- Practice
- About 24 min
- 5 practice questions
Silicon tetrachloride, silicones, silicates and zeolites
Prepare SiCl₄ and write its hydrolysis, alcoholysis and ammonolysis, explain how silicones form and why they are useful, classify silicates by how their SiO₄ tetrahedra are shared, and describe zeolites.
If something looks wrong, please tell us.
By the end of this lesson you can
- Prepare SiCl₄ and write its reactions with water, alcohol and ammonia.
- Show how R₂SiCl₂, RSiCl₃ and R₃SiCl lead to linear, cross-linked or end-capped silicones.
- List the properties and uses of silicones.
- Classify silicates and work out the charge of each silicate anion; describe zeolites.
Silicon is the second most abundant element in the earth's crust, and most of that silicon is bound to oxygen in silicates. Chemists also join silicon to carbon groups to make silicones, heat-proof polymers used from cookware to electrical insulation.
Silicon tetrachloride, SiCl₄
Preparation: dry chlorine is passed over a heated (about 1675 K) mixture of silica and carbon in a porcelain tube, SiO₂ + 2C + 2Cl₂ → SiCl₄ + 2CO (check: Si 1; O 2 = 2; C 2; Cl 4). Commercially, silicon reacts with hydrogen chloride above 600 K: Si + 4HCl → SiCl₄ + 2H₂.
- A colourless fuming liquid that freezes at about −70 °C.
- Hydrolysis in moist air: SiCl₄ + 2H₂O → SiO₂ + 4HCl. With moist ether it gives linear perchlorosiloxanes Cl–(SiCl₂O)n–SiCl₃ (n = 1–6).
- Alcoholysis: SiCl₄ + 4C₂H₅OH → Si(OC₂H₅)₄ + 4HCl (tetraethoxysilane, a silicic ester).
- Ammonolysis: 2SiCl₄ + NH₃ → Cl₃Si–NH–SiCl₃ + 2HCl (a chlorosilazane).
- Uses: making semiconductor-grade silicon; starting material for silica gel and silicic esters; a binder for ceramics.
Worked example 1: why SiCl₄ hydrolyses but CCl₄ does not
Both are tetrahedral tetrachlorides. Working: silicon is a larger atom with vacant 3d orbitals, so a water molecule can attach to silicon (raising its coordination temporarily) and then HCl is lost, step by step, until SiO₂ (via Si(OH)₄) remains. Carbon is small and has no d orbitals in its valence shell, so water cannot approach carbon in CCl₄, and CCl₄ does not hydrolyse under ordinary conditions. This is one more example of the anomalous first element (lesson 1).
Silicones
Silicones (polysiloxanes) are organosilicon polymers with the empirical formula (R₂SiO), where R is an alkyl or aryl group. The name comes from the likeness to a ketone, R₂CO; but unlike a ketone, silicon does not form a stable Si=O double bond, so the units join through Si–O–Si links into long chains. Because of their very high thermal stability they are called high-temperature polymers.
Preparation: the chlorosilanes are made by passing an alkyl or aryl chloride over silicon at 570 K with copper as catalyst: 2RCl + Si → R₂SiCl₂. Hydrolysis replaces Cl by OH: R₂SiCl₂ + 2H₂O → R₂Si(OH)₂ + 2HCl. The silanol molecules then lose water between their –OH groups (condensation) to form –O–SiR₂–O–SiR₂– chains growing from both ends.
Which chlorosilane gives which silicone
-
R₂SiCl₂ (two Cl)
- Two –OH after hydrolysis
- Chain grows in two directions
- Linear chains; or rings if the ends join
-
RSiCl₃ (three Cl)
- Three –OH after hydrolysis
- Links in three directions
- Complex cross-linked polymer
-
R₃SiCl (one Cl)
- Only one –OH
- Cannot build a chain
- Caps the chain ends: controls length
Types (as classified in the Tamil Nadu textbook): (i) linear silicones, from hydrolysis and condensation of dialkyl or diaryl silicon chlorides, including silicone rubbers (chains bridged by methylene or similar groups) and silicone resins (silicones blended with organic resins such as acrylic esters); (ii) cyclic silicones, from R₂SiCl₂, when water is lost from the two end –OH groups of a chain; (iii) cross-linked silicones, from RSiCl₃.
- They range from oily liquids to rubbery solids, depending on chain length and cross-linking.
- All are water-repellent: the organic groups surrounding silicon make the molecule look like an alkane.
- Good thermal and electrical insulators; chemically inert.
- The viscosity of silicone oil hardly changes with temperature, so it does not thicken in winter.
- Uses: low-temperature lubricants, vacuum pumps and high-temperature oil baths; waterproofing clothes; insulation in motors; added to paints and enamels to resist heat, sunlight, damp and chemicals.
Silicates
Silicates are minerals built from [SiO₄]⁴⁻ tetrahedra (Si at the centre, O at the corners) joined in different patterns. According to the textbook, nearly 95% of the earth's crust is silicate minerals and silica; glass and ceramics are based on their chemistry. The type of silicate depends on how many corners (oxygen atoms) each tetrahedron shares.
| Type | Corners shared per SiO₄ | Anion | Example |
|---|---|---|---|
| Ortho (neso) | 0 (discrete units) | [SiO₄]⁴⁻ | Phenacite Be₂SiO₄; olivine (Fe,Mg)₂SiO₄ |
| Pyro (soro) | 1 (two units share one O) | [Si₂O₇]⁶⁻ | Thortveitite Sc₂Si₂O₇ |
| Cyclic (ring) | 2, closed into a ring of 3 or more | (SiO₃)ₙ²ⁿ⁻ | Beryl Be₃Al₂(SiO₃)₆ |
| Chain (pyroxenes) | 2, in an open chain | (SiO₃)ₙ²ⁿ⁻ | Spodumene LiAl(SiO₃)₂ |
| Double chain (amphiboles) | Alternately 2 and 3 | (Si₄O₁₁)ₙ⁶ⁿ⁻ | Asbestos (fibrous; use restricted as it causes cancer) |
| Sheet (phyllo) | 3, forming 2-D sheets | (Si₂O₅)ₙ²ⁿ⁻ | Talc, mica (cleave easily, like graphite) |
| Three-dimensional (tecto) | All 4 | (SiO₂)ₙ | Quartz; with some Si replaced by Al: feldspar, zeolites |
Worked example 2: the charge on a silicate anion
Every Si is +4 and every O is −2. (a) [Si₂O₇]: 2(+4) + 7(−2) = 8 − 14 = −6. (b) A chain unit SiO₃: 4 − 6 = −2 per unit, so (SiO₃)n carries 2n−. (c) A sheet unit Si₂O₅: 8 − 10 = −2. (d) Double chain Si₄O₁₁: 16 − 22 = −6. (e) In SiO₂, 4 − 4 = 0, a neutral network. Replacing one Si⁴⁺ by Al³⁺ makes [AlO₄]⁵⁻ (3 − 8 = −5), so each Al brings one extra negative charge that a cation such as Na⁺ or K⁺ must balance; that is how feldspars and zeolites arise.
Worked example 3: counting oxygen from corner sharing
Each shared oxygen belongs to two tetrahedra, so it counts as ½ for each. A tetrahedron sharing k corners therefore has (4 − k) + k/2 oxygen atoms. k = 0: 4 (SiO₄); k = 1: 3.5, i.e. Si₂O₇; k = 2: 3 (SiO₃); k = 3: 2.5, i.e. Si₂O₅; k = 4: 2 (SiO₂). For a double chain, half the units share 2 and half share 3 corners, average 2.75 O per Si, i.e. Si₄O₁₁.
Zeolites
Zeolites are three-dimensional crystalline hydrated sodium aluminosilicates, Na₂O·Al₂O₃·xSiO₂·yH₂O (x = 2 to 10, y = 2 to 6). Si and Al are tetrahedrally linked through shared oxygens into a rigid, honeycomb-like framework of tunnels and cages holding loosely bound Na⁺ ions and water. Water moves freely in and out without the framework collapsing, and because the pores are nearly uniform in size, zeolites act as molecular sieves. They are also used to remove permanent hardness of water, by exchanging their Na⁺ for Ca²⁺ and Mg²⁺.
Key takeaways: SiCl₄ hydrolyses to SiO₂ + HCl (CCl₄ does not). Silicones (R₂SiO)n come from hydrolysis and condensation of chlorosilanes: R₂SiCl₂ → chains or rings, RSiCl₃ → cross-links, R₃SiCl → chain ends; they are water-repellent, inert, heat-stable insulators. Silicates are classified by corners shared: 0, 1, 2, 2/3, 3, 4. Zeolites are porous aluminosilicate sieves.
Check your understanding
-
1. The basic structural unit of silicates is
- SiO₃²⁻
- SiO₄²⁻
- SiO₄⁴⁻
- SiO⁻
Show answer
Answer: C. Every silicate is built from SiO₄ tetrahedra: Si (+4) with four O (−2 each) gives 4 − 8 = −4, so the unit is SiO₄⁴⁻.
-
2. Which of these is NOT a monomer for a high molecular mass silicone polymer?
- Me₃SiCl
- PhSiCl₃
- MeSiCl₃
- Me₂SiCl₂
Show answer
Answer: A. Me₃SiCl has only one Cl, so after hydrolysis it has one –OH and can join only one other unit: it ends a chain rather than building one. Me₂SiCl₂ gives chains; MeSiCl₃ and PhSiCl₃ give cross-linked polymers.
-
3. Which statement is NOT correct?
- Beryl is a cyclic silicate.
- Mg₂SiO₄ is an orthosilicate.
- SiO₄⁴⁻ is the basic unit of silicates.
- Feldspar is not an aluminosilicate.
Show answer
Answer: D. Feldspar is a three-dimensional aluminosilicate, formed when some SiO₄ units of a tecto-silicate are replaced by AlO₄ units. The other three statements are correct.
-
4. Silicones are water-repellent because
- they contain many –OH groups
- the organic groups around silicon make the surface alkane-like
- they are ionic
- they contain Si=O double bonds
Show answer
Answer: B. The R groups (such as methyl) surround the Si–O backbone, so water meets a hydrocarbon-like surface and is repelled.
-
5. In a sheet silicate each SiO₄ tetrahedron shares three corners. What is the empirical formula of the anion?
- SiO₃²⁻
- Si₄O₁₁⁶⁻
- Si₂O₇⁶⁻
- Si₂O₅²⁻
Show answer
Answer: D. Oxygen per Si = (4 − 3) + 3 × ½ = 2.5, i.e. Si₂O₅. Charge = 2(+4) + 5(−2) = −2, so (Si₂O₅)ₙ²ⁿ⁻, as in talc and mica.
Sign in to keep track of the lessons you finish.