• Practice
  • About 26 min
  • 5 practice questions

Basicity and chemical reactions of amines

Compare base strengths with Kb and pKb, explain the order of basicity in water and the weakness of aniline, and write the reactions of amines with alkyl halides, acyl chlorides, nitrous acid, chloroform, CS₂ and electrophiles.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Use Kb and pKb to compare amine strengths and calculate the pH of an amine solution.
  • Explain the order of basicity of methyl- and ethylamines in water using +I, solvation and steric effects.
  • Explain why aniline is a weaker base than ammonia and how ring substituents change it.
  • Write the reactions of amines and use them to distinguish 1°, 2° and 3° amines.

The lone pair on nitrogen makes an amine both a base (it accepts H⁺) and a nucleophile (it attacks electron-poor carbon). Almost every reaction in this lesson is one of these two ideas.

Measuring basic strength

Amines form salts with acids, for example C₆H₅NH₂ + HCl → C₆H₅NH₃⁺Cl⁻ (anilinium chloride). In water, R–NH₂ + H₂O ⇌ R–NH₃⁺ + OH⁻; the equilibrium lies far to the left, so amines are weak bases compared with NaOH.

Kb = [RNH₃⁺][OH⁻] / [RNH₂]; pKb = −log Kb. Larger Kb, smaller pKb: stronger base.

— Basicity constant
pKb values in water (as given in the textbook)
AminepKbAminepKb
Ammonia, NH₃4.74Aniline, C₆H₅NH₂9.38
CH₃NH₂3.38C₂H₅NH₂3.29
(CH₃)₂NH3.28(C₂H₅)₂NH3.00
(CH₃)₃N4.22(C₂H₅)₃N3.25
Benzylamine, C₆H₅CH₂NH₂4.70N-Methylaniline9.30

Worked example 1: pH of a methylamine solution

Find the pH of 0.10 M methylamine (pKb 3.38). Working: Kb = 10^(−3.38) = 10^(0.62) × 10⁻⁴ = 4.17 × 10⁻⁴. For a weak base, [OH⁻] ≈ √(Kb × c) = √(4.17 × 10⁻⁴ × 0.10) = √(4.17 × 10⁻⁵) = 6.46 × 10⁻³ M. pOH = −log(6.46 × 10⁻³) = 3 − 0.81 = 2.19. pH = 14 − 2.19 = 11.81. (The base is about 6.5% ionised, so the shortcut is only approximate.)

Why the order in water is irregular

Alkyl groups release electrons (+I), making the lone pair more available, so in the gas phase basicity rises 3° > 2° > 1° > NH₃. In water two more effects act. The protonated amine is stabilised by hydrogen bonding with water (solvation): RNH₃⁺ has three N–H bonds to bond with water, R₂NH₂⁺ two and R₃NH⁺ only one. Bulky groups also crowd the nitrogen, hindering both solvation and the approach of H⁺. The balance of these effects gives:

(CH₃)₂NH > CH₃NH₂ > (CH₃)₃N > NH₃ and (C₂H₅)₂NH > (C₂H₅)₃N > C₂H₅NH₂ > NH₃ (in water). Secondary amines are the strongest in both series.

Effects that decide basicity in water

  • +I effect
    • More alkyl groups push more electron density onto N
    • Favours 3° > 2° > 1°
  • Solvation
    • More N–H in the cation means more hydrogen bonds to water
    • Favours 1° > 2° > 3°
  • Steric hindrance
    • Bulky groups crowd N and its cation
    • Lowers the basicity of 3° amines most

Aniline and substituted anilines

In aniline the lone pair on N is delocalised into the benzene ring by resonance, so it is less available for H⁺: aniline (pKb 9.38) is a much weaker base than ammonia (4.74). Electron-releasing groups on the ring (–CH₃, –OCH₃, –NH₂) raise the basicity, especially at the para position (p-toluidine pKb 8.92), while electron-withdrawing groups (–NO₂, –Cl, –COOH) lower it (p-nitroaniline pKb 13.0, according to the textbook's table). Benzylamine, whose –NH₂ is not on the ring, behaves like an alkylamine.

Alkylamines > aralkylamines (benzylamine) > ammonia > N-alkylanilines > arylamines (aniline)

Worked example 2: comparing two bases

How many times stronger a base is ethanamine (pKb 3.29) than aniline (pKb 9.38)? Working: Kb ratio = 10^(9.38 − 3.29) = 10^6.09 = 10^0.09 × 10⁶ = 1.23 × 10⁶. Ethanamine is about 1.2 million times stronger, because its lone pair is not shared with a ring and its ethyl group releases electrons.

Reactions as nucleophiles

  • Alkylation: with alkyl halides, R–NH₂ becomes R–NHCH₃, then R–N(CH₃)₂, and finally the quaternary salt R–N(CH₃)₃⁺Br⁻.
  • Acylation: 1° and 2° amines react with acetyl chloride or acetic anhydride (pyridine removes the HCl): C₂H₅NH₂ + CH₃COCl → C₂H₅NHCOCH₃ (N-ethylacetamide) + HCl. Tertiary amines have no N–H and are not acylated.
  • Schotten-Baumann reaction: benzoylation with benzoyl chloride and aqueous NaOH: C₆H₅NH₂ + C₆H₅COCl → C₆H₅NHCOC₆H₅ (N-phenylbenzamide) + HCl.
  • Carbylamine reaction (1° amines only): warming with chloroform and alcoholic KOH gives a foul-smelling isocyanide: C₂H₅NH₂ + CHCl₃ + 3KOH → C₂H₅NC + 3KCl + 3H₂O.
  • Hofmann mustard oil reaction (1° amines): with CS₂ a dithiocarbamic acid forms, which HgCl₂ converts to an alkyl isothiocyanate with a mustard-like smell: CH₃NH₂ + CS₂ → CH₃NHCSSH, then CH₃NHCSSH + HgCl₂ → CH₃N=C=S + HgS + 2HCl. Aniline with CS₂ gives diphenylthiourea, which concentrated HCl turns into phenyl isothiocyanate.

Reaction with nitrous acid (NaNO₂ + HCl)

Nitrous acid distinguishes the three classes
AmineProduct with HNO₂What you see
1° aliphatic, C₂H₅NH₂Unstable diazonium salt that gives ethanol + N₂Steady bubbles of nitrogen
1° aromatic, aniline, at 273-278 KBenzenediazonium chloride (diazotisation)Clear solution; used for dyes (lesson 5)
2° (aliphatic or aromatic)N-Nitrosoamine, R₂N–N=OYellow oil, insoluble in water (Liebermann's nitroso test)
3° aliphaticTrialkylammonium nitrite salt, R₃NH⁺NO₂⁻Dissolves; no gas
3° aromatic, N,N-dimethylanilinep-Nitroso-N,N-dimethylanilineRing substitution at the para position

Diazotisation: C₆H₅NH₂ + NaNO₂ + 2HCl → C₆H₅N₂⁺Cl⁻ + NaCl + 2H₂O (273-278 K)

Electrophilic substitution in aniline

–NH₂ is a strongly activating, ortho/para-directing group, because its lone pair feeds electron density into the ring. Bromine water at once gives a white precipitate of 2,4,6-tribromoaniline. To get a single substituent the –NH₂ is first acetylated to acetanilide: the lone pair is then shared with the C=O as well, so –NHCOCH₃ is less activating. Bromination then gives mainly p-bromoacetanilide, and hydrolysis gives p-bromoaniline.

  • Nitration: direct nitration gives tars (oxidation) and, because the strong acid protonates –NH₂ to the meta-directing –NH₃⁺, a good deal of m-nitroaniline beside o- and p-nitroaniline. Acetylation first, nitration at about 288 K and hydrolysis give mainly p-nitroaniline.
  • Sulphonation: aniline and concentrated H₂SO₄ give anilinium hydrogensulphate, which at 453-473 K gives sulphanilic acid (p-aminobenzenesulphonic acid), which exists as a zwitterion.
  • No Friedel-Crafts reaction: the basic –NH₂ gives its lone pair to the Lewis acid AlCl₃, forming an adduct that deactivates the ring.

Worked example 3: atom check of the carbylamine reaction

Working for C₂H₅NH₂ + CHCl₃ + 3KOH → C₂H₅NC + 3KCl + 3H₂O. C 2 + 1 = 3 → 3; H 7 + 1 + 3 = 11 → 5 + 6 = 11; N 1 → 1; Cl 3 → 3; K 3 → 3; O 3 → 3. Balanced. Because only primary amines give the smell, this is a test for them.

Key takeaways: smaller pKb means stronger base; in water secondary alkylamines are strongest and aniline is weaker than ammonia. Carbylamine and mustard oil reactions identify 1° amines; nitrous acid sorts 1°, 2° and 3°. Protect –NH₂ by acetylation to control substitution in aniline.

Check your understanding

  1. 1. Which is the strongest base in aqueous solution?

    1. Ammonia
    2. Methanamine
    3. N-Methylmethanamine
    4. N,N-Dimethylmethanamine
    Show answer

    Answer: C. In water the combined +I, solvation and steric effects give (CH₃)₂NH > CH₃NH₂ > (CH₃)₃N > NH₃. The textbook's pKb values agree: 3.28 for (CH₃)₂NH is the smallest.

  2. 2. Why is aniline a weaker base than ammonia?

    1. The phenyl group releases electrons to nitrogen
    2. The lone pair on nitrogen is delocalised over the benzene ring
    3. Aniline has no lone pair
    4. Aniline is more strongly solvated than ammonia
    Show answer

    Answer: B. Resonance spreads the nitrogen lone pair into the ring, so it is less available to accept a proton; aniline's pKb (9.38) is far larger than ammonia's (4.74).

  3. 3. An amine gives a yellow oily liquid insoluble in water when treated with NaNO₂ and HCl. What class of amine is it?

    1. Secondary amine
    2. Primary aliphatic amine
    3. Tertiary aliphatic amine
    4. Primary aromatic amine at 273 K
    Show answer

    Answer: A. Secondary amines give N-nitrosoamines, R₂N–N=O, which separate as yellow oils (Liebermann's nitroso test). Primary aliphatic amines release N₂, tertiary aliphatic amines form soluble nitrite salts, and aniline at 273 K gives a diazonium salt solution.

  4. 4. Which amine does NOT give the carbylamine (isocyanide) test?

    1. Aniline
    2. Ethanamine
    3. Benzylamine
    4. N-Methylethanamine
    Show answer

    Answer: D. The carbylamine reaction needs two N–H hydrogens, so only primary amines respond. CH₃NHC₂H₅ is secondary and gives no isocyanide; aniline, ethanamine and benzylamine are all primary.

  5. 5. What is the pKb of a base whose Kb is 2.0 × 10⁻⁵?

    1. 5.30
    2. 4.70
    3. 4.30
    4. 2.00
    Show answer

    Answer: B. pKb = −log(2.0 × 10⁻⁵) = 5 − log 2.0 = 5 − 0.30 = 4.70. This matches benzylamine in the textbook's table.

Privacy · Terms · Refunds · Delivery