• Practice
  • About 24 min
  • 5 practice questions

General trends in the p-block: configuration, metallic nature, inert pair effect and allotropy

Write the outer configuration and oxidation states of groups 13-18, explain trends in metallic character, ionisation enthalpy and electronegativity, the anomalous first elements, the inert pair effect and allotropy.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Give the general outer configuration ns² np¹⁻⁶ and the group names and oxidation states of groups 13-18.
  • Explain how metallic character, ionisation enthalpy and electronegativity change down a group, including the irregularities in groups 13 and 14.
  • List the reasons for the anomalous behaviour of the first element of each group, with examples.
  • Explain the inert pair effect with thallium and define allotropy.

The p-block elements are those whose last electron enters a p orbital. They fill groups 13 to 18, headed by B, C, N, O, F and He (helium is placed in group 18 although its configuration is 1s²). The block contains metals, metalloids and non-metals: oxygen keeps us alive, aluminium builds aircraft, and silicon and germanium made modern electronics possible. This unit of the Tamil Nadu textbook studies the general trends and then groups 13 (boron family) and 14 (carbon family).

Electronic configuration and oxidation states

The general outer configuration is ns² np¹⁻⁶. Elements of a group differ only in n. Group 18 has a completely filled p subshell, which is why these gases are very unreactive (inert gases). The highest or group oxidation state equals the number of valence electrons. Unlike s-block elements, many p-block elements also show negative oxidation states: halogens readily gain one electron to reach a noble-gas configuration, so −1 is common.

Groups of the p-block, following table 2.1 of the Tamil Nadu textbook
GroupNameOuter configurationGroup oxidation stateOther common states
13Icosagensns² np¹+3+1
14Tetragensns² np²+4+2, −4
15Pnictogensns² np³+5+3, −3
16Chalcogensns² np⁴+6+4, +2, −2
17Halogensns² np⁵+7+5, +3, +1, −1
18Inert gasesns² np⁶+8+6, +4, +2

Metallic character

Metallic (electropositive) character is the tendency to lose electrons and form cations. It depends on ionisation energy: down a group ionisation energy falls, so metallic character rises. Metals sit at the lower left of the p-block and non-metals at the upper right. Boron is a metalloid (small atom, high nuclear charge), the rest of group 13 are metals. In group 14, C is a non-metal, Si and Ge are metalloids, Sn and Pb are metals. In group 15, N and P are non-metals and As and Sb metalloids; in group 16, O, S and Se are non-metals and Te a metalloid; groups 17 and 18 are entirely non-metals.

Ionisation enthalpy and electronegativity

Down a group, ionisation enthalpy usually falls as atoms get bigger. In group 13 it falls from B to Al as expected, but from Al to Tl it changes only slightly. Ga, In and Tl have filled inner d (and for Tl, f) subshells, which shield the outer electrons poorly; the effective nuclear charge felt by the valence electrons rises and offsets the larger size. Group 14 shows a similar pattern. In groups 15–18 the extra p electrons provide enough shielding, and ionisation enthalpy falls steadily down the group. Across a period, each group has higher ionisation enthalpy than the one before.

Electronegativity in group 13 falls from B to Al, rises slightly at Ga and then stays nearly the same; group 14 is similar. In the other groups it decreases steadily down the group, in line with atomic size.

Anomalous behaviour of the first element

The first member of each group differs from the rest because of (1) its small size, (2) its high ionisation enthalpy and electronegativity, and (3) the absence of d orbitals in its valence shell.

  • Boron is a metalloid while Al, Ga, In, Tl are reactive metals. It shows a diagonal relationship with silicon: both have acidic oxides, both form covalent hydrides that are easily hydrolysed, and their halides (except BF₃) hydrolyse readily.
  • Carbon is strictly a non-metal, forms multiple bonds (C=C, C=O) and shows extensive catenation, which falls sharply down the group: C >> Si > Ge ≈ Sn > Pb.
  • Nitrogen forms multiple bonds (N≡N, C≡N, N=O) and is a diatomic gas, unlike the rest of group 15.
  • Oxygen is a diatomic gas and, being very electronegative, forms hydrogen bonds.
  • Fluorine is the most electronegative element, forms hydrogen bonds, shows only the −1 state (other halogens also show +1, +3, +5, +7), and is the strongest oxidising agent and most reactive halogen.

The inert pair effect

For the heavier post-transition elements of groups 13–16, the most stable oxidation state is often two less than the group oxidation state. In group 13, Al³⁺ is more stable than Al⁺, but Tl⁺ is more stable than Tl³⁺. AlCl₃ is stable, whereas TlCl₃ is unstable and breaks down to TlCl and Cl₂. In thallium, only the np electron is readily lost; the ns² pair stays inert and reluctant to bond. This is the inert pair effect, also seen in groups 14 (Pb²⁺ more stable than Pb⁴⁺), 15 and 16.

Inert pair effect down group 13

  1. B, Al +3 is the stable state; ns² np¹ all used in bonding.
  2. Ga, In +1 becomes increasingly possible.
  3. Tl +1 is more stable than +3; the 6s² pair stays inert.
Stability of +1 rises in the order Al < Ga < In < Tl.

Worked example 1: oxidation state and the inert pair

Find the oxidation state of thallium in TlCl₃ and in TlI₃, and comment. Working: TlCl₃: x + 3(−1) = 0, so x = +3. TlI₃ is actually Tl⁺(I₃)⁻, the triiodide ion; with I₃⁻ carrying −1 overall, x − 1 = 0, so x = +1. Iodide is a weak oxidant, so it cannot hold thallium at +3, while thallium's preference for +1 (the inert pair) wins. This is exactly what the inert pair effect predicts.

Allotropy

Allotropy (Greek allos, another; tropos, change) is the existence of an element in more than one crystalline or molecular form in the same physical state. Many p-block elements show it.

ElementSome allotropes (from the Tamil Nadu textbook)
BoronAmorphous boron; α- and β-rhombohedral; γ-orthorhombic; α- and β-tetragonal
CarbonDiamond, graphite, graphene, fullerenes, carbon nanotubes
SiliconAmorphous and crystalline
TinGrey tin, white tin and others
PhosphorusWhite, red, scarlet, violet, black
OxygenDioxygen O₂, ozone O₃
SulphurRhombic and monoclinic

Worked example 2: using the trends

Arrange B, Al, Ga by first ionisation enthalpy and explain. Working: B is much smaller, so it is highest. Al is larger, so lower. Ga is larger still, but its ten 3d electrons shield poorly, raising the effective nuclear charge; its ionisation enthalpy ends up very close to (in fact slightly above) that of Al. So the order is B > Ga ≥ Al, not the simple B > Al > Ga a student might first guess.

Down a p-block group: size up, metallic character up; ionisation enthalpy and electronegativity down, except for the d/f-shielding plateau in groups 13 and 14. Heavy elements prefer (group oxidation state − 2): inert pair effect.

Key takeaways: ns² np¹⁻⁶; group oxidation state = valence electrons, negative states for non-metals. Poor d and f shielding flattens trends in groups 13 and 14. First members are anomalous (small size, high electronegativity, no d orbitals). Heavy elements favour the lower state. Allotropy is common in the p-block.

Check your understanding

  1. 1. The group oxidation state of a pnictogen is

    1. +3
    2. +5
    3. −3
    4. +6
    Show answer

    Answer: B. Pnictogens (group 15) have ns² np³, five valence electrons, so the highest (group) oxidation state is +5. +3 and −3 are other common states.

  2. 2. Why does the ionisation enthalpy change only slightly from Al to Tl?

    1. Their atomic radii are identical.
    2. They all have filled p subshells.
    3. Inner d and f electrons shield the valence electrons poorly, raising the effective nuclear charge.
    4. They are all non-metals.
    Show answer

    Answer: C. Ga, In and Tl have filled inner d (and f for Tl) subshells. These shield poorly, so the valence electrons feel a larger effective nuclear charge, which offsets the increase in size.

  3. 3. The stability of the +1 oxidation state increases in the order

    1. Al < Ga < In < Tl
    2. Tl < In < Ga < Al
    3. In < Tl < Ga < Al
    4. Ga < In < Al < Tl
    Show answer

    Answer: A. The inert pair effect grows down the group, so the +1 state becomes steadily more stable from Al to Tl.

  4. 4. Which is NOT a reason for the anomalous behaviour of the first element of a p-block group?

    1. Small size
    2. High electronegativity
    3. No d orbitals in the valence shell
    4. Presence of a vacant f subshell
    Show answer

    Answer: D. The textbook lists small size, high ionisation enthalpy and electronegativity, and the absence of d orbitals. f orbitals have nothing to do with B, C, N, O or F.

  5. 5. Boron shows a diagonal relationship with

    1. aluminium
    2. carbon
    3. silicon
    4. magnesium
    Show answer

    Answer: C. Boron (group 13, period 2) resembles silicon (group 14, period 3): both have acidic oxides, covalent hydrolysable hydrides, and easily hydrolysed halides.

Privacy · Terms · Refunds · Delivery