- Practice
- About 22 min
- 5 practice questions
Reactions of nitroalkanes and nitrobenzene
Predict how the reducing agent and pH decide the reduction product of a nitro compound, write hydrolysis, halogenation and Nef reactions of nitroalkanes, and explain the meta substitution of nitrobenzene.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write the stages in the reduction of –NO₂ and choose reagents that stop at each stage.
- Distinguish 1°, 2° and 3° nitroalkanes by their hydrolysis.
- Write the halogenation of nitromethane to chloropicrin and outline the Nef reaction.
- Explain why nitrobenzene is substituted slowly and at the meta position, and list uses of nitro compounds.
The –NO₂ group can take up hydrogen step by step, so reduction is the most useful reaction of nitro compounds: it is the main route to amines. Its α-hydrogens also allow hydrolysis and halogenation.
Reduction of nitroalkanes
Stages in the reduction of nitromethane
- CH₃NO₂ Nitromethane
- CH₃N=O Nitrosomethane, after 2[H] and loss of H₂O
- CH₃NHOH N-Methylhydroxylamine, after 2[H] more
- CH₃NH₂ Methanamine, after 2[H] more and loss of H₂O
Where the reduction stops depends on the reagent and the pH. In acid (Sn/HCl) the reduction goes all the way: CH₃NO₂ + 6[H] → CH₃NH₂ + 2H₂O. In neutral solution (Zn/NH₄Cl) it stops at the hydroxylamine: CH₃NO₂ + 4[H] → CH₃NHOH + H₂O. Catalytic hydrogen (H₂/Ni) also gives the amine. By contrast, an alkyl nitrite reduced by Sn/HCl gives an alcohol, because its N is not bonded to carbon: CH₃CH₂–O–N=O + 6[H] → CH₃CH₂OH + NH₃ + H₂O.
Worked example 1: atom check of the nitrite reduction
Working for C₂H₅ONO + 6[H] → C₂H₅OH + NH₃ + H₂O. C 2 → 2; H 5 + 6 = 11 → 6 + 3 + 2 = 11; N 1 → 1; O 2 → 1 + 1 = 2. Balanced. This difference (amine from R–NO₂, alcohol from R–ONO) is a way to tell the two isomers apart.
Hydrolysis: telling 1°, 2° and 3° apart
- Primary nitroalkanes boiled with concentrated HCl (or H₂SO₄) give a carboxylic acid and hydroxylamine: CH₃CH₂NO₂ + H₂O → CH₃COOH + NH₂OH.
- Secondary nitroalkanes give a ketone and nitrous oxide: 2(CH₃)₂CHNO₂ → 2(CH₃)₂C=O + N₂O + H₂O.
- Tertiary nitroalkanes do not react.
- An alkyl nitrite is hydrolysed by acid or alkali to an alcohol and nitrous acid: C₂H₅ONO + H₂O → C₂H₅OH + HNO₂.
Worked example 2: balancing the 2° hydrolysis
Working for 2(CH₃)₂CHNO₂ → 2(CH₃)₂CO + N₂O + H₂O. Left: C 6, H 14, N 2, O 4. Right: C 2 × 3 = 6; H 2 × 6 + 2 = 14; N 2; O 2 × 1 + 1 + 1 = 4. Balanced. Two molecules are needed because N₂O contains two nitrogens.
Halogenation and the Nef reaction
With Cl₂ or Br₂ and NaOH, the α-hydrogens of 1° and 2° nitroalkanes are replaced one after another by halogen. Nitromethane gives chloropicrin (trichloronitromethane): CH₃NO₂ + 3Cl₂ → CCl₃NO₂ + 3HCl, used as an insecticide. In the Nef reaction, the sodium salt of a primary or secondary nitroalkane (its aci-form anion, made with KOH) is acidified to give an aldehyde or ketone: nitroethane gives ethanal. The textbook also notes that nitroethane is suspected of causing genetic damage and harming the nervous system, so nitro compounds are handled with care.
Reduction of nitrobenzene
| Conditions | Main product |
|---|---|
| Sn/HCl or Fe/HCl (acid) | Aniline, C₆H₅NH₂ |
| H₂ with Ni or Pt, or LiAlH₄ | Aniline |
| Zn/NH₄Cl (neutral) | Phenylhydroxylamine, C₆H₅NHOH |
| Mild reduction (2[H]) | Nitrosobenzene, C₆H₅N=O |
| Alkaline conditions | Nitrosobenzene and aniline condense to azobenzene, C₆H₅N=NC₆H₅; Zn/NaOH carries this on to hydrazobenzene, C₆H₅NH–NHC₆H₅ |
| Electrolytic, weakly acidic | Aniline |
| Electrolytic, strongly acidic | Phenylhydroxylamine, which rearranges to p-aminophenol |
C₆H₅NO₂ + 6[H] → C₆H₅NH₂ + 2H₂O (acid medium). In neutral medium: C₆H₅NO₂ + 4[H] → C₆H₅NHOH + H₂O.
Selective reduction: ammonium sulphide reduces only one of two nitro groups, so m-dinitrobenzene gives m-nitroaniline: C₆H₄(NO₂)₂ + 3(NH₄)₂S → C₆H₄(NO₂)NH₂ + 6NH₃ + 2H₂O + 3S.
Worked example 3: mass of aniline
24.6 g of nitrobenzene is reduced completely with Sn/HCl. What mass of aniline forms? Working: C₆H₅NO₂ = 123 g mol⁻¹, so 24.6 ÷ 123 = 0.200 mol. Aniline C₆H₅NH₂ = 72 + 7 + 14 = 93 g mol⁻¹. Mass = 0.200 × 93 = 18.6 g. Check of the selective reduction equation: N 2 + 6 = 8 → 2 + 6 = 8; H 4 + 24 = 28 → 6 + 18 + 4 = 28; O 4 → 2 + 2 = 4; S 3 → 3.
Electrophilic substitution in nitrobenzene
–NO₂ withdraws electrons from the ring by both inductive and resonance effects. The ring becomes much less reactive (strongly deactivating), and the ortho and para positions lose the most electron density, so an electrophile attacks the meta position. Vigorous conditions are needed.
- Chlorination (Cl₂ with AlCl₃): 3-chloronitrobenzene (m-chloronitrobenzene).
- Nitration (nitrating mixture, about 373 K): 1,3-dinitrobenzene; under still harsher conditions 1,3,5-trinitrobenzene (TNB).
- Sulphonation (concentrated or fuming H₂SO₄): 3-nitrobenzenesulphonic acid.
- No Friedel-Crafts reactions, because the ring is too deactivated.
Uses of nitro compounds
- Nitromethane: fuel for racing cars; chloropicrin: insecticide.
- Nitroethane: fuel additive, a starting material for explosives, and a solvent for polymers, cellulose esters, synthetic rubber and dyes.
- Ethyl nitrite: the textbook notes that a 4% solution in alcohol (sweet spirit of nitre) has been used as a diuretic.
- Nitrobenzene: making aniline, dyes, drugs, pesticides, synthetic rubber and explosives such as TNT and TNB, and in refining lubricating oils.
Key takeaways: acid reduction of –NO₂ gives –NH₂, neutral gives –NHOH, alkaline gives azo and hydrazo compounds. On hydrolysis 1° nitroalkanes give acids, 2° give ketones and 3° do not react. –NO₂ deactivates the ring and directs meta.
Check your understanding
-
1. Nitrobenzene is reduced with zinc dust and aqueous ammonium chloride. What is the main product?
- Aniline
- Azobenzene
- Phenylhydroxylamine
- p-Aminophenol
Show answer
Answer: C. Zn/NH₄Cl is a neutral medium, in which the reduction stops after 4[H] at C₆H₅NHOH, phenylhydroxylamine. Acid conditions would give aniline, alkaline conditions azo compounds, and strongly acidic electrolysis p-aminophenol.
-
2. Which compound gives a ketone on boiling with concentrated HCl?
- Nitroethane
- 2-Nitropropane
- 2-Methyl-2-nitropropane
- 1-Nitropropane
Show answer
Answer: B. Secondary nitroalkanes are hydrolysed to ketones: 2-nitropropane gives propanone (with N₂O and water). Primary ones (nitroethane, 1-nitropropane) give carboxylic acids, and the tertiary one does not react.
-
3. What is chloropicrin and how is it obtained?
- CCl₃NO₂, from nitromethane, chlorine and NaOH
- CH₂ClNO₂, from methane and nitryl chloride
- CCl₄, from chloroform and chlorine
- C₆H₄ClNO₂, from nitrobenzene and chlorine
Show answer
Answer: A. All three α-hydrogens of nitromethane are replaced by chlorine in the presence of NaOH: CH₃NO₂ + 3Cl₂ → CCl₃NO₂ + 3HCl. CCl₃NO₂, trichloronitromethane, is chloropicrin.
-
4. Why does nitration of nitrobenzene give mainly 1,3-dinitrobenzene?
- –NO₂ donates electrons to the ortho and para positions
- The meta position is less crowded
- Nitrobenzene is first reduced to aniline
- –NO₂ withdraws electrons most strongly from the ortho and para positions, leaving meta the least deactivated
Show answer
Answer: D. The resonance structures of nitrobenzene put positive charge at the ortho and para carbons, so an electrophile avoids them; meta is the least deactivated position. –NO₂ withdraws, never donates, electrons.
-
5. Which reagent reduces m-dinitrobenzene to m-nitroaniline without touching the second nitro group?
- Sn and concentrated HCl
- Ammonium sulphide
- H₂ with Ni
- LiAlH₄
Show answer
Answer: B. (NH₄)₂S is a mild, selective reducing agent that reduces only one –NO₂ group. Sn/HCl, H₂/Ni and LiAlH₄ would reduce both groups, giving m-phenylenediamine.
Sign in to keep track of the lessons you finish.