- Practice
- About 23 min
- 5 practice questions
Nitro compounds: classification, isomerism and preparation
Classify and name nitro compounds, show chain, position and functional isomerism and nitro-aci tautomerism, explain the acidity of α-hydrogens, and prepare nitroalkanes and nitroarenes.
If something looks wrong, please tell us.
By the end of this lesson you can
- Classify nitro compounds as nitroalkanes, nitroarenes and aryl nitroalkanes, and nitroalkanes as primary, secondary or tertiary.
- Name nitro compounds and write their chain, position and functional isomers.
- Explain nitro-aci tautomerism and the acidity of α-hydrogens in nitroalkanes.
- Write laboratory and industrial methods of making nitroalkanes and nitrobenzene.
Nitrogen compounds are everywhere in living things and in industry: amines act in the nerves, vitamin B6 (pyridoxine) contains a nitrogen ring, and nitrogen compounds are found in dyes, drugs, polymers and explosives. This unit of the Tamil Nadu textbook covers nitro compounds, amines, diazonium salts and cyanides and isocyanides. A nitro compound is formed when a hydrogen of a hydrocarbon is replaced by the –NO₂ group.
Classification and naming
Classification of compounds with an –NO₂ group
-
Aliphatic
- Nitroalkanes, R–NO₂, such as nitroethane CH₃CH₂NO₂
- Their functional isomers, alkyl nitrites R–O–N=O, such as ethyl nitrite
-
Aromatic
- Nitroarenes: –NO₂ on the ring, such as nitrobenzene C₆H₅NO₂
- Aryl nitroalkanes: –NO₂ on a side chain, such as phenylnitromethane C₆H₅CH₂NO₂
Nitroalkanes are primary (1°), secondary (2°) or tertiary (3°) according to the carbon that carries the –NO₂: nitroethane (CH₃CH₂NO₂) is 1°, 2-nitropropane ((CH₃)₂CHNO₂) is 2°, and 2-methyl-2-nitropropane ((CH₃)₃CNO₂) is 3°. In IUPAC names nitro is always a prefix with a position number: (CH₃)₂CHCH₂NO₂ is 2-methyl-1-nitropropane, C₆H₅CH₂CH₂NO₂ is 1-nitro-2-phenylethane, and three –NO₂ groups on benzene at alternate positions give 1,3,5-trinitrobenzene.
Isomerism
| Type | What differs | Example for C₄H₉NO₂ |
|---|---|---|
| Chain | Length or branching of the carbon chain | 1-Nitrobutane and 2-methyl-1-nitropropane |
| Position | Position of –NO₂ | 1-Nitrobutane and 2-nitrobutane |
| Functional | Nitro group or nitrite group | 1-Nitrobutane, CH₃(CH₂)₃–NO₂, and butyl nitrite, CH₃(CH₂)₃–O–N=O |
Tautomerism: a nitroalkane with an α-hydrogen exists in equilibrium with an aci-form, in which that hydrogen has moved to an oxygen: CH₃–N(=O)–O ⇌ CH₂=N(O)–OH (nitromethane). Tertiary nitroalkanes have no α-H and show no tautomerism.
Nitro form and aci-form
-
Nitro form
- Less acidic
- Dissolves slowly in NaOH
- Low electrical conductivity
- Decolourises FeCl₃ solution
-
Aci-form
- More acidic
- Dissolves at once in NaOH
- Higher electrical conductivity
- Gives a reddish-brown colour with FeCl₃
Why the α-hydrogens are acidic
The strongly electron-withdrawing –NO₂ group pulls electron density from the α-carbon, so a base can remove an α-H, and primary and secondary nitroalkanes dissolve in NaOH to form salts. They are more acidic than aldehydes, ketones, esters and nitriles. Each alkyl group on the α-carbon pushes electrons back (+I effect), so acidity falls: CH₃NO₂ > CH₃CH₂NO₂ > (CH₃)₂CHNO₂.
Worked example 1: all isomers of C₂H₅NO₂
Working: two carbons, so no chain or position isomers among nitro compounds (only one, CH₃CH₂NO₂, nitroethane). The functional isomer is ethyl nitrite, CH₃CH₂–O–N=O. Nitroethane has two α-hydrogens, so it also has an aci-tautomer, CH₃CH=N(O)OH. Answer: nitroethane, ethyl nitrite, and the aci-form of nitroethane as a tautomer.
Preparing nitroalkanes
- From alkyl halides (laboratory): the textbook heats bromoethane with ethanolic potassium nitrite by an S_N2 reaction: CH₃CH₂Br + KNO₂ → CH₃CH₂NO₂ + KBr. (Many books use silver nitrite here, because the nitrite ion can bond through O as well as N and also gives some ethyl nitrite.) Halobenzenes do not react this way, because a C–Br bond on a benzene ring is hard to break.
- Vapour-phase nitration (industrial): methane and nitric acid vapour through a red-hot tube at about 675 K: CH₄ + HNO₃ → CH₃NO₂ + H₂O. Higher alkanes give mixtures, because C–C bonds also break (ethane gives nitroethane and nitromethane); fractional distillation separates them.
- From an α-halo acid: chloroacetic acid boiled with aqueous sodium nitrite: ClCH₂COOH + NaNO₂ → CH₃NO₂ + CO₂ + NaCl.
- Oxidation of tertiary amines with aqueous KMnO₄: (CH₃)₃C–NH₂ + 3[O] → (CH₃)₃C–NO₂ + H₂O, a route to tertiary nitroalkanes.
- Oxidation of oximes with trifluoroperoxyacetic acid: acetaldoxime gives nitroethane (1°) and acetoxime gives 2-nitropropane (2°).
Worked example 2: atom check
Check ClCH₂COOH + NaNO₂ → CH₃NO₂ + CO₂ + NaCl. Working: C 2 → 1 + 1; H 3 → 3; O 2 + 2 = 4 → 2 + 2 = 4; N 1 → 1; Na 1 → 1; Cl 1 → 1. Balanced. Notice that the –COOH carbon leaves as CO₂, which is why a two-carbon acid gives a one-carbon nitroalkane.
Preparing nitroarenes
Direct nitration: benzene heated to about 330 K with the nitrating mixture (concentrated HNO₃ + concentrated H₂SO₄) undergoes electrophilic substitution: C₆H₆ + HNO₃ → C₆H₅NO₂ + H₂O. Nitrobenzene is a pale yellow oil once called oil of mirbane. Further nitration gives m-dinitrobenzene, because –NO₂ directs to the meta position.
Indirect method for p-dinitrobenzene: p-nitroaniline is diazotised with NaNO₂ and HBF₄ to the diazonium tetrafluoroborate, which with NaNO₂ and copper exchanges –N₂⁺ for –NO₂. Alternatively an –NH₂ group can be oxidised straight to –NO₂ by Caro's acid (H₂SO₅), persulphuric acid (H₂S₂O₈) or peroxytrifluoroacetic acid.
Worked example 3: a nitration calculation
7.8 g of benzene is nitrated with 80% yield. What mass of nitrobenzene forms? Working: C₆H₆ = 6×12 + 6 = 78 g mol⁻¹, so 7.8 ÷ 78 = 0.100 mol. C₆H₅NO₂ = 72 + 5 + 14 + 32 = 123 g mol⁻¹. Theoretical mass = 0.100 × 123 = 12.3 g; at 80%: 12.3 × 0.80 = 9.84 g. The percentage of nitrogen in nitrobenzene is 14 ÷ 123 × 100 = 11.4%.
Physical properties
Lower nitroalkanes are colourless, pleasant-smelling liquids, sparingly soluble in water but soluble in benzene, acetone and similar solvents. Their high polarity gives them high boiling points; the isomeric alkyl nitrites boil lower.
Nitro (R–NO₂, N bonded to C) and nitrite (R–O–N=O, O bonded to C) are functional isomers; only 1° and 2° nitroalkanes have α-H, so only they are acidic and show tautomerism.
Key takeaways: nitroalkanes are 1°, 2° or 3°; they show chain, position and functional isomerism and nitro-aci tautomerism. Acidity of α-H falls as alkyl groups are added. Nitroalkanes come from alkyl halides, vapour-phase nitration, α-halo acids and oxidation of amines or oximes; nitrobenzene from the nitrating mixture.
Check your understanding
-
1. Which nitroalkane is tertiary?
- 1-Nitropropane
- 2-Methyl-1-nitropropane
- 2-Methyl-2-nitropropane
- 2-Nitrobutane
Show answer
Answer: C. In (CH₃)₃C–NO₂ the carbon carrying –NO₂ is bonded to three other carbons, so it is tertiary. 1-Nitropropane and 2-methyl-1-nitropropane are primary; 2-nitrobutane is secondary.
-
2. Which pair are functional isomers?
- 1-Nitropropane and 2-nitropropane
- Nitroethane and ethyl nitrite
- Nitromethane and nitroethane
- Nitrobenzene and phenylnitromethane
Show answer
Answer: B. Nitroethane (CH₃CH₂–NO₂) and ethyl nitrite (CH₃CH₂–O–N=O) have the same formula, C₂H₅NO₂, but different functional groups. The first pair are position isomers; the last two pairs have different formulas.
-
3. Which compound does NOT show nitro-aci tautomerism?
- Nitromethane
- Nitroethane
- 2-Nitropropane
- 2-Methyl-2-nitropropane
Show answer
Answer: D. Tautomerism needs an α-hydrogen to move to oxygen. In (CH₃)₃CNO₂ the α-carbon has three methyl groups and no hydrogen, so no aci-form is possible.
-
4. Which is the correct order of acidity?
- CH₃NO₂ > CH₃CH₂NO₂ > (CH₃)₂CHNO₂
- (CH₃)₂CHNO₂ > CH₃CH₂NO₂ > CH₃NO₂
- CH₃CH₂NO₂ > CH₃NO₂ > (CH₃)₂CHNO₂
- All three are equally acidic
Show answer
Answer: A. Each alkyl group on the α-carbon releases electrons (+I) and destabilises the anion formed when H⁺ is lost. Nitromethane has none, nitroethane one and 2-nitropropane two, so acidity falls in that order.
-
5. Methane is nitrated in the vapour phase. How many grams of nitromethane can 3.2 g of methane give at most? (C = 12, H = 1, N = 14, O = 16)
- 6.1 g
- 12.2 g
- 3.2 g
- 24.4 g
Show answer
Answer: B. CH₄ + HNO₃ → CH₃NO₂ + H₂O. Moles of CH₄ = 3.2 ÷ 16 = 0.20 mol, giving 0.20 mol CH₃NO₂ (12 + 3 + 14 + 32 = 61 g mol⁻¹). Mass = 0.20 × 61 = 12.2 g.
Sign in to keep track of the lessons you finish.