• Practice
  • About 30 min
  • 15 practice questions

Final self-assessment: Transition and Inner Transition Elements

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, note your answers, then check them against the explanations. The questions mix all five lessons and are harder on average than the lesson checks.

Final self-assessment

  1. 1. Which statement about the 3d series is correct?

    1. Atomic radius falls steadily from Sc to Zn.
    2. Zn has an incomplete 3d subshell.
    3. Cr and Cu have one 4s electron because d⁵ and d¹⁰ are extra stable.
    4. Melting point rises steadily from Sc to Zn.
    Show answer

    Answer: C. Cr is 3d⁵ 4s¹ and Cu 3d¹⁰ 4s¹ because half-filled and full d subshells are extra stable. Radii are nearly constant from V to Cu, Zn is 3d¹⁰, and melting points peak mid-series.

  2. 2. Which pair has nearly identical atomic radii?

    1. Ti and Zr
    2. Zr and Hf
    3. Sc and Y
    4. Cr and Mo
    Show answer

    Answer: B. Because of the lanthanoid contraction, Hf (5d) is almost the same size as Zr (4d): textbook values 145 pm and 144 pm. Ti is much smaller (132 pm).

  3. 3. From IE values Ni 737, 1753, 3395, 5297 and Pt 864, 1791, 2800, 4150 kJ mol⁻¹, the energy to form Pt⁴⁺ is

    1. 9605 kJ mol⁻¹
    2. 11,182 kJ mol⁻¹
    3. 2655 kJ mol⁻¹
    4. 6950 kJ mol⁻¹
    Show answer

    Answer: A. Sum for Pt: 864 + 1791 + 2800 + 4150 = 9605 kJ mol⁻¹, less than for Ni⁴⁺ (11,182), so Pt(IV) compounds are more stable than Ni(IV) compounds.

  4. 4. Which is the strongest reducing agent in water?

    1. Fe²⁺
    2. Mn²⁺
    3. Co²⁺
    4. Cr²⁺
    Show answer

    Answer: D. E°(Cr³⁺/Cr²⁺) is negative (−0.41 V), so Cr²⁺ is readily oxidised to stable Cr³⁺ (3d³). For Mn, Fe and Co the M³⁺/M²⁺ potentials are positive (+1.51, +0.77, +1.81 V), so their M²⁺ ions are much harder to oxidise.

  5. 5. Which ion is a strong oxidising agent because its reduction gives a half-filled d subshell?

    1. Cr³⁺
    2. Fe²⁺
    3. Mn³⁺
    4. Ti³⁺
    Show answer

    Answer: C. Mn³⁺ (3d⁴) + e⁻ → Mn²⁺ (3d⁵, half-filled), E° = +1.51 V. This large positive value makes Mn³⁺ a strong oxidant.

  6. 6. An ion of a 3d metal has a spin-only moment of 2.83 BM. The number of unpaired electrons and a possible ion are

    1. 1; Cu²⁺
    2. 2; Ni²⁺
    3. 3; Cr³⁺
    4. 4; Fe²⁺
    Show answer

    Answer: B. n(n + 2) = 2.83² ≈ 8, so n = 2 (2 × 4 = 8). Ni²⁺ (3d⁸) has 2 unpaired electrons; so do V³⁺ and Ti²⁺.

  7. 7. The catalytic behaviour of transition metals and their compounds is mainly due to

    1. their magnetic behaviour
    2. their ability to adopt variable oxidation states and use their d orbitals
    3. their high density
    4. their high melting points
    Show answer

    Answer: B. Catalysis relies on available d orbitals to bind reactants and on variable oxidation states to transfer electrons (as with V₂O₅ in the contact process).

  8. 8. By the Hume-Rothery rules, which condition favours a substitutional alloy?

    1. Atomic radii differ by more than 25%.
    2. Different crystal structures.
    3. A large electronegativity difference.
    4. Atomic radii differ by less than 15%, with the same crystal structure and valence.
    Show answer

    Answer: D. A substitutional alloy needs similar sizes (less than 15% difference), the same crystal structure and valence, and nearly equal electronegativities.

  9. 9. How many moles of I₂ are liberated when 1 mol of K₂Cr₂O₇ reacts with excess acidified KI?

    1. 1
    2. 2
    3. 3
    4. 6
    Show answer

    Answer: C. Cr₂O₇²⁻ takes 6 electrons (2Cr: +6 → +3). Each I₂ needs 2 electrons from 2I⁻. 6 ÷ 2 = 3 mol I₂.

  10. 10. The number of moles of acidified KMnO₄ needed to oxidise 1 mol of ferrous oxalate, FeC₂O₄, is

    1. 0.6
    2. 5
    3. 3
    4. 1.5
    Show answer

    Answer: A. Fe²⁺ → Fe³⁺ gives 1 e⁻; C₂O₄²⁻ → 2CO₂ gives 2 e⁻; total 3 e⁻. MnO₄⁻ takes 5 e⁻, so 3/5 = 0.6 mol KMnO₄.

  11. 11. The correct order of increasing oxidising power is

    1. Cr₂O₇²⁻ < VO₂⁺ < MnO₄⁻
    2. MnO₄⁻ < Cr₂O₇²⁻ < VO₂⁺
    3. VO₂⁺ < Cr₂O₇²⁻ < MnO₄⁻
    4. Cr₂O₇²⁻ < MnO₄⁻ < VO₂⁺
    Show answer

    Answer: C. Standard reduction potentials rise in the order VO₂⁺/VO²⁺ (about +1.0 V) < Cr₂O₇²⁻/Cr³⁺ (about +1.33 V) < MnO₄⁻/Mn²⁺ (about +1.51 V), so oxidising power increases VO₂⁺ < Cr₂O₇²⁻ < MnO₄⁻.

  12. 12. In the manufacture of KMnO₄, the green compound formed by fusing MnO₂ with KOH in air is

    1. KMnO₄
    2. K₂MnO₄
    3. Mn₂O₇
    4. MnSO₄
    Show answer

    Answer: B. 2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O. Potassium manganate (Mn +6) is green; it is then oxidised to purple permanganate (Mn +7).

  13. 13. Which statement about the lanthanoids is incorrect?

    1. Europium shows a +2 oxidation state.
    2. Basicity decreases as ionic radius decreases from Pr to Lu.
    3. Ce⁴⁺ solutions are used as oxidising agents.
    4. Lanthanoid ions become larger from Ce³⁺ to Lu³⁺.
    Show answer

    Answer: D. The lanthanoid contraction makes Ln³⁺ ions smaller, not larger, from Ce³⁺ to Lu³⁺. The other statements are correct.

  14. 14. The electronic configuration of Ce⁴⁺ is

    1. [Xe]₄f¹
    2. [Xe]₄f²
    3. [Xe]
    4. [Xe]₄f¹ 5d¹
    Show answer

    Answer: C. Ce is [Xe]₄f¹ 5d¹ 6s². Removing four electrons (6s², 5d¹, 4f¹) leaves [Xe]₄f⁰, i.e. the xenon core.

  15. 15. Which property is shown by actinoids but not by lanthanoids?

    1. A common +3 oxidation state
    2. Formation of oxo cations such as UO₂²⁺
    3. Filling of an f subshell
    4. Decrease in size along the series
    Show answer

    Answer: B. Both series show +3, fill f orbitals and contract across the series. Only actinoids form oxo cations like UO₂²⁺ and NpO₂²⁺, because their 5f electrons are available for bonding and they reach higher oxidation states.

Questions 1-3: lesson 1 (configuration, size, ionisation enthalpy). Questions 4-5: lesson 2 (oxidation states and electrode potentials). Questions 6-8: lesson 3 (magnetism, catalysis, alloys). Questions 9-12: lesson 4 (K2Cr2O7 and KMnO4). Questions 13-15: lesson 5 (lanthanoids and actinoids).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery