- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Organic nitrogen compounds
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions first, writing down your answer and your working for each, and only then open the explanations. The questions mix all five lessons and are a little harder than the lesson checks.
Final self-assessment
-
1. Which statement correctly distinguishes nitroethane from ethyl nitrite?
- Both give ethanamine on reduction with Sn/HCl
- Nitroethane gives ethanamine and ethyl nitrite gives ethanol on reduction with Sn/HCl
- Ethyl nitrite has an acidic α-hydrogen but nitroethane does not
- Nitroethane boils lower than ethyl nitrite
Show answer
Answer: B. In nitroethane N is bonded to carbon, so reduction gives CH₃CH₂NH₂; in ethyl nitrite N is bonded through oxygen, so reduction gives CH₃CH₂OH + NH₃ + H₂O. Nitroethane is the more polar and higher boiling, and it is nitroethane that has acidic α-H.
-
2. Which nitroalkane dissolves in aqueous NaOH?
- 2-Methyl-2-nitropropane
- 2-Nitropropane
- Both of them
- Neither of them
Show answer
Answer: B. Only nitroalkanes with an α-hydrogen are acidic enough to form a salt with NaOH. 2-Nitropropane has one α-H; 2-methyl-2-nitropropane has none.
-
3. Bromoethane is heated with ethanolic potassium nitrite, as in the textbook's laboratory method. By what mechanism does the main reaction occur?
- S_N1
- Electrophilic substitution
- S_N2
- Free-radical substitution
Show answer
Answer: C. The nitrite ion is a nucleophile that attacks the primary carbon of bromoethane from the back and displaces Br⁻ in one step, an S_N2 reaction, giving nitroethane.
-
4. Nitrobenzene is electrolytically reduced in strongly acidic solution. What is the final product?
- Aniline
- Azobenzene
- Hydrazobenzene
- p-Aminophenol
Show answer
Answer: D. In strongly acidic electrolysis the reduction stops at phenylhydroxylamine, which rearranges in the acid to p-aminophenol. Weakly acidic electrolysis gives aniline; azo and hydrazo compounds come from alkaline reduction.
-
5. Which compound is formed on hydrolysis of nitroethane with boiling concentrated HCl?
- Ethanoic acid
- Ethanal
- Propanone
- Ethanol
Show answer
Answer: A. Primary nitroalkanes are hydrolysed to carboxylic acids with the same number of carbons, plus hydroxylamine: CH₃CH₂NO₂ + H₂O → CH₃COOH + NH₂OH.
-
6. Nitration of nitrobenzene with the nitrating mixture at about 373 K gives mainly which compound?
- 1,2-Dinitrobenzene
- 1,4-Dinitrobenzene
- 1,3-Dinitrobenzene
- 2,4,6-Trinitrophenol
Show answer
Answer: C. –NO₂ is meta-directing, so the second nitro group enters position 3: 1,3-dinitrobenzene. p-Dinitrobenzene needs the indirect diazonium route.
-
7. Aniline cannot be prepared by the Gabriel phthalimide synthesis because
- phthalimide is not acidic
- aniline is too basic to be released
- chlorobenzene does not undergo nucleophilic substitution with the phthalimide anion
- aniline reacts with KOH
Show answer
Answer: C. The key step is an S_N2 attack of the phthalimide anion on R–X. A halogen on a benzene ring is bonded too strongly (partial double-bond character), so the substitution fails.
-
8. An amine gives a foul-smelling product when warmed with CHCl₃ and alcoholic KOH. Which could it be?
- Propan-2-amine
- N-Methylethanamine
- Trimethylamine
- N,N-Dimethylaniline
Show answer
Answer: A. The carbylamine test is positive only for primary amines. Propan-2-amine, (CH₃)₂CHNH₂, is primary; N-methylethanamine is secondary, and trimethylamine and N,N-dimethylaniline are tertiary.
-
9. How many moles of CH₃Br are needed to convert one mole of ethanamine into the quaternary salt C₂H₅N(CH₃)₃⁺Br⁻?
- 1
- 2
- 4
- 3
Show answer
Answer: D. Each methylation replaces one N–H or adds the final alkyl group: C₂H₅NH₂ → C₂H₅NHCH₃ → C₂H₅N(CH₃)₂ → C₂H₅N(CH₃)₃⁺Br⁻. That takes three moles of CH₃Br.
-
10. Which is the correct order of basic strength in water?
- (C₂H₅)₂NH > (C₂H₅)₃N > C₂H₅NH₂ > NH₃
- (C₂H₅)₃N > (C₂H₅)₂NH > C₂H₅NH₂ > NH₃
- NH₃ > C₂H₅NH₂ > (C₂H₅)₂NH > (C₂H₅)₃N
- C₂H₅NH₂ > (C₂H₅)₂NH > (C₂H₅)₃N > NH₃
Show answer
Answer: A. The textbook's pKb values are 3.00 for (C₂H₅)₂NH, 3.25 for (C₂H₅)₃N, 3.29 for C₂H₅NH₂ and 4.74 for NH₃. Smallest pKb means strongest base, giving the first order.
-
11. To prepare p-nitroaniline in good yield from aniline, why is aniline first converted to acetanilide?
- To make the ring more strongly activated
- To reduce the activating effect of –NH₂ and prevent oxidation and protonation
- Because acetanilide is meta-directing
- To remove the nitrogen atom
Show answer
Answer: B. Acetylation shares the N lone pair with the C=O, so –NHCOCH₃ is still ortho/para-directing but milder; it is not oxidised to tars or protonated to the meta-directing –NH₃⁺. Hydrolysis after nitration gives p-nitroaniline.
-
12. Which sequence converts aniline into fluorobenzene?
- NaNO₂ + HCl at 273 K, then CuCN
- NaNO₂ + HCl at 273 K, then HBF₄ and heat
- NaNO₂ + HCl at 273 K, then warm water
- Br₂ water, then H₃PO₂
Show answer
Answer: B. Diazotisation gives C₆H₅N₂Cl; HBF₄ precipitates C₆H₅N₂BF₄, which on heating gives C₆H₅F + BF₃ + N₂ (Balz-Schiemann reaction). The other routes give benzonitrile, phenol and tribromobenzene.
-
13. Why does coupling of benzenediazonium chloride with aniline need a mildly acidic medium (pH about 4-5)?
- To keep enough free –NH₂ on aniline while the diazonium ion stays intact
- To convert aniline into phenol
- Because the azo dye forms only in strong acid
- To make the diazonium ion a nucleophile
Show answer
Answer: A. In strong acid aniline becomes the unreactive anilinium ion, and in alkali the diazonium ion is converted to other species. Mild acidity keeps both partners in their reactive forms.
-
14. Ethyl bromide is heated with ethanolic AgCN, and the main product is reduced with Na and ethanol. What is the final product?
- Propanamine
- Ethanamine
- N-Methylethanamine
- Propanenitrile
Show answer
Answer: C. AgCN gives mainly ethyl isocyanide, C₂H₅–N≡C. Reduction converts the isocyanide carbon into a CH₃ on nitrogen, giving C₂H₅NHCH₃, N-methylethanamine, a secondary amine.
-
15. Propanenitrile is hydrolysed completely with acid and the product is treated with SOCl₂. What is formed?
- Propanamide
- Propanoic acid
- Ethanoyl chloride
- Propanoyl chloride
Show answer
Answer: D. Complete hydrolysis gives CH₃CH₂COOH (propanoic acid); SOCl₂ replaces the –OH by –Cl, giving CH₃CH₂COCl, propanoyl chloride, with SO₂ and HCl.
Questions 1-3: lesson 1 (nitro compounds, isomerism, preparation). Questions 4-6: lesson 2 (reactions of nitro compounds). Questions 7-9: lesson 3 (amines: naming and preparation). Questions 10-12: lesson 4 (basicity and reactions of amines). Questions 13-15: lesson 5 (diazonium salts, cyanides and isocyanides).
Sign in to keep track of the lessons you finish.