• Practice
  • About 26 min
  • 5 practice questions

Aluminium chloride, alums and the carbon group: catenation, allotropes, CO and CO₂

Prepare aluminium chloride and alums and write their reactions, explain catenation and the structures of carbon's allotropes, and describe the preparation, properties, structure and uses of CO and CO₂.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Prepare AlCl₃ and potash alum and write their key reactions.
  • State the conditions for catenation and why carbon shows it best.
  • Compare graphite, diamond, fullerene, nanotubes and graphene.
  • Prepare CO and CO₂ and write their important reactions and structures.

Aluminium chloride is a classic Lewis-acid catalyst and alum purifies drinking water. In group 14, carbon's ability to bond with itself makes it unique, from diamond to the fullerene 'buckyball', and its two oxides, CO and CO₂, are central to industry and life.

Aluminium chloride, AlCl₃

Preparation: 2Al + 6HCl → 2AlCl₃ + 3H₂ or Al(OH)₃ + 3HCl → AlCl₃ + 3H₂O, then evaporation gives the hydrated salt. McAfee process: heating alumina and coke in chlorine, 2Al₂O₃ + 3C + 6Cl₂ → 4AlCl₃ + 3CO₂ (check: Al 4; O 6 = 6; C 3; Cl 12 = 12). Industrially, aluminium is chlorinated at about 1000 K: 2Al + 3Cl₂ → 2AlCl₃.

  • Anhydrous AlCl₃ is colourless and hygroscopic and fumes in moist air.
  • Its solution is acidic by hydrolysis: AlCl₃ + 3H₂O → Al(OH)₃ + 3HCl.
  • With NH₄OH: AlCl₃ + 3NH₄OH → Al(OH)₃ + 3NH₄Cl.
  • With excess NaOH: AlCl₃ + 4NaOH → NaAlO₂ + 3NaCl + 2H₂O (check: Na 4 = 1 + 3; O 4 = 2 + 2; H 4 = 4).
  • As a Lewis acid it forms adducts with ammonia, phosphine and carbonyl chloride, for example AlCl₃·6NH₃.
  • Uses: catalyst in Friedel–Crafts reactions; cracking mineral oils to petrol; catalyst for dyes, drugs and perfumes.

Alums

'Alum' first meant potash alum, K₂SO₄·Al₂(SO₄)₃·24H₂O. Now any double salt M′₂SO₄·M″₂(SO₄)₃·24H₂O is an alum, where M′ is a univalent ion (Na⁺, K⁺, NH₄⁺) and M″ a trivalent ion (Al³⁺, Cr³⁺, Fe³⁺). Examples: sodium alum, ammonium alum (NH₄)₂SO₄·Al₂(SO₄)₃·24H₂O, and chrome alum K₂SO₄·Cr₂(SO₄)₃·24H₂O. Alums are more soluble in hot than in cold water, and in solution show the reactions of their separate ions.

Preparation from alum stone (alunite) K₂SO₄·Al₂(SO₄)₃·4Al(OH)₃: excess H₂SO₄ converts the hydroxide to sulphate, K₂SO₄·Al₂(SO₄)₃·4Al(OH)₃ + 6H₂SO₄ → K₂SO₄ + 3Al₂(SO₄)₃ + 12H₂O (check: Al 6 = 6; sulphate 4 + 6 = 1 + 9; H 12 + 12 = 24). A calculated amount of K₂SO₄ is added and the solution crystallised: K₂SO₄ + Al₂(SO₄)₃ + 24H₂O → K₂SO₄·Al₂(SO₄)₃·24H₂O.

  • Potash alum is white, soluble in water, insoluble in alcohol; its solution is acidic (hydrolysis of Al³⁺).
  • It melts at about 365 K; at about 475 K it loses its water and swells into burnt alum; at red heat, K₂SO₄·Al₂(SO₄)₃ → K₂SO₄ + Al₂O₃ + 3SO₃.
  • With NH₄OH it gives Al(OH)₃: K₂SO₄·Al₂(SO₄)₃·24H₂O + 6NH₄OH → K₂SO₄ + 3(NH₄)₂SO₄ + 2Al(OH)₃ + 24H₂O.
  • Uses: purifying water (coagulating suspended particles), waterproofing textiles, dyeing, paper and leather tanning, and as a styptic to stop bleeding.

Worked example 1: molar mass and water in potash alum

Use K = 39.10, Al = 26.98, S = 32.07, O = 16.00, H = 1.008. Working: K₂SO₄ = 78.20 + 32.07 + 64.00 = 174.27; Al₂(SO₄)₃ = 53.96 + 3 × 96.07 = 342.17; 24H₂O = 24 × 18.02 = 432.48. Molar mass = 174.27 + 342.17 + 432.48 = 948.9 g mol⁻¹. Water = 432.48 ÷ 948.9 × 100 = 45.6%, which is driven off at about 475 K to give burnt alum.

Group 14: occurrence and catenation

Carbon occurs native as graphite and combined in coal, crude oil and carbonate rocks such as calcite and magnesite. Silicon occurs as silica (sand, quartz) and in silicate minerals and clay. Catenation is the ability to form chains of atoms of the same element. It needs: (i) valency of two or more, (ii) ability to bond with itself, (iii) a self-bond about as strong as its bonds with other elements, and (iv) kinetic inertness of the chain compounds. Carbon meets all four, which is why it forms millions of compounds with itself and with H, O, N, S and halogens.

Allotropes of carbon

AllotropeHybridisation and structureKey property
Graphitesp²; flat hexagonal sheets, C–C 1.41 Å; sheets held by weak van der Waals forces about 3.4 Å apartSoft, slippery (lubricant), conducts electricity through delocalised π electrons; most stable form at ordinary conditions
Diamondsp³; each C bonded tetrahedrally to four others, C–C 1.54 Å, a giant 3-D networkHardest element; no free electrons, so a non-conductor; used for cutting glass, drilling rock
Fullerenes (C₆₀, C₇₀ ...)sp²; discrete cage molecules; C₆₀ has 20 six-membered and 12 five-membered ringsC₆₀ is buckminsterfullerene ('buckyball'), soccer-ball shaped, aromatic character
Carbon nanotubesGraphite-like tubes closed by fullerene endsStronger than steel along the axis, conduct electricity; nanoelectronics, catalysis, medicine
GrapheneA single planar sheet of sp² carbon in a honeycomb latticeOne layer of graphite

Graphite and diamond

  • Graphite
    • sp² carbon, three σ bonds each
    • Fourth electron delocalised as π
    • Layers slide: soft lubricant
    • Conducts electricity
  • Diamond
    • sp³ carbon, four σ bonds each
    • All electrons in σ bonds
    • Rigid 3-D network: very hard
    • Electrical insulator

Carbon monoxide, CO

Preparation: 2C + O₂ → 2CO with limited oxygen. Industrially, burning carbon in air gives producer gas (CO + N₂); pure CO is recovered by absorbing it in copper(I) chloride under pressure (forming CuCl(CO)·2H₂O) and releasing it at reduced pressure. In the laboratory, pure CO is made by warming methanoic acid with concentrated H₂SO₄, which removes water: HCOOH → CO + H₂O.

  • A colourless, odourless, poisonous gas, slightly soluble in water; burns with a blue flame, 2CO + O₂ → 2CO₂.
  • With Cl₂ in light or over charcoal it forms the poisonous gas phosgene, CO + Cl₂ → COCl₂ (used to make isocyanates).
  • A strong reducing agent: Fe₂O₃ + 3CO → 2Fe + 3CO₂.
  • Syngas (CO + H₂) gives methanol at high temperature and pressure: CO + 2H₂ → CH₃OH. Oxo process: CO + C₂H₄ + H₂ → CH₃CH₂CHO (propanal).
  • Fischer–Tropsch synthesis: CO and H₂ at below 50 atm over metal catalysts at 500–700 K give hydrocarbons, nCO + (2n+1)H₂ → CₙH₂ₙ₊₂ + nH₂O and nCO + 2nH₂ → CₙH₂ₙ + nH₂O.
  • A ligand: with metals it forms carbonyls in which the metal is in the zero oxidation state, [Ni(CO)₄], [Fe(CO)₅], [Cr(CO)₆].

Structure: CO is linear with three shared electron pairs (a triple bond in the main resonance form, :C≡O:) and a C–O distance of 1.128 Å. Uses: water gas (CO + H₂) and producer gas (CO + N₂) are industrial fuels; CO reduces metal oxides; it is an important ligand.

Carbon dioxide, CO₂

Production: burning coke in excess air, C + O₂ → CO₂ (ΔH = −394 kJ mol⁻¹); as a by-product of lime-making, CaCO₃ → CaO + CO₂; in the laboratory, CaCO₃ + 2HCl → CaCl₂ + H₂O + CO₂. Properties: colourless, non-flammable, heavier than air; critical temperature 31 °C, so it is easily liquefied. It is very stable, decomposing to CO + ½O₂ only at very high temperature (around 3100 K). Hot CO₂ oxidises magnesium: CO₂ + 2Mg → 2MgO + C. The water gas equilibrium CO₂ + H₂ ⇌ CO + H₂O is industrially important. In water it forms weak carbonic acid: CO₂ + H₂O ⇌ H₂CO₃ ⇌ H⁺ + HCO₃⁻.

Structure: linear (sp carbon), with two equal C–O bonds; the textbook describes two C–O σ bonds plus π bonding spread over all three atoms. Uses: an inert atmosphere for chemical processing; photosynthesis; fire extinguishers and propellant; fizzy drinks and foams. Solid CO₂ is dry ice.

Worked example 2: CO from methanoic acid

What mass of CO is obtained from 9.20 g of HCOOH, and how much Fe₂O₃ could it reduce? Use C = 12.01, O = 16.00, H = 1.008, Fe = 55.85. Working: M(HCOOH) = 46.03 g mol⁻¹, so 9.20 g = 0.200 mol giving 0.200 mol CO = 0.200 × 28.01 = 5.60 g CO. Fe₂O₃ + 3CO → 2Fe + 3CO₂ needs 3 mol CO per mol Fe₂O₃, so Fe₂O₃ = 0.200 ÷ 3 = 0.0667 mol = 0.0667 × 159.70 = 10.6 g.

Key takeaways: AlCl₃ hydrolyses (acidic) and is a Lewis-acid catalyst; alums are M′₂SO₄·M″₂(SO₄)₃·24H₂O, potash alum purifies water. Carbon catenates best; graphite (sp², conducts) and diamond (sp³, hard) differ by bonding; C₆₀ has 12 pentagons and 20 hexagons. CO is a poisonous reducing agent and ligand; CO₂ is linear, stable and weakly acidic in water.

Check your understanding

  1. 1. Which of the following is NOT sp² hybridised?

    1. Graphite
    2. Graphene
    3. Fullerene
    4. Dry ice
    Show answer

    Answer: D. Graphite, graphene and fullerenes all contain sp² carbon. Dry ice is solid CO₂, whose carbon is sp hybridised (linear O=C=O).

  2. 2. The number of five-membered rings in buckminsterfullerene, C₆₀, is

    1. 12
    2. 20
    3. 6
    4. 30
    Show answer

    Answer: A. C₆₀ is a fused cage of 20 six-membered rings and 12 five-membered rings, like the panels of a football.

  3. 3. Why is an aqueous solution of AlCl₃ acidic?

    1. AlCl₃ releases Cl₂.
    2. AlCl₃ is hydrolysed, forming Al(OH)₃ and HCl.
    3. Al³⁺ ions are bases.
    4. It absorbs CO₂ from air.
    Show answer

    Answer: B. AlCl₃ + 3H₂O → Al(OH)₃ + 3HCl. The HCl (a strong acid) makes the solution acidic; this hydrolysis is also why anhydrous AlCl₃ fumes in moist air.

  4. 4. Pure carbon monoxide is prepared in the laboratory by

    1. burning coke in excess air
    2. heating CaCO₃
    3. warming methanoic acid with concentrated sulphuric acid
    4. passing steam over hot coke
    Show answer

    Answer: C. Concentrated H₂SO₄ removes water from HCOOH: HCOOH → CO + H₂O. Coke in excess air gives CO₂; CaCO₃ gives CO₂; steam and coke give water gas (CO + H₂), which is not pure CO.

  5. 5. How many grams of carbon are deposited when 4.86 g of magnesium burns completely in CO₂? (Mg = 24.3, C = 12.0)

    1. 2.40 g
    2. 1.20 g
    3. 0.60 g
    4. 4.86 g
    Show answer

    Answer: B. CO₂ + 2Mg → 2MgO + C. Moles of Mg = 4.86 ÷ 24.3 = 0.200 mol, giving 0.200 ÷ 2 = 0.100 mol C = 0.100 × 12.0 = 1.20 g.

Privacy · Terms · Refunds · Delivery