• Practice
  • About 22 min
  • 5 practice questions

Group 13: boron, its reactions and borax

Describe the occurrence and properties of group 13 elements, write balanced equations for the reactions of boron, list its uses, and prepare borax and describe its properties and uses.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the ores of boron and aluminium and state trends in group 13 physical properties.
  • Write balanced equations for boron forming borides, diborane, halides, nitride and oxide, and reacting with oxidising acids and fused alkali.
  • List the uses of boron.
  • Prepare borax from colemanite and write its reactions with water, heat, acids and NH₄Cl.

Group 13 contains B, Al, Ga, In and Tl. Boron is the only non-metal; its compounds are often electron-deficient and show unusual bonding. Borax, one of its compounds, is a household chemical as well as a laboratory reagent.

Occurrence and physical properties

Boron occurs mostly as borates: borax Na₂[B₄O₅(OH)₄]·8H₂O and kernite Na₂[B₄O₅(OH)₄]·2H₂O. Aluminium is the most abundant metal in the earth's crust, found as oxides and aluminosilicate rocks, and is extracted from bauxite. Ga, In and Tl occur only in traces, as sulphides.

Some data from table 2.3 of the Tamil Nadu textbook
PropertyBAlGaInTl
Atomic number513314981
Outer configuration[He]₂s² 2p¹[Ne]₃s² 3p¹[Ar]₃d¹⁰ 4s² 4p¹[Kr]₄d¹⁰ 5s² 5p¹[Xe]₄f¹⁴ 5d¹⁰ 6s² 6p¹
Atomic mass (g mol⁻¹)10.8126.9869.72114.81204.38
Melting point (K)2350933302.76429577

Notice gallium: it melts at about 303 K, just above room temperature, so it melts in a warm hand, yet it boils far higher, giving it one of the longest liquid ranges of any element.

Chemical properties of boron

Boron is unreactive at room temperature but reacts when heated. Its small size, high ionisation energy and electronegativity similar to carbon and hydrogen give it covalent, often electron-deficient, compounds.

  • Metal borides MxBy (not with alkali metals): by direct combination, Cr + nB → CrBn (1500 K); or by reducing BCl₃ with a metal and H₂: 2BCl₃ + 2W + H₂ → 2WB + 2Cl₂ + 2HCl (1500 K; check: Cl 6 = 4 + 2, H 2 = 2).
  • Boranes: boron does not combine directly with hydrogen. Diborane is made from BF₃ and sodium hydride at about 450 K and trapped at once to prevent its breakdown: 2BF₃ + 6NaH → B₂H₆ + 6NaF (check: B 2; F 6; Na 6; H 6).
  • Halides at high temperature: 2B + 3X₂ → 2BX₃.
  • Boron nitride: 2B + N₂ → 2BN on strong heating.
  • Oxide at about 900 K: 4B + 3O₂ → 2B₂O₃.
  • Oxidising acids (not hydrohalic acids): 2B + 3H₂SO₄ → 2H₃BO₃ + 3SO₂; B + 3HNO₃ → H₃BO₃ + 3NO₂.
  • Fused sodium hydroxide: 2B + 6NaOH → 2Na₃BO₃ + 3H₂ (sodium borate).

Worked example 1: balancing boron with nitric acid

Check B + 3HNO₃ → H₃BO₃ + 3NO₂ by oxidation states. Working: B goes 0 → +3 (loses 3 e⁻). N goes +5 in HNO₃ to +4 in NO₂ (gains 1 e⁻ each). So 3 NO₂ are needed for each B: electrons lost 3 = electrons gained 3 × 1. Atom check: B 1 = 1; H 3 = 3; N 3 = 3; O 9 = 3 + 6. Balanced.

Uses of boron

  • Boron-10 absorbs neutrons strongly, so boron and metal borides are used in nuclear reactors as control rods and protective shields (the textbook calls it a 'moderator'; strictly it absorbs, rather than slows, neutrons).
  • Amorphous boron is used as an igniter in rocket fuels.
  • Boron is essential for the cell walls of plants.
  • Borax and boric acid are used in eye drops, antiseptics and washing powders; boric oxide is used to make Pyrex (borosilicate) glass.
  • Boron neutron capture therapy (described in the textbook): boron-10 compounds collect in a brain tumour, and when irradiated with slow neutrons each captured neutron releases an α particle that damages the tumour while sparing most normal tissue.

Borax, Na₂B₄O₇·10H₂O

Borax is the sodium salt of tetraboric acid. It is made by boiling the ore colemanite with sodium carbonate solution:

2Ca₂B₆O₁₁ + 3Na₂CO₃ + H₂O → 3Na₂B₄O₇ + 3CaCO₃ + Ca(OH)₂

Check: Ca 4 = 3 + 1; B 12 = 12; Na 6 = 6; C 3 = 3; H 2 = 2; O 22 + 9 + 1 = 32 and 21 + 9 + 2 = 32. Although written Na₂B₄O₇·10H₂O, the crystal really contains the tetranuclear ion [B₄O₅(OH)₄]²⁻; this is the prismatic form. Two other forms are jeweller's (octahedral) borax, Na₂B₄O₇·5H₂O, and borax glass, Na₂B₄O₇.

Properties of borax

  • Alkaline in water: it hydrolyses to a weak acid and a strong base, Na₂B₄O₇ + 7H₂O → 4H₃BO₃ + 2NaOH (check: H 14 = 12 + 2; O 14 = 12 + 2).
  • Borax bead: on heating it loses water, swells and fuses to a transparent glass: Na₂B₄O₇·10H₂O → Na₂B₄O₇ → 2NaBO₂ + B₂O₃. The bead gives characteristic colours with metal oxides, used to identify coloured metal ions.
  • With acids it gives sparingly soluble boric acid: Na₂B₄O₇ + 2HCl + 5H₂O → 4H₃BO₃ + 2NaCl; Na₂B₄O₇ + H₂SO₄ + 5H₂O → 4H₃BO₃ + Na₂SO₄.
  • With ammonium chloride it gives boron nitride: Na₂B₄O₇ + 2NH₄Cl → 2NaCl + 2BN + B₂O₃ + 4H₂O (check: B 4 = 2 + 2; N 2; O 7 = 3 + 4; H 8 = 8).

Borax at a glance

  • Made from
    • Colemanite + Na₂CO₃, boiled
  • Forms
    • Prismatic Na₂B₄O₇·10H₂O
    • Jeweller's Na₂B₄O₇·5H₂O
    • Borax glass Na₂B₄O₇
  • Reactions
    • Water: alkaline solution
    • Heat: glassy bead NaBO₂ + B₂O₃
    • Acids: boric acid
    • NH₄Cl: boron nitride
  • Uses
    • Bead test for coloured ions
    • Optical and borosilicate glass, enamels, glazes
    • Flux in metallurgy; preservative

Worked example 2: water in borax

What percentage of borax decahydrate is water? Use Na = 22.99, B = 10.81, O = 16.00, H = 1.008. Working: M(Na₂B₄O₇) = 2 × 22.99 + 4 × 10.81 + 7 × 16.00 = 45.98 + 43.24 + 112.00 = 201.22 g mol⁻¹. M(10H₂O) = 10 × 18.02 = 180.2 g mol⁻¹. M(decahydrate) = 201.22 + 180.2 = 381.4 g mol⁻¹. % water = 180.2 ÷ 381.4 × 100 = 47.2%. Nearly half of a borax crystal is water, which is why it swells so much on heating.

Worked example 3: oxidation state of boron in borax

In Na₂B₄O₇: 2(+1) + 4x + 7(−2) = 0, so 4x = 14 − 2 = 12 and x = +3, the group oxidation state of boron.

Key takeaways: boron reacts only when heated, giving borides, boranes (via BF₃ + NaH), halides, BN and B₂O₃; oxidising acids give H₃BO₃ and fused NaOH gives Na₃BO₃. Borax (from colemanite) is alkaline in water, forms a glassy bead, gives boric acid with acids and BN with NH₄Cl.

Check your understanding

  1. 1. An aqueous solution of borax is

    1. neutral
    2. acidic
    3. amphoteric
    4. basic
    Show answer

    Answer: D. Na₂B₄O₇ + 7H₂O → 4H₃BO₃ + 2NaOH. Boric acid is very weak and NaOH is strong, so the solution is alkaline (basic).

  2. 2. Diborane is prepared industrially from

    1. boron and hydrogen gas
    2. BF₃ and sodium hydride at about 450 K
    3. borax and HCl
    4. B₂O₃ and water
    Show answer

    Answer: B. Boron does not combine directly with hydrogen. The textbook's method is 2BF₃ + 6NaH → B₂H₆ + 6NaF at about 450 K, with the diborane trapped at once.

  3. 3. Which product forms when boron reacts with fused sodium hydroxide?

    1. Na₃BO₃ and H₂
    2. NaBO₂ and O₂
    3. Na₂B₄O₇ and H₂O
    4. H₃BO₃ and Na
    Show answer

    Answer: A. 2B + 6NaOH → 2Na₃BO₃ + 3H₂. Check: Na 6 = 6; O 6 = 6; H 6 = 6; B 2 = 2.

  4. 4. Which compound of boron is used in nuclear reactors as protective shields and control rods?

    1. Boric acid
    2. Borax
    3. Metal borides
    4. Diborane
    Show answer

    Answer: C. Metal borides contain boron-10, which absorbs neutrons strongly, and they are hard and stable at high temperature, so they suit control rods and shields.

  5. 5. How many moles of boric acid are formed when 0.5 mol of borax (Na₂B₄O₇) reacts completely with HCl?

    1. 0.5 mol
    2. 2 mol
    3. 4 mol
    4. 1 mol
    Show answer

    Answer: B. Na₂B₄O₇ + 2HCl + 5H₂O → 4H₃BO₃ + 2NaCl. One mole of borax gives 4 mol H₃BO₃, so 0.5 mol gives 0.5 × 4 = 2 mol (boron balance: 0.5 × 4 B = 2 B).

Privacy · Terms · Refunds · Delivery