• Practice
  • About 25 min
  • 5 practice questions

Thermodynamics of cell reactions and the Nernst equation

Relate cell emf to Gibbs energy and the equilibrium constant through ΔG = −nFE and E° = (2.303RT/nF) log K, derive the Nernst equation and use it to calculate cell and electrode potentials at any concentration.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Show that one faraday is about 96 500 C and that the electrical energy of a cell is nFEcell.
  • Use ΔG = −nFEcell and ΔG° = −nFE°cell to judge spontaneity.
  • Calculate an equilibrium constant from E°cell.
  • Derive the Nernst equation and use E = E° − (0.0591/n) log Q at 25 °C.

A cell's emf is not just a number on a voltmeter: it measures how far the cell reaction is from equilibrium and how much useful work it can do. This lesson links electrochemistry to the thermodynamics you studied in Class 11.

Electrical energy and the faraday

The electrical energy produced by a cell = total charge of the electrons × Ecell. If n moles of electrons pass in the overall reaction, the charge is n × (charge of one mole of electrons). That charge is one faraday (F): 6.023 × 10²³ × 1.602 × 10⁻¹⁹ C ≈ 96 488 C, taken as 1 F ≈ 96 500 C mol⁻¹. So electrical energy = nFEcell.

Gibbs energy and emf

The maximum work obtainable from the cell is Wmax = −nFEcell (the minus sign shows that the system does work on the surroundings). By the second law of thermodynamics, the maximum useful work equals the change in Gibbs free energy, so:

ΔG = −nFEcell, and in the standard state ΔG° = −nFE°cell. Since ΔG° = −RT ln K, E°cell = (2.303RT/nF) log K = (0.0591/n) log K at 298 K.

A spontaneous reaction has a negative ΔG, which needs a positive Ecell. A negative Ecell means the reaction is not spontaneous as written (its reverse is).

Worked example 1: ΔG° and K for the Daniel cell

Zn + Cu²⁺ → Zn²⁺ + Cu, n = 2, E°cell = 1.10 V. Working: ΔG° = −nFE° = −2 × 96 500 C mol⁻¹ × 1.10 V = −212 300 J mol⁻¹ = −212.3 kJ mol⁻¹. log K = nE° ÷ 0.0591 = (2 × 1.10) ÷ 0.0591 = 37.22, so K = 10³⁷·²² = 10⁰·²² × 10³⁷ ≈ 1.7 × 10³⁷. Such a huge K means the reaction goes essentially to completion.

The Nernst equation

For a cell reaction xA + yB ⇌ lC + mD, the reaction quotient is Q = [C]ˡ[D]ᵐ ÷ ([A]ˣ[B]ʸ). From thermodynamics, ΔG = ΔG° + RT ln Q. Substituting ΔG = −nFEcell and ΔG° = −nFE°cell gives −nFEcell = −nFE°cell + RT ln Q. Dividing every term by −nF:

Ecell = E°cell − (RT/nF) ln Q = E°cell − (2.303RT/nF) log Q. At 25 °C: Ecell = E°cell − (0.0591/n) log Q.

— Nernst equation

The factor 0.0591 V comes from 2.303 × 8.314 J K⁻¹ mol⁻¹ × 298 K ÷ 96 500 C mol⁻¹ = 0.0591 V. Pure solids and liquids are left out of Q (their activity is 1).

Using the Nernst equation

  1. Write the cell reaction anode oxidation + cathode reduction
  2. Find n electrons transferred in the balanced equation
  3. Find E°cell E°(cathode) − E°(anode)
  4. Write Q products over reactants; leave out solids
  5. Ecell E°cell − (0.0591/n) log Q

Worked example 2: a Daniel cell away from 1 M

Find E for Zn | Zn²⁺(0.1 M) || Cu²⁺(0.001 M) | Cu at 25 °C (E° = 1.10 V). Working: Zn + Cu²⁺ → Zn²⁺ + Cu, n = 2. Q = [Zn²⁺] ÷ [Cu²⁺] = 0.1 ÷ 0.001 = 100, log Q = 2. E = 1.10 − (0.0591/2) × 2 = 1.10 − 0.0591 = 1.04 V. With less Cu²⁺ (a reactant) and more Zn²⁺ (a product), the emf drops below E°.

Worked example 3: a single electrode

Find the reduction potential of copper dipped in 0.01 M CuSO₄ at 25 °C (E°(Cu²⁺/Cu) = 0.34 V). Working: Cu²⁺ + 2e⁻ → Cu, n = 2, Q = 1/[Cu²⁺] = 1/0.01 = 100. E = 0.34 − (0.0591/2) log 100 = 0.34 − 0.02955 × 2 = 0.34 − 0.0591 = 0.281 V. A more dilute solution gives a less positive reduction potential.

Worked example 4: unequal coefficients

Find E for Mg | Mg²⁺(0.001 M) || Ag⁺(0.01 M) | Ag at 25 °C (E° = 3.16 V from the previous lesson). Working: Mg + 2Ag⁺ → Mg²⁺ + 2Ag (check: charge +2 each side), n = 2. Q = [Mg²⁺] ÷ [Ag⁺]² = 0.001 ÷ (0.01)² = 10⁻³ ÷ 10⁻⁴ = 10, log Q = 1. E = 3.16 − (0.0591/2) × 1 = 3.16 − 0.030 = 3.13 V. The coefficient 2 becomes a square in Q.

Key takeaways: 1 F ≈ 96 500 C mol⁻¹. ΔG = −nFE: a positive emf means a spontaneous reaction. E°cell = (0.0591/n) log K at 298 K. The Nernst equation, E = E° − (0.0591/n) log Q, gives the emf at any concentration; at equilibrium E = 0 and Q = K.

Check your understanding

  1. 1. A cell reaction has E°cell = +0.50 V and n = 2. What is ΔG°?

    1. −96.5 kJ mol⁻¹
    2. +96.5 kJ mol⁻¹
    3. −48.25 kJ mol⁻¹
    4. −193 kJ mol⁻¹
    Show answer

    Answer: A. ΔG° = −nFE° = −2 × 96 500 × 0.50 = −96 500 J mol⁻¹ = −96.5 kJ mol⁻¹. The negative sign shows that the reaction is spontaneous.

  2. 2. Which pair of signs belongs to a spontaneous cell reaction?

    1. ΔG positive, Ecell positive
    2. ΔG negative, Ecell negative
    3. ΔG positive, Ecell negative
    4. ΔG negative, Ecell positive
    Show answer

    Answer: D. From ΔG = −nFEcell, with n and F positive, ΔG and Ecell always have opposite signs. Spontaneous means ΔG < 0, so Ecell > 0.

  3. 3. For a one-electron cell reaction at 298 K, E°cell = 0.0591 V. What is the equilibrium constant?

    1. 1
    2. 10
    3. 0.0591
    4. 100
    Show answer

    Answer: B. log K = nE° ÷ 0.0591 = (1 × 0.0591) ÷ 0.0591 = 1, so K = 10¹ = 10.

  4. 4. In a Daniel cell (E° = 1.10 V), [Cu²⁺] is made 100 times smaller while [Zn²⁺] stays at 1 M. What happens to E at 25 °C?

    1. It rises by 0.0591 V.
    2. It does not change.
    3. It falls by 0.0591 V.
    4. It falls by 0.118 V.
    Show answer

    Answer: C. Q = [Zn²⁺]/[Cu²⁺] becomes 100 times larger, so log Q rises by 2. ΔE = −(0.0591/2) × 2 = −0.0591 V: the emf falls by 0.0591 V to 1.04 V.

  5. 5. What is the potential of a Zn²⁺/Zn electrode in 0.001 M Zn²⁺ at 25 °C? (E° = −0.76 V)

    1. −0.67 V
    2. −0.73 V
    3. −0.85 V
    4. −0.79 V
    Show answer

    Answer: C. Zn²⁺ + 2e⁻ → Zn, n = 2, Q = 1/[Zn²⁺] = 1000, log Q = 3. E = −0.76 − (0.0591/2) × 3 = −0.76 − 0.0887 = −0.849 ≈ −0.85 V.

Privacy · Terms · Refunds · Delivery