → (CH₃)₄N⁺Br⁻. Excess ammonia favours the primary amine. Reactivity: RI > RBr > RCl.
  • Azide route: CH₃Br + NaN₃ → CH₃N₃, then LiAlH₄ gives CH₃NH₂ and N₂.
  • Aniline from chlorobenzene: heating with ammonia and Cu₂O at about 473 K. From phenol: ammonia and anhydrous ZnCl₂ at about 573 K.
  • Sabatier-Mailhe method: alcohol vapour and ammonia over alumina at about 673 K give all three classes of amine: C₂H₅OH → C₂H₅NH₂ → (C₂H₅)₂NH → (C₂H₅)₃N, each step losing water.

Worked example 2: choosing a method

Make ethanamine (2 C) from (a) a 3-carbon amide and (b) a 1-carbon halide. Working: (a) Hoffmann degradation removes one carbon, so start from propanamide: CH₃CH₂CONH₂ + Br₂ + 4KOH → CH₃CH₂NH₂ + K₂CO₃ + 2KBr + 2H₂O. (b) To add one carbon, turn CH₃Br into CH₃CN with KCN, then reduce: CH₃CN + 4[H] → CH₃CH₂NH₂.

Worked example 3: a Hoffmann degradation yield

5.9 g of acetamide undergoes Hoffmann degradation. What mass of methanamine forms if the yield is 100%? Working: CH₃CONH₂ = 24 + 5 + 14 + 16 = 59 g mol⁻¹, so 5.9 ÷ 59 = 0.100 mol. One mole of amide gives one mole of CH₃NH₂ (12 + 5 + 14 = 31 g mol⁻¹). Mass = 0.100 × 31 = 3.1 g.

Physical properties

Methylamine and ethylamine are gases with an ammonia-like smell; amines with four or more carbons are volatile liquids with a fishy smell. Aniline is colourless when pure but darkens in air as it is oxidised. Primary and secondary amines form intermolecular hydrogen bonds (N–H···N); tertiary amines have no N–H and cannot. N is less electronegative than O, so these bonds are weaker than those of alcohols.

Boiling points of isomeric amines and comparable compounds (values as in the textbook)
CompoundClassMolar massBoiling point (K)
Propan-1-amine, CH₃CH₂CH₂NH₂1° amine59321
N-Methylethanamine, C₂H₅NHCH₃2° amine59308
Trimethylamine, (CH₃)₃N3° amine59277
Propan-2-ol, (CH₃)₂CHOHAlcohol60355
Butane, C₄H₁₀Alkane58272.5

Boiling points: 1° > 2° > 3° amines (fewer N–H bonds, less hydrogen bonding); alcohols > amines > alkanes of similar mass.

Lower aliphatic amines dissolve in water by hydrogen bonding with it; solubility falls as the hydrophobic alkyl part grows, and the higher amines and aniline dissolve only slightly, though readily in benzene and ether. Key takeaways: amines are pyramidal sp³ bases with a lone pair; reduction, Hoffmann degradation and the Gabriel synthesis give primary amines; ammonolysis gives mixtures; 1° amines boil highest among isomeric amines.

Check your understanding

  1. 1. What is the IUPAC name of (CH₃)₂CHNHCH₃?

    1. N-Methylpropan-2-amine
    2. 2-Methylpropan-2-amine
    3. N,N-Dimethylethanamine
    4. Butan-2-amine
    Show answer

    Answer: A. The longest chain on N is the three-carbon isopropyl group, with N on C2: propan-2-amine. The second group on N is methyl, written N-methyl. So: N-methylpropan-2-amine, a secondary amine.

  2. 2. Which method gives a pure primary aliphatic amine, free from 2° and 3° amines, starting from an alkyl halide?

    1. Heating with alcoholic ammonia
    2. Gabriel phthalimide synthesis
    3. Sabatier-Mailhe method
    4. Reaction with KCN alone
    Show answer

    Answer: B. The phthalimide nitrogen can be alkylated only once, so hydrolysis releases only RNH₂. Ammonolysis and the Sabatier-Mailhe method give mixtures; KCN alone gives a nitrile, not an amine.

  3. 3. Benzamide is treated with Br₂ and KOH. What is formed?

    1. Benzylamine
    2. Benzoic acid
    3. Aniline
    4. Benzonitrile
    Show answer

    Answer: C. Hoffmann degradation removes the carbonyl carbon: C₆H₅CONH₂ + Br₂ + 4KOH → C₆H₅NH₂ + K₂CO₃ + 2KBr + 2H₂O. The product, aniline, has one carbon fewer than benzamide.

  4. 4. Why does trimethylamine boil at a lower temperature than its isomer propan-1-amine?

    1. Trimethylamine has a larger molar mass
    2. Trimethylamine has no N–H bond, so it cannot form intermolecular hydrogen bonds
    3. Propan-1-amine is ionic
    4. Trimethylamine has a planar structure
    Show answer

    Answer: B. Both have M = 59. Propan-1-amine has two N–H bonds and hydrogen-bonds to its neighbours; (CH₃)₃N has none, so only weaker forces hold its molecules together, and it boils at 277 K against 321 K.

  5. 5. Reduction of methyl isocyanide, CH₃NC, with sodium amalgam and ethanol gives which product?

    1. Ethanamine
    2. Methanamine
    3. Trimethylamine
    4. N-Methylmethanamine
    Show answer

    Answer: D. In CH₃–N≡C the nitrogen is already bonded to one carbon; reduction turns the isocyanide carbon into a second CH₃ on nitrogen, giving CH₃NHCH₃, N-methylmethanamine (a secondary amine). A cyanide CH₃CN would instead give ethanamine.

Privacy · Terms · Refunds · Delivery