• Practice
  • About 26 min
  • 5 practice questions

Boric acid, diborane and boron trifluoride

Prepare boric acid and explain why it is a weak Lewis acid, write its reactions including the ethyl borate test, describe diborane's reactions and three-centre two-electron bonding, and give the chemistry of BF₃.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Prepare boric acid and explain its acidity by OH⁻ acceptance.
  • Write the effect of heat on boric acid and the ethyl borate test.
  • Prepare diborane by three methods and write its reactions, including hydroboration and borazine formation.
  • Explain the 3c-2e bonds of diborane and the Lewis-acid behaviour of BF₃.

Boric acid, diborane and BF₃ all have boron with only six electrons around it in its simple bonds. That electron deficiency explains why boric acid accepts OH⁻, why diborane needs bridge bonds, and why BF₃ accepts electron pairs.

Boric acid, H₃BO₃ or B(OH)₃

Preparation: from borax with acid, Na₂B₄O₇ + H₂SO₄ + 5H₂O → 4H₃BO₃ + Na₂SO₄; or from colemanite with SO₂ and water, Ca₂B₆O₁₁ + 11H₂O + 4SO₂ → 2Ca(HSO₃)₂ + 6H₃BO₃ (check: Ca 2; B 6; S 4; H 22 = 4 + 18; O 11 + 11 + 8 = 30 and 12 + 18 = 30).

Acidity: boric acid forms colourless, transparent crystals. It is a very weak monobasic acid, but it does not give up its own proton. Instead its boron accepts an OH⁻ from water, releasing a proton, so it is a Lewis acid:

B(OH)₃ + 2H₂O ⇌ [B(OH)₄]⁻ + H₃O⁺

Check: B 1; O 3 + 2 = 4 + 1; H 3 + 4 = 4 + 3. With NaOH it forms sodium metaborate or tetraborate: H₃BO₃ + NaOH → NaBO₂ + 2H₂O; 4H₃BO₃ + 2NaOH → Na₂B₄O₇ + 7H₂O.

Action of heat

Heating boric acid

  1. Boric acid H₃BO₃ Start
  2. Metaboric acid HBO₂ At 373 K: 4H₃BO₃ → 4HBO₂ + 4H₂O
  3. Tetraboric acid H₂B₄O₇ At 413 K: 4HBO₂ → H₂B₄O₇ + H₂O
  4. Boric anhydride B₂O₃ Red hot: H₂B₄O₇ → 2B₂O₃ + H₂O, a glassy mass

Other reactions

  • Boron nitride: fusing with urea in ammonia at 800–1200 K, B(OH)₃ + NH₃ → BN + 3H₂O.
  • Ethyl borate test: heated with ethanol and conc. H₂SO₄, H₃BO₃ + 3C₂H₅OH → B(OC₂H₅)₃ + 3H₂O. The vapour of triethyl borate burns with a green-edged flame, identifying a borate. (Trialkyl borates with sodium hydride in THF give Na[BH(OR)₃], a powerful reducing agent.)
  • BF₃: 3CaF₂ + 3H₂SO₄ + 2B(OH)₃ → 3CaSO₄ + 2BF₃ + 6H₂O.
  • Borax from soda ash: Na₂CO₃ + 4B(OH)₃ → Na₂B₄O₇ + CO₂ + 6H₂O (check: O 3 + 12 = 7 + 2 + 6 = 15; H 12 = 12).

Structure: boric acid has a two-dimensional layered structure: planar BO₃ units are joined by hydrogen bonds into flat sheets, which makes the crystals soft and flaky. Uses: glazes, enamels and pigments for pottery; antiseptic and eye lotion; food preservative.

Diborane, B₂H₆

  • Industrially: 2BF₃ + 6NaH → B₂H₆ + 6NaF (lesson 2).
  • In small amounts, iodine with sodium borohydride in diglyme: 2NaBH₄ + I₂ → B₂H₆ + 2NaI + H₂ (check: H 8 = 6 + 2).
  • Magnesium boride with HCl gives a mixture of boranes: 2Mg₃B₂ + 12HCl → 6MgCl₂ + B₄H₁₀ + H₂, then B₄H₁₀ + H₂ → 2B₂H₆.

Properties: boranes are colourless, diamagnetic and of low thermal stability. Diborane is a sweet-smelling, extremely toxic, highly reactive gas. Heated under various conditions it gives higher boranes, for example 2B₂H₆ → B₄H₁₀ + H₂, 5B₂H₆ → 2B₅H₉ + 6H₂, 5B₂H₆ → B₁₀H₁₄ + 8H₂, and at red heat B₂H₆ → 2B + 3H₂.

  • Water: B₂H₆ + 6H₂O → 2H₃BO₃ + 6H₂ (check: H 6 + 12 = 6 + 12).
  • Alkali: B₂H₆ + 2NaOH + 2H₂O → 2NaBO₂ + 6H₂.
  • Air: pure diborane does not react at room temperature, but impure diborane burns with a very large release of heat: B₂H₆ + 3O₂ → B₂O₃ + 3H₂O.
  • Methanol: B₂H₆ + 6CH₃OH → 2B(OCH₃)₃ + 6H₂ (trimethyl borate).
  • Hydroboration: in ether at room temperature, diborane adds across alkenes and alkynes, B₂H₆ + 6RCH=CHR → 2(RCH₂–CHR)₃B; it is used in organic synthesis for anti-Markovnikov addition.
  • Ionic hydrides give borohydrides: B₂H₆ + 2LiH → 2LiBH₄; B₂H₆ + 2NaH → 2NaBH₄.
  • Ammonia: excess NH₃ at low temperature gives diborane diammoniate, 3B₂H₆ + 6NH₃ → 3[BH₂(NH₃)₂]⁺[BH₄]⁻; heating it in a closed vessel gives borazine (borazole), the 'inorganic benzene': 3B₂H₆·2NH₃ → 2B₃N₃H₆ + 12H₂ (check: B 6; N 6; H 36 = 12 + 24).

Structure of diborane: banana bonds

If each B–H were a normal bond, B₂H₆ would need 8 bonds × 2 = 16 electrons, but it has only 2 × 3 + 6 × 1 = 12 valence electrons. The structure: two BH₂ groups joined by two bridging hydrogens, which lie in a plane at right angles to the plane of the four terminal H atoms. Each boron is sp³ hybridised: two half-filled hybrids bond to terminal H (four normal 2c-2e bonds, 8 electrons); each B–H–B bridge is formed by a half-filled sp³ orbital of one boron, the empty sp³ orbital of the other and the 1s orbital of the bridging hydrogen, holding just two electrons over three centres (3c-2e). Two bridges × 2 = 4 electrons. Total 8 + 4 = 12. The curved bridge bonds are called banana bonds.

Bonds in diborane

  • Terminal B–H bonds
    • Four of them
    • 2-centre 2-electron
    • 8 electrons in all
    • In one plane with both B atoms
  • Bridging B–H–B bonds
    • Two of them
    • 3-centre 2-electron (banana)
    • 4 electrons in all
    • Bridge H above and below that plane

Uses of diborane: high-energy propellant fuel, reducing agent in organic chemistry, welding torches.

Boron trifluoride, BF₃

Preparation: B₂O₃ + 3CaF₂ + 3H₂SO₄ → 2BF₃ + 3CaSO₄ + 3H₂O on heating; or B₂O₃ + 3C + 3F₂ → 2BF₃ + 3CO; pure BF₃ in the laboratory by heating benzenediazonium tetrafluoroborate: C₆H₅N₂BF₄ → BF₃ + C₆H₅F + N₂. Properties: BF₃ is planar (sp²) and electron-deficient, so it is a Lewis acid: BF₃ + NH₃ → F₃B←NH₃, BF₃ + H₂O → F₃B←OH₂, and with F⁻ it forms [BF₄]⁻. It hydrolyses to boric acid, which reacts with the HF formed to give fluoroboric acid; overall 4BF₃ + 3H₂O → H₃BO₃ + 3H⁺ + 3[BF₄]⁻ (check: B 4; F 12; H 6 = 3 + 3; O 3). Uses: making HBF₄, a catalyst in organic chemistry; a fluorinating reagent.

Worked example: mass of hydrogen from diborane

What mass of hydrogen forms when 2.77 g of B₂H₆ reacts completely with water? Use B = 10.81, H = 1.008. Working: M(B₂H₆) = 2 × 10.81 + 6 × 1.008 = 21.62 + 6.05 = 27.67 g mol⁻¹, so 2.77 g = 0.100 mol. B₂H₆ + 6H₂O → 2H₃BO₃ + 6H₂ gives 6 × 0.100 = 0.600 mol H₂ = 0.600 × 2.016 = 1.21 g. Half of this hydrogen came from the water, half from the diborane.

Key takeaways: boric acid is a weak monobasic Lewis acid (accepts OH⁻), layered by hydrogen bonds, identified by the green flame of ethyl borate. Diborane has 12 valence electrons: four 2c-2e terminal bonds and two 3c-2e banana bonds; it hydrolyses, hydroborates alkenes and gives borazine with ammonia. BF₃ is a planar Lewis acid.

Check your understanding

  1. 1. Boric acid is an acid because its molecule

    1. contains a replaceable H⁺ ion
    2. gives up a proton directly
    3. accepts OH⁻ from water, releasing a proton
    4. combines with a proton to form water
    Show answer

    Answer: C. B(OH)₃ + 2H₂O ⇌ [B(OH)₄]⁻ + H₃O⁺. Boron accepts OH⁻ (Lewis acid), and the proton left from the water makes the solution acidic. It does not release its own proton.

  2. 2. In diborane, how many electrons are used in the banana (bridge) bonds?

    1. Two
    2. Six
    3. Eight
    4. Four
    Show answer

    Answer: D. There are two B–H–B bridges, each a 3-centre 2-electron bond, so 2 × 2 = 4 electrons. The remaining 8 of the 12 valence electrons form the four terminal B–H bonds.

  3. 3. The vapour that burns with a green-edged flame in the test for borate is

    1. triethyl borate
    2. boron trifluoride
    3. diborane
    4. boric anhydride
    Show answer

    Answer: A. H₃BO₃ + 3C₂H₅OH → B(OC₂H₅)₃ + 3H₂O (conc. H₂SO₄). The volatile ester triethyl borate burns with a green-edged flame.

  4. 4. Heating boric acid at 373 K gives

    1. B₂O₃
    2. HBO₂
    3. H₂B₄O₇
    4. B
    Show answer

    Answer: B. At 373 K, H₃BO₃ loses one water to form metaboric acid HBO₂ (4H₃BO₃ → 4HBO₂ + 4H₂O). At 413 K tetraboric acid forms, and at red heat B₂O₃.

  5. 5. Which product forms when diborane is heated with ammonia in a closed vessel?

    1. Boron nitride only
    2. Sodium borohydride
    3. Borazine, B₃N₃H₆
    4. Boric acid
    Show answer

    Answer: C. Diborane diammoniate, 3B₂H₆·2NH₃, gives 2B₃N₃H₆ + 12H₂ on heating; borazine is the 'inorganic benzene'.

Privacy · Terms · Refunds · Delivery