- Practice
- About 28 min
- 5 practice questions
Electrolysis, Faraday's laws, batteries, fuel cells and corrosion
Describe the electrolysis of molten NaCl, apply Faraday's laws m = ZIt and Z = M/nF, explain the chemistry of Leclanche, mercury, lead storage and lithium-ion cells and the H₂-O₂ fuel cell, and explain rusting and its prevention.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write the electrode reactions for the electrolysis of molten NaCl and explain the minimum voltage needed.
- State Faraday's first and second laws and calculate masses, charges and times.
- Write the electrode reactions of primary and secondary batteries and of the hydrogen-oxygen fuel cell.
- Explain rusting as an electrochemical process and describe ways to prevent corrosion.
A galvanic cell runs a spontaneous reaction to give electricity. Turn this round and electricity can force a non-spontaneous reaction, such as splitting sodium chloride into sodium and chlorine. The same ideas explain how batteries are built and why iron rusts.
Electrolysis of molten sodium chloride
Electrolysis uses electrical energy to make a non-spontaneous reaction happen, often to decompose a compound into its elements, in an electrolytic cell. In the cell for molten NaCl, a cylindrical steel cathode and a graphite anode dip in the melt and are joined to a DC supply. The electrode joined to the negative end is the cathode; the one joined to the positive end is the anode.
- Cathode (reduction): Na⁺(l) + e⁻ → Na(l), E° = −2.71 V.
- Anode (oxidation): 2Cl⁻(l) → Cl₂(g) + 2e⁻, E° = −1.36 V.
- Overall: 2Na⁺(l) + 2Cl⁻(l) → 2Na(l) + Cl₂(g), E° = −2.71 + (−1.36) = −4.07 V.
The negative E° shows the reaction is not spontaneous, so a voltage greater than 4.07 V must be applied. As in a galvanic cell, oxidation occurs at the anode and reduction at the cathode, but the signs are reversed: in an electrolytic cell the cathode is negative and the anode positive.
Faraday's laws of electrolysis
First law: the mass m of a substance liberated at an electrode is directly proportional to the quantity of charge Q passed. Since Q = It, m = ZIt, where Z is the electrochemical equivalent: the mass deposited or liberated by one coulomb. For Mⁿ⁺ + ne⁻ → M, one mole of M needs n moles of electrons, that is nF coulombs, so Z = molar mass ÷ (n × 96 500) = equivalent mass ÷ 96 500.
Second law: when the same quantity of charge passes through different electrolytes (cells joined in series), the masses liberated are proportional to their electrochemical equivalents (and so to their equivalent masses): m₁/Z₁ = m₂/Z₂ = m₃/Z₃.
m = ZIt, with Z = M/(nF). Moles of product = It/(nF). Same charge in series: m₁/m₂ = E₁/E₂ (equivalent masses).
Worked example 1: copper deposited
A current of 2.0 A passes through CuSO₄ solution for 30 minutes. Find the mass of copper deposited (Cu = 63.5 g mol⁻¹). Working: Cu²⁺ + 2e⁻ → Cu, n = 2. Q = It = 2.0 A × (30 × 60 s) = 3600 C. m = M × Q ÷ (nF) = 63.5 × 3600 ÷ (2 × 96 500) = 228 600 ÷ 193 000 = 1.18 g.
Worked example 2: second law and time
(a) Cells of AgNO₃ and CuSO₄ in series: 1.08 g of silver is deposited. How much copper? Equivalent masses: Ag = 108/1 = 108, Cu = 63.5/2 = 31.75. m(Cu) = 1.08 × 31.75 ÷ 108 = 0.3175 g. (b) How long must 2.0 A flow through molten NaCl to make 0.05 mol Cl₂? 2Cl⁻ → Cl₂ + 2e⁻, so charge = 0.05 × 2 × 96 500 = 9650 C. t = Q ÷ I = 9650 ÷ 2.0 = 4825 s ≈ 80.4 minutes.
Batteries
Batteries supply direct current at a nearly constant voltage. Primary batteries cannot be recharged; secondary batteries can, because their cell reaction can be reversed by applying a voltage slightly greater than their own emf.
| Battery | Anode | Cathode | Electrolyte | emf (about) | Type |
|---|---|---|---|---|---|
| Leclanche (dry) cell | Zinc container | Graphite rod in contact with MnO₂ | NH₄Cl and ZnCl₂ in water | 1.5 V | Primary |
| Mercury button cell | Zinc amalgamated with mercury | HgO mixed with graphite | Paste of KOH and ZnO | 1.35 V | Primary |
| Lead storage battery | Spongy lead | Lead plate bearing PbO₂ | 38% H₂SO₄ by mass (density 1.2 g mL⁻¹) | 2 V per cell | Secondary |
| Lithium-ion battery | Porous graphite | Transition metal oxide such as CoO₂ | Lithium salt in an organic solvent | not given | Secondary |
Leclanche cell. Anode: Zn(s) → Zn²⁺(aq) + 2e⁻. Cathode: 2NH₄⁺(aq) + 2e⁻ → 2NH₃(aq) + H₂(g), and the hydrogen is oxidised by MnO₂: H₂(g) + 2MnO₂(s) → Mn₂O₃(s) + H₂O(l). Overall: Zn + 2NH₄⁺ + 2MnO₂ → Zn²⁺ + Mn₂O₃ + H₂O + 2NH₃ (check: 2 N, 8 H, 2 Mn, 4 O and charge +2 on each side). The ammonia joins Zn²⁺ as [Zn(NH₃)₄]²⁺; as NH₄⁺ is used up, the emf falls.
Mercury button cell. Anode: Zn(s) + 2OH⁻(aq) → ZnO(s) + H₂O(l) + 2e⁻. Cathode: HgO(s) + H₂O(l) + 2e⁻ → Hg(l) + 2OH⁻(aq). Overall: Zn(s) + HgO(s) → ZnO(s) + Hg(l). It has a high capacity and long life and is used in pacemakers, watches and cameras.
Lead storage battery (discharge). Anode: Pb(s) + SO₄²⁻(aq) → PbSO₄(s) + 2e⁻. Cathode: PbO₂(s) + 4H⁺(aq) + SO₄²⁻(aq) + 2e⁻ → PbSO₄(s) + 2H₂O(l). Overall: Pb + PbO₂ + 4H⁺ + 2SO₄²⁻ → 2PbSO₄ + 2H₂O (check: 2 Pb, 2 S, 10 O, 4 H; charge 4 − 4 = 0 on the left). Sulphuric acid is used up, so its concentration and the emf fall; at about 1.8 V the cell is recharged. On recharging, a voltage above 2 V reverses both reactions: at the former anode PbSO₄ is reduced to Pb, and at the former cathode PbSO₄ is oxidised to PbO₂, regenerating H₂SO₄. Six cells in series give 12 V, used in vehicles and inverters.
Lithium-ion battery. Anode: Li(s) → Li⁺ + e⁻. Cathode: Li⁺ + CoO₂(s) + e⁻ → LiCoO₂(s). Overall: Li + CoO₂ → LiCoO₂. Both electrodes let Li⁺ ions move in and out of their structures. On discharge Li⁺ moves through the non-aqueous electrolyte to the cathode; on charging it returns and is embedded in the graphite, a process called intercalation. Used in mobile phones, laptops and cameras.
The hydrogen-oxygen fuel cell
A fuel cell is a galvanic cell that converts the energy of combustion of a fuel directly into electrical energy; it needs a continuous supply of reactants. In the H₂-O₂ cell, hydrogen (fuel) and oxygen (oxidant) are bubbled over porous graphite electrodes containing Ni and NiO, in aqueous KOH (according to the textbook kept at 200 °C and 20-40 atm). Anode: 2H₂(g) + 4OH⁻(aq) → 4H₂O(l) + 4e⁻. Cathode: O₂(g) + 2H₂O(l) + 4e⁻ → 4OH⁻(aq). Overall: 2H₂(g) + O₂(g) → 2H₂O(l), the same as burning hydrogen, except that the two gases never react directly. Propane-O₂ and methane-O₂ fuel cells have also been developed.
Corrosion
Corrosion is the redox process in which a metal is oxidised by oxygen in the presence of moisture and deteriorates, such as the rusting of iron or the green film on copper and brass. Rusting is electrochemical. A water droplet on iron forms a tiny galvanic cell: the region under the droplet has little oxygen and becomes the anode; the surrounding surface, rich in oxygen, is the cathode.
- Anode: 2Fe(s) → 2Fe²⁺(aq) + 4e⁻ (oxidation potential +0.44 V).
- Cathode: O₂(g) + 4H⁺(aq) + 4e⁻ → 2H₂O(l), E° = +1.23 V; the H⁺ comes from carbonic acid formed by CO₂ dissolving in the water.
- Overall: 2Fe + O₂ + 4H⁺ → 2Fe²⁺ + 2H₂O, E° = 0.44 + 1.23 = 1.67 V: positive, so spontaneous.
- Fe²⁺ is oxidised further: 4Fe²⁺ + O₂ + 4H⁺ → 4Fe³⁺ + 2H₂O, then 2Fe³⁺ + (3 + x)H₂O → Fe₂O₃·xH₂O (rust) + 6H⁺.
Aluminium is also oxidised (Al → Al³⁺ + 3e⁻), but the Al₂O₃ formed sticks as a protective film and stops further corrosion. Copper and silver corrode more slowly than iron.
Ways to protect a metal from corrosion
-
Barrier coating
- Paint the surface
- Galvanising: coat iron with zinc, which is oxidised instead of iron
-
Cathodic protection
- Join Mg or Zn as a sacrificial anode
- Iron becomes the cathode and is protected
-
Passivation
- Treat with a strong oxidising agent such as concentrated HNO₃
- A protective oxide layer forms
-
Alloying
- Alloy iron with a more anodic metal
- Stainless steel: iron with chromium
Key takeaways: electrolysis drives a non-spontaneous reaction; molten NaCl needs more than 4.07 V. m = ZIt and Z = M/(nF); in series, masses go as equivalent masses. Primary cells (Leclanche, mercury) cannot be recharged; secondary cells (lead storage, Li-ion) can. Fuel cells turn combustion energy straight into electricity. Rusting is an electrochemical cell on the iron surface, prevented by coatings, sacrificial anodes, passivation or alloying.
Check your understanding
-
1. In the electrolysis of molten NaCl, what is formed at the cathode?
- Chlorine gas
- Hydrogen gas
- Oxygen gas
- Liquid sodium
Show answer
Answer: D. The cathode is joined to the negative terminal; Na⁺ ions are attracted to it and reduced: Na⁺ + e⁻ → Na(l). Chlorine is formed at the anode. With no water present, no hydrogen or oxygen forms.
-
2. What mass of silver is deposited when 0.5 A passes through AgNO₃ solution for 32 minutes 10 seconds? (Ag = 108 g mol⁻¹)
- 0.54 g
- 1.08 g
- 2.16 g
- 0.27 g
Show answer
Answer: B. t = 32 × 60 + 10 = 1930 s; Q = 0.5 × 1930 = 965 C = 965 ÷ 96 500 = 0.01 F. Ag⁺ + e⁻ → Ag needs 1 F per mole, so 0.01 mol Ag = 0.01 × 108 = 1.08 g.
-
3. Which of these is a secondary (rechargeable) battery?
- Lead storage battery
- Leclanche cell
- Mercury button cell
- Hydrogen-oxygen fuel cell
Show answer
Answer: A. In the lead storage battery the discharge reaction can be reversed by applying more than 2 V, regenerating Pb, PbO₂ and H₂SO₄. Leclanche and mercury cells are primary cells, and a fuel cell is not recharged: it is fed with fuel continuously.
-
4. What is the reaction at the cathode of the hydrogen-oxygen fuel cell?
- 2H₂ + 4OH⁻ → 4H₂O + 4e⁻
- H⁺ + OH⁻ → H₂O
- O₂ + 2H₂O + 4e⁻ → 4OH⁻
- 2H₂ + O₂ → 2H₂O
Show answer
Answer: C. Reduction happens at the cathode: oxygen gains electrons and, in alkaline KOH, forms hydroxide ions. The first equation is the anode reaction and the last is the overall reaction.
-
5. Why does a zinc coating protect iron even after the coating is scratched?
- Zinc has a higher melting point than iron.
- Zinc has a more negative reduction potential, so it is oxidised in preference to iron.
- Zinc is a better conductor of electricity than iron.
- Zinc forms an alloy with the iron.
Show answer
Answer: B. E°(Zn²⁺/Zn) = −0.76 V is more negative than E°(Fe²⁺/Fe) = −0.44 V, so zinc is the stronger reducing agent and corrodes first, acting as a sacrificial anode while iron stays as the cathode.
Sign in to keep track of the lessons you finish.